From: "G, Manjunath Kondaiah" <manjugk@ti.com>
To: devicetree-discuss@lists.ozlabs.org
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
grant.likely@secretlab.ca
Subject: [RFC/PATCH v2 00/13] dt: omap: dt binding with omap_device and support for i2c1
Date: Tue, 23 Aug 2011 10:03:28 +0500 [thread overview]
Message-ID: <1314074021-25186-1-git-send-email-manjugk@ti.com> (raw)
Patch series reworked from:
http://permalink.gmane.org/gmane.linux.ports.arm.omap/61674
Also added support for i2c1 controller on omap4 based panda
board.
Baseline:
=========
git://git.secretlab.ca/git/linux-2.6.git
Branch: devicetree/test
The above branch is rebased with v3.1-rc2 mainline.
+
pdev decoupling patches from kevin hilman
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg53534.html
The patch series is also available at:
https://gitorious.org/devicetree/dt_omap/commits/devicetree/dt_rfcv2
Testing:
========
Build : dt and not dt build for omap2plus_defconfig
Boot: OMAP3530 Beagle Board and OMAP4430 Panda board
Limitation:
===========
The current implementation of omap-device build through
device tree supports only single instance of hwmod and
multiple instances are not supported.
G, Manjunath Kondaiah (13):
OMAP: omap_device: Add device tree node pointer
dt: Add pd_size to AUXDATA structure
dt: omap3: add soc file for handling i2c controllers
dt: omap3: beagle board: set clock freq for i2c devices
dt: omap3: add generic board file for dt support
dt: omap3: add omap-device compatible property
dt: omap: create platform bus for omap devices
dt: omap: i2c: add dt support for i2c1 controller
dt: omap4: add soc file for handling i2c controllers
dt: omap4: panda board: set clock freq for i2c devices
dt: omap4: add generic board file for dt support
dt: omap4: enable dt support for i2c1 controller
dt: omap: i2c: dt usage model documentation
Documentation/devicetree/bindings/i2c/omap-i2c.txt | 57 +++++++++++++
arch/arm/boot/dts/omap3-beagle-nunchuck.dts | 13 +---
arch/arm/boot/dts/omap3-beagle.dts | 18 ++++-
arch/arm/boot/dts/omap3.dtsi | 62 ++++++++++++++
arch/arm/boot/dts/omap4-panda.dts | 25 ++++--
arch/arm/boot/dts/omap4.dtsi | 68 ++++++++++++++++
arch/arm/mach-omap2/Kconfig | 22 +++++
arch/arm/mach-omap2/Makefile | 2 +
arch/arm/mach-omap2/board-omap3-dt.c | 84 ++++++++++++++++++++
arch/arm/mach-omap2/board-omap3beagle.c | 13 ---
arch/arm/mach-omap2/board-omap4-dt.c | 75 +++++++++++++++++
arch/arm/mach-omap2/board-omap4panda.c | 6 --
arch/arm/mach-omap2/devices.c | 2 +-
arch/arm/mach-omap2/mcbsp.c | 2 +-
arch/arm/plat-omap/include/plat/omap_device.h | 11 +++-
arch/arm/plat-omap/omap_device.c | 46 ++++++++++-
drivers/i2c/busses/i2c-omap.c | 23 +++++-
drivers/of/platform.c | 41 ++++++++++
include/linux/of_platform.h | 5 +
19 files changed, 526 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/omap-i2c.txt
create mode 100644 arch/arm/boot/dts/omap3.dtsi
create mode 100644 arch/arm/boot/dts/omap4.dtsi
create mode 100644 arch/arm/mach-omap2/board-omap3-dt.c
create mode 100644 arch/arm/mach-omap2/board-omap4-dt.c
--
1.7.4.1
next reply other threads:[~2011-08-23 5:03 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-23 5:03 G, Manjunath Kondaiah [this message]
2011-08-23 5:03 ` [RFC/PATCH v2 01/13] OMAP: omap_device: Add device tree node pointer G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 02/13] dt: Add pd_size to AUXDATA structure G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 03/13] dt: omap3: add soc file for handling i2c controllers G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 04/13] dt: omap3: beagle board: set clock freq for i2c devices G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 05/13] dt: omap3: add generic board file for dt support G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 06/13] dt: omap3: add omap-device compatible property G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 07/13] dt: omap: create platform bus for omap devices G, Manjunath Kondaiah
2011-08-23 9:07 ` Jamie Iles
2011-08-23 15:19 ` G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller G, Manjunath Kondaiah
2011-08-23 15:46 ` G, Manjunath Kondaiah
2011-09-01 17:34 ` Cousson, Benoit
2011-09-02 3:22 ` G, Manjunath Kondaiah
[not found] ` <4E537F53.4030405@ti.com>
2011-08-23 19:15 ` Fwd: " Cousson, Benoit
2011-08-23 5:03 ` [RFC/PATCH v2 09/13] dt: omap4: add soc file for handling i2c controllers G, Manjunath Kondaiah
2011-08-23 8:23 ` Rajendra Nayak
2011-08-23 15:11 ` G, Manjunath Kondaiah
[not found] ` <4E537FA7.3050609@ti.com>
2011-08-23 13:48 ` Fwd: " Cousson, Benoit
2011-08-23 15:18 ` G, Manjunath Kondaiah
2011-08-23 19:45 ` Cousson, Benoit
2011-08-23 5:03 ` [RFC/PATCH v2 10/13] dt: omap4: panda board: set clock freq for i2c devices G, Manjunath Kondaiah
[not found] ` <4E537F6B.4060608@ti.com>
2011-08-23 19:03 ` Cousson, Benoit
2011-08-23 19:15 ` G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 11/13] dt: omap4: add generic board file for dt support G, Manjunath Kondaiah
[not found] ` <4E537F80.1060001@ti.com>
[not found] ` <4E537F80.1060001-l0cyMroinI0@public.gmane.org>
2011-08-23 13:05 ` Fwd: " Cousson, Benoit
2011-08-23 15:30 ` G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 12/13] dt: omap4: enable dt support for i2c1 controller G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 13/13] dt: omap: i2c: dt usage model documentation G, Manjunath Kondaiah
[not found] ` <4E537ECB.1060704@ti.com>
2011-08-23 12:38 ` [RFC/PATCH v2 00/13] dt: omap: dt binding with omap_device and support for i2c1 Cousson, Benoit
2011-08-23 15:41 ` G, Manjunath Kondaiah
2011-08-24 9:41 ` Cousson, Benoit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314074021-25186-1-git-send-email-manjugk@ti.com \
--to=manjugk@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).