From: "G, Manjunath Kondaiah" <manjugk@ti.com>
To: devicetree-discuss@lists.ozlabs.org
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
grant.likely@secretlab.ca
Subject: [RFC/PATCH v2 11/13] dt: omap4: add generic board file for dt support
Date: Tue, 23 Aug 2011 10:03:39 +0500 [thread overview]
Message-ID: <1314074021-25186-12-git-send-email-manjugk@ti.com> (raw)
In-Reply-To: 1314074021-25186-1-git-send-email-manjugk@ti.com
The generic board file is created and derived from omap4 panda board file.
The changes here focus on minimal configuration to boot panda board with
dt enabled which provides basic platform for converting device drivers for
using dt.
Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
---
arch/arm/boot/dts/omap4-panda.dts | 2 +-
arch/arm/mach-omap2/Kconfig | 11 +++++
arch/arm/mach-omap2/Makefile | 1 +
arch/arm/mach-omap2/board-omap4-dt.c | 66 ++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/board-omap4panda.c | 6 ---
5 files changed, 79 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/mach-omap2/board-omap4-dt.c
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 6b831ca..9d1b17c 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -2,7 +2,7 @@
/ {
model = "TI OMAP4 PandaBoard";
- compatible = "ti,omap4-panda", "ti,omap4430";
+ compatible = "ti,omap4-panda", "ti,omap4";
i2c1 {
clock-frequency = <400000>;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4fbb54d..853b14c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -337,6 +337,17 @@ config MACH_OMAP4_PANDA
select OMAP_PACKAGE_CBS
select REGULATOR_FIXED_VOLTAGE
+config MACH_OMAP4_DT
+ bool "Generic OMAP4 board(FDT support)"
+ depends on ARCH_OMAP4
+ select OMAP_PACKAGE_CBB
+ select USE_OF
+
+ help
+ Support for generic TI OMAP4 boards using Flattened Device Tree.
+ Say Y here to enable OMAP3 device tree support
+ More information at Documentation/devicetree
+
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e702e47..8b8c29c 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -198,6 +198,7 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_OMAP3_DT) += board-omap3-dt.o
+obj-$(CONFIG_MACH_OMAP4_DT) += board-omap4-dt.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
sdram-nokia.o
diff --git a/arch/arm/mach-omap2/board-omap4-dt.c b/arch/arm/mach-omap2/board-omap4-dt.c
new file mode 100644
index 0000000..a4d296c
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap4-dt.c
@@ -0,0 +1,66 @@
+/*
+ * TI OMAP3 device tree board support
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c/twl.h>
+
+#include <mach/omap4-common.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/common.h>
+
+#include "common-board-devices.h"
+
+static void __init omap4_init_early(void)
+{
+ omap2_init_common_infrastructure();
+ omap2_init_common_devices(NULL, NULL);
+}
+
+static struct twl4030_platform_data omap4_twldata = {
+ .irq_base = TWL6030_IRQ_BASE,
+ .irq_end = TWL6030_IRQ_END,
+};
+
+static int __init omap4_i2c_init(void)
+{
+ omap4_pmic_init("twl6030", &omap4_twldata);
+ return 0;
+}
+
+static void __init omap4_init(void)
+{
+ omap4_i2c_init();
+ omap_serial_init();
+}
+
+static void __init omap4_map_io(void)
+{
+ omap2_set_globals_443x();
+ omap44xx_map_common_io();
+}
+
+static const char *omap4_match[] __initdata = {
+ "ti,omap4",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP4_DT, "TI OMAP4 (Flattened Device Tree)")
+ .boot_params = 0x80000100,
+ .reserve = omap_reserve,
+ .map_io = omap4_map_io,
+ .init_early = omap4_init_early,
+ .init_irq = gic_init_irq,
+ .init_machine = omap4_init,
+ .timer = &omap4_timer,
+ .dt_compat = omap4_match,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 1c583c7..9aaa960 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -581,11 +581,6 @@ static void __init omap4_panda_map_io(void)
omap44xx_map_common_io();
}
-static const char *omap4_panda_match[] __initdata = {
- "ti,omap4-panda",
- NULL,
-};
-
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.boot_params = 0x80000100,
@@ -595,5 +590,4 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
- .dt_compat = omap4_panda_match,
MACHINE_END
--
1.7.4.1
next prev parent reply other threads:[~2011-08-23 5:03 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-23 5:03 [RFC/PATCH v2 00/13] dt: omap: dt binding with omap_device and support for i2c1 G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 01/13] OMAP: omap_device: Add device tree node pointer G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 02/13] dt: Add pd_size to AUXDATA structure G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 03/13] dt: omap3: add soc file for handling i2c controllers G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 04/13] dt: omap3: beagle board: set clock freq for i2c devices G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 05/13] dt: omap3: add generic board file for dt support G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 06/13] dt: omap3: add omap-device compatible property G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 07/13] dt: omap: create platform bus for omap devices G, Manjunath Kondaiah
2011-08-23 9:07 ` Jamie Iles
2011-08-23 15:19 ` G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller G, Manjunath Kondaiah
2011-08-23 15:46 ` G, Manjunath Kondaiah
2011-09-01 17:34 ` Cousson, Benoit
2011-09-02 3:22 ` G, Manjunath Kondaiah
[not found] ` <4E537F53.4030405@ti.com>
2011-08-23 19:15 ` Fwd: " Cousson, Benoit
2011-08-23 5:03 ` [RFC/PATCH v2 09/13] dt: omap4: add soc file for handling i2c controllers G, Manjunath Kondaiah
2011-08-23 8:23 ` Rajendra Nayak
2011-08-23 15:11 ` G, Manjunath Kondaiah
[not found] ` <4E537FA7.3050609@ti.com>
2011-08-23 13:48 ` Fwd: " Cousson, Benoit
2011-08-23 15:18 ` G, Manjunath Kondaiah
2011-08-23 19:45 ` Cousson, Benoit
2011-08-23 5:03 ` [RFC/PATCH v2 10/13] dt: omap4: panda board: set clock freq for i2c devices G, Manjunath Kondaiah
[not found] ` <4E537F6B.4060608@ti.com>
2011-08-23 19:03 ` Cousson, Benoit
2011-08-23 19:15 ` G, Manjunath Kondaiah
2011-08-23 5:03 ` G, Manjunath Kondaiah [this message]
[not found] ` <4E537F80.1060001@ti.com>
[not found] ` <4E537F80.1060001-l0cyMroinI0@public.gmane.org>
2011-08-23 13:05 ` Fwd: [RFC/PATCH v2 11/13] dt: omap4: add generic board file for dt support Cousson, Benoit
2011-08-23 15:30 ` G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 12/13] dt: omap4: enable dt support for i2c1 controller G, Manjunath Kondaiah
2011-08-23 5:03 ` [RFC/PATCH v2 13/13] dt: omap: i2c: dt usage model documentation G, Manjunath Kondaiah
[not found] ` <4E537ECB.1060704@ti.com>
2011-08-23 12:38 ` [RFC/PATCH v2 00/13] dt: omap: dt binding with omap_device and support for i2c1 Cousson, Benoit
2011-08-23 15:41 ` G, Manjunath Kondaiah
2011-08-24 9:41 ` Cousson, Benoit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314074021-25186-12-git-send-email-manjugk@ti.com \
--to=manjugk@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).