From: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board
Date: Wed, 24 Aug 2011 15:41:46 +0100 [thread overview]
Message-ID: <1314196906-20709-4-git-send-email-jamie@jamieiles.com> (raw)
In-Reply-To: <1314196906-20709-1-git-send-email-jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
The PC7302 board can be populated with either a PC3X2 or PC3X3 device.
Add DTS files for both variants of the PC7302.
Signed-off-by: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
---
arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts | 87 ++++++++++++++++++++++++
arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts | 93 ++++++++++++++++++++++++++
2 files changed, 180 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
create mode 100644 arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
new file mode 100644
index 0000000..4c9a7ba
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X2)";
+ compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk loglevel=9 root=ubi0:rootfs rw rootfstype=ubifs ubi.mtd=5,2048";
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@1 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&pclk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
new file mode 100644
index 0000000..381eb6a
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X3)";
+ compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk loglevel=9 root=ubi0:rootfs rw rootfstype=ubifs ubi.mtd=5,2048";
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@10 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+
+ clkgate: clkgate@800a0048 {
+ clock@4 {
+ picochip,clk-no-disable;
+ };
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&ebi_clk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
--
1.7.4.1
next prev parent reply other threads:[~2011-08-24 14:41 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-24 14:41 [PATCHv2 0/3] Initial support for Picochip picoxcell Jamie Iles
2011-08-24 14:41 ` [PATCHv2 2/3] picoxcell: add the DTS for pc3x2 and pc3x3 devices Jamie Iles
2011-09-01 6:30 ` Barry Song
[not found] ` <1314196906-20709-1-git-send-email-jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
2011-08-24 14:41 ` [PATCHv2 1/3] picoxcell: support for Picochip picoxcell devices Jamie Iles
2011-08-24 14:41 ` Jamie Iles [this message]
2011-09-01 6:36 ` [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board Barry Song
2011-09-01 7:58 ` Jamie Iles
[not found] ` <1314196906-20709-4-git-send-email-jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
2011-09-15 11:32 ` Benjamin Herrenschmidt
2011-09-15 12:15 ` Jamie Iles
[not found] ` <20110915121512.GG3089-apL1N+EY0C9YtYNIL7UdTEEOCMrvLtNR@public.gmane.org>
2011-09-23 2:31 ` Barry Song
[not found] ` <CAGsJ_4wniCS+85Hs7-vbaUyEL-yKEBnbgDOFPm0+THh6PMfCdw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-09-23 2:48 ` Benjamin Herrenschmidt
2011-09-15 8:43 ` [PATCHv2 0/3] Initial support for Picochip picoxcell Jamie Iles
2011-09-26 9:20 ` Jamie Iles
[not found] ` <20110926092008.GC3372-apL1N+EY0C9YtYNIL7UdTEEOCMrvLtNR@public.gmane.org>
2011-09-26 14:42 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314196906-20709-4-git-send-email-jamie@jamieiles.com \
--to=jamie-wmlquqddiekakbo8gow8eq@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).