devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Grant Likely
	<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
	Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
	Erik Gilling <konkers-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
	Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Belisko Marek
	<marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>,
	Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
	Sergei Shtylyov
	<sshtylyov-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>,
	Linus Walleij
	<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT
Date: Thu, 25 Aug 2011 17:43:31 -0600	[thread overview]
Message-ID: <1314315824-9687-1-git-send-email-swarren@nvidia.com> (raw)

v3:
* Build on Jamie Iles' patches to split some of the DT parsing into
  common code.
* Renamed some properties to remove "nvidia," from name; they can be
  generic.
* Support pins property, to apply DT nodes to multiple pins/groups
* Some minor error-message changes driven by some of the above.
* Removed requirement to #ifdef CONFIG_OF
* Removed AUXDATA table entries in mach-tegra/board-dt.c

TODO:
* Convert from using strings to using integers for the function and pin
  names. This relies on the dtc patches I posted yesterday, but should
  be pretty simple once they're in.

Jamie Iles (1):
  of: add a generic pinmux helper

Stephen Warren (12):
  arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
  docs/dt: Document nvidia,tegra20-gpio's nvidia,enabled-gpios property
  arm/dt: Tegra: Add nvidia,enabled-gpios property to GPIO controller
  docs/dt: Document nvidia,tegra20-pinmux binding
  arm/dt: Tegra: Add pinmux node
  dt: add empty for_each_child_of_node, of_find_property
  gpio/tegra: Convert to a platform device
  gpio/tegra: Add device tree support
  arm/tegra: Convert pinmux driver to a platform device
  of: add property iteration helpers
  arm/tegra: Add device tree support to pinmux driver
  arm/tegra: board-dt: Remove dependency on non-dt pinmux functions

 .../devicetree/bindings/gpio/gpio_nvidia.txt       |   20 ++
 .../devicetree/bindings/pinmux/pinmux_nvidia.txt   |  302 ++++++++++++++++++++
 arch/arm/boot/dts/tegra-harmony.dts                |  258 +++++++++++++++++
 arch/arm/boot/dts/tegra-seaboard.dts               |  247 ++++++++++++++++
 arch/arm/boot/dts/tegra20.dtsi                     |    5 +
 arch/arm/mach-tegra/Makefile                       |    1 -
 arch/arm/mach-tegra/board-dt.c                     |   10 -
 arch/arm/mach-tegra/board-harmony-pinmux.c         |    8 +
 arch/arm/mach-tegra/board-paz00-pinmux.c           |    8 +
 arch/arm/mach-tegra/board-seaboard-pinmux.c        |    9 +-
 arch/arm/mach-tegra/board-trimslice-pinmux.c       |    7 +
 arch/arm/mach-tegra/devices.c                      |   10 +
 arch/arm/mach-tegra/devices.h                      |    2 +
 arch/arm/mach-tegra/pinmux.c                       |  280 ++++++++++++++++++
 drivers/gpio/gpio-tegra.c                          |   48 +++-
 drivers/of/Kconfig                                 |    5 +
 drivers/of/Makefile                                |    1 +
 drivers/of/of_pinmux.c                             |  109 +++++++
 include/linux/of.h                                 |   10 +
 include/linux/of_iter_prop.h                       |  135 +++++++++
 include/linux/of_pinmux.h                          |   74 +++++
 21 files changed, 1524 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt
 create mode 100644 drivers/of/of_pinmux.c
 create mode 100644 include/linux/of_iter_prop.h
 create mode 100644 include/linux/of_pinmux.h

             reply	other threads:[~2011-08-25 23:43 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-25 23:43 Stephen Warren [this message]
     [not found] ` <1314315824-9687-1-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-08-25 23:43   ` [PATCH v3 01/13] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs Stephen Warren
2011-08-25 23:43   ` [PATCH v3 02/13] docs/dt: Document nvidia, tegra20-gpio's nvidia, enabled-gpios property Stephen Warren
2011-08-25 23:43   ` [PATCH v3 03/13] arm/dt: Tegra: Add nvidia, enabled-gpios property to GPIO controller Stephen Warren
2011-08-25 23:43   ` [PATCH v3 05/13] arm/dt: Tegra: Add pinmux node Stephen Warren
2011-08-25 23:43   ` [PATCH v3 07/13] gpio/tegra: Convert to a platform device Stephen Warren
2011-08-25 23:43   ` [PATCH v3 09/13] arm/tegra: Convert pinmux driver " Stephen Warren
2011-08-25 23:43   ` [PATCH v3 10/13] of: add a generic pinmux helper Stephen Warren
     [not found]     ` <1314315824-9687-11-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-08-26  9:16       ` Jamie Iles
2011-08-29 11:09       ` Linus Walleij
     [not found]         ` <CACRpkdaTiWEtgjVOhUKeXhpiESvrWyz97p5j_PHe3MvEM4UaCw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-29 21:46           ` Stephen Warren
     [not found]             ` <74CDBE0F657A3D45AFBB94109FB122FF04B3279BEB-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-09-01 11:30               ` Linus Walleij
2011-08-25 23:43   ` [PATCH v3 11/13] of: add property iteration helpers Stephen Warren
     [not found]     ` <1314315824-9687-12-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-08-26  9:26       ` Jamie Iles
     [not found]         ` <20110826092632.GB3926-apL1N+EY0C9YtYNIL7UdTEEOCMrvLtNR@public.gmane.org>
2011-08-26 15:59           ` Stephen Warren
     [not found]             ` <74CDBE0F657A3D45AFBB94109FB122FF04B24A40C8-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-08-26 16:16               ` Jamie Iles
2011-08-25 23:43   ` [PATCH v3 12/13] arm/tegra: Add device tree support to pinmux driver Stephen Warren
2011-08-25 23:43   ` [PATCH v3 13/13] arm/tegra: board-dt: Remove dependency on non-dt pinmux functions Stephen Warren
2011-08-26  5:04   ` [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT Olof Johansson
     [not found]     ` <CAOesGMiygfaNkPa7uURCiJpC=WDinWhKi07LFgJ+5JoGW_fLKw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-26 16:07       ` Stephen Warren
2011-08-25 23:43 ` [PATCH v3 04/13] docs/dt: Document nvidia,tegra20-pinmux binding Stephen Warren
2011-08-25 23:43 ` [PATCH v3 06/13] dt: add empty for_each_child_of_node, of_find_property Stephen Warren
     [not found]   ` <1314315824-9687-7-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-08-31 18:25     ` Stephen Warren
2011-08-25 23:43 ` [PATCH v3 08/13] gpio/tegra: Add device tree support Stephen Warren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1314315824-9687-1-git-send-email-swarren@nvidia.com \
    --to=swarren-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
    --cc=jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org \
    --cc=konkers-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
    --cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    --cc=shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=sshtylyov-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).