From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
Erik Gilling <konkers-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Sergei Shtylyov
<sshtylyov-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>,
Belisko Marek
<marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v3 01/13] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
Date: Thu, 25 Aug 2011 17:43:32 -0600 [thread overview]
Message-ID: <1314315824-9687-2-git-send-email-swarren@nvidia.com> (raw)
In-Reply-To: <1314315824-9687-1-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
The Tegra GPIO driver will be converted from static registration via
postcore_initcall() to be a platform device later in this patch series.
A new Tegra pinmux platform device will also be added.
Prepare for this by modifying all boards to register the appropriate
platform devices before-hand, so that when the drivers are converted,
those devices will be probed, and git bisectability will be maintained.
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/mach-tegra/board-harmony-pinmux.c | 8 ++++++++
arch/arm/mach-tegra/board-paz00-pinmux.c | 8 ++++++++
arch/arm/mach-tegra/board-seaboard-pinmux.c | 9 +++++++--
arch/arm/mach-tegra/board-trimslice-pinmux.c | 7 +++++++
arch/arm/mach-tegra/devices.c | 10 ++++++++++
arch/arm/mach-tegra/devices.h | 2 ++
6 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index 4d63e2e..e99b456 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-harmony.h"
+#include "devices.h"
static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
@@ -155,6 +161,8 @@ static struct tegra_gpio_table gpio_table[] = {
void harmony_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..43633f4 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-paz00.h"
+#include "devices.h"
static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
@@ -149,6 +155,8 @@ static struct tegra_gpio_table gpio_table[] = {
void paz00_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 74f78b7..f092298 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-seaboard.h"
+#include "devices.h"
#define DEFAULT_DRIVE(_name) \
{ \
@@ -157,8 +158,10 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-
-
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
@@ -173,6 +176,8 @@ static struct tegra_gpio_table gpio_table[] = {
void __init seaboard_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index bcb1916..4969dd2 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-trimslice.h"
+#include "devices.h"
static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -141,6 +142,11 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
@@ -151,6 +157,7 @@ static struct tegra_gpio_table gpio_table[] = {
void __init trimslice_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 57e35d2..48262bf 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -31,6 +31,16 @@
#include <mach/usb_phy.h>
#include "gpio-names.h"
+struct platform_device tegra_gpio_device = {
+ .name = "tegra-gpio",
+ .id = -1,
+};
+
+struct platform_device tegra_pinmux_device = {
+ .name = "tegra-pinmux",
+ .id = -1,
+};
+
static struct resource i2c_resource1[] = {
[0] = {
.start = INT_I2C,
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 4a7dc0a..873ecb2 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -21,6 +21,8 @@
#include <linux/platform_device.h>
+extern struct platform_device tegra_gpio_device;
+extern struct platform_device tegra_pinmux_device;
extern struct platform_device tegra_sdhci_device1;
extern struct platform_device tegra_sdhci_device2;
extern struct platform_device tegra_sdhci_device3;
--
1.7.0.4
next prev parent reply other threads:[~2011-08-25 23:43 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-25 23:43 [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT Stephen Warren
2011-08-25 23:43 ` [PATCH v3 04/13] docs/dt: Document nvidia,tegra20-pinmux binding Stephen Warren
2011-08-25 23:43 ` [PATCH v3 06/13] dt: add empty for_each_child_of_node, of_find_property Stephen Warren
[not found] ` <1314315824-9687-7-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-08-31 18:25 ` Stephen Warren
2011-08-25 23:43 ` [PATCH v3 08/13] gpio/tegra: Add device tree support Stephen Warren
[not found] ` <1314315824-9687-1-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-08-25 23:43 ` Stephen Warren [this message]
2011-08-25 23:43 ` [PATCH v3 02/13] docs/dt: Document nvidia, tegra20-gpio's nvidia, enabled-gpios property Stephen Warren
2011-08-25 23:43 ` [PATCH v3 03/13] arm/dt: Tegra: Add nvidia, enabled-gpios property to GPIO controller Stephen Warren
2011-08-25 23:43 ` [PATCH v3 05/13] arm/dt: Tegra: Add pinmux node Stephen Warren
2011-08-25 23:43 ` [PATCH v3 07/13] gpio/tegra: Convert to a platform device Stephen Warren
2011-08-25 23:43 ` [PATCH v3 09/13] arm/tegra: Convert pinmux driver " Stephen Warren
2011-08-25 23:43 ` [PATCH v3 10/13] of: add a generic pinmux helper Stephen Warren
[not found] ` <1314315824-9687-11-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-08-26 9:16 ` Jamie Iles
2011-08-29 11:09 ` Linus Walleij
[not found] ` <CACRpkdaTiWEtgjVOhUKeXhpiESvrWyz97p5j_PHe3MvEM4UaCw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-29 21:46 ` Stephen Warren
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF04B3279BEB-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-09-01 11:30 ` Linus Walleij
2011-08-25 23:43 ` [PATCH v3 11/13] of: add property iteration helpers Stephen Warren
[not found] ` <1314315824-9687-12-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-08-26 9:26 ` Jamie Iles
[not found] ` <20110826092632.GB3926-apL1N+EY0C9YtYNIL7UdTEEOCMrvLtNR@public.gmane.org>
2011-08-26 15:59 ` Stephen Warren
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF04B24A40C8-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-08-26 16:16 ` Jamie Iles
2011-08-25 23:43 ` [PATCH v3 12/13] arm/tegra: Add device tree support to pinmux driver Stephen Warren
2011-08-25 23:43 ` [PATCH v3 13/13] arm/tegra: board-dt: Remove dependency on non-dt pinmux functions Stephen Warren
2011-08-26 5:04 ` [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT Olof Johansson
[not found] ` <CAOesGMiygfaNkPa7uURCiJpC=WDinWhKi07LFgJ+5JoGW_fLKw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-26 16:07 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314315824-9687-2-git-send-email-swarren@nvidia.com \
--to=swarren-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=konkers-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=sshtylyov-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).