devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@ti.com>, Grant Likely <grant.likely@secretlab.ca>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
	devicetree-discuss@lists.ozlabs.org,
	Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/3] ASoC: Add device tree binding for WM8776
Date: Mon, 29 Aug 2011 14:27:50 +0100	[thread overview]
Message-ID: <1314624471-15381-2-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1314624471-15381-1-git-send-email-broonie@opensource.wolfsonmicro.com>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 Documentation/devicetree/bindings/sound/wm8776.txt |   18 ++++++++++++++++++
 sound/soc/codecs/wm8776.c                          |    9 +++++++++
 2 files changed, 27 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/wm8776.txt

diff --git a/Documentation/devicetree/bindings/sound/wm8776.txt b/Documentation/devicetree/bindings/sound/wm8776.txt
new file mode 100644
index 0000000..3b9ca49
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8776.txt
@@ -0,0 +1,18 @@
+WM8776 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8776"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8776@1a {
+	compatible = "wlf,wm8776";
+	reg = <0x1a>;
+};
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 367a990..0cfbfc1 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
@@ -452,6 +453,12 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8776 = {
 	.reg_cache_default = wm8776_reg,
 };
 
+static const struct of_device_id wm8776_of_match[] = {
+	{ .compatible = "wlf,wm8776", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, wm8776_of_match);
+
 #if defined(CONFIG_SPI_MASTER)
 static int __devinit wm8776_spi_probe(struct spi_device *spi)
 {
@@ -483,6 +490,7 @@ static struct spi_driver wm8776_spi_driver = {
 	.driver = {
 		.name	= "wm8776",
 		.owner	= THIS_MODULE,
+		.of_match_table = wm8776_of_match,
 	},
 	.probe		= wm8776_spi_probe,
 	.remove		= __devexit_p(wm8776_spi_remove),
@@ -527,6 +535,7 @@ static struct i2c_driver wm8776_i2c_driver = {
 	.driver = {
 		.name = "wm8776",
 		.owner = THIS_MODULE,
+		.of_match_table = wm8776_of_match,
 	},
 	.probe =    wm8776_i2c_probe,
 	.remove =   __devexit_p(wm8776_i2c_remove),
-- 
1.7.5.4

  reply	other threads:[~2011-08-29 13:27 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-29 13:27 [PATCH 1/3] ASoC: Add device tree binding for WM8770 Mark Brown
2011-08-29 13:27 ` Mark Brown [this message]
2011-08-29 13:27 ` [PATCH 3/3] ASoC: Add device tree binding for WM8804 Mark Brown
2011-08-30 15:48 ` [PATCH 1/3] ASoC: Add device tree binding for WM8770 Tabi Timur-B04825
     [not found]   ` <CAOZdJXUQpyvxOVgS9mPnMwJM1TNF-X+zOVkOsDqJM_oBNQih0Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-30 18:12     ` Mark Brown
2011-08-30 18:15       ` Timur Tabi
     [not found]         ` <4E5D28AB.7040206-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2011-08-30 18:18           ` Mark Brown
     [not found] ` <1314624471-15381-1-git-send-email-broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-08-30 16:13   ` Grant Likely
2011-08-31 10:30 ` Liam Girdwood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1314624471-15381-2-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=lrg@ti.com \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).