From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benoit Cousson Subject: [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board Date: Thu, 1 Sep 2011 19:25:12 +0200 Message-ID: <1314897912-18178-8-git-send-email-b-cousson@ti.com> References: <1314897912-18178-1-git-send-email-b-cousson@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1314897912-18178-1-git-send-email-b-cousson@ti.com> Sender: linux-omap-owner@vger.kernel.org To: grant.likely@secretlab.ca, tony@atomide.com Cc: linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org, manjugk@ti.com, Benoit Cousson List-Id: devicetree@vger.kernel.org In order to avoid conflict with the new board-omap3-dt.c file, remove the .dt_compat entry from the beagle regular board file. Any DT work for OMAP3 will have to be done on the generic DT board file to avoid breaking the legacy board support until DT migration is done. Based on orginal patch fropm Manju: http://www.spinics.net/lists/linux-omap/msg55832.html Signed-off-by: Benoit Cousson Signed-off-by: G, Manjunath Kondaiah Cc: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 13 ------------- 1 files changed, 0 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index a7923ca..2c358a2 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -388,9 +387,7 @@ static int __init omap3_beagle_i2c_init(void) /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); -#ifdef CONFIG_OF omap_register_i2c_bus(2, 100, NULL, 0); -#endif /* CONFIG_OF */ return 0; } @@ -528,10 +525,6 @@ static void __init beagle_opp_init(void) static void __init omap3_beagle_init(void) { -#ifdef CONFIG_OF - of_platform_prepare(NULL, NULL); -#endif /* CONFIG_OF */ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); omap3_beagle_i2c_init(); @@ -563,11 +556,6 @@ static void __init omap3_beagle_init(void) beagle_opp_init(); } -static const char *omap3_beagle_dt_match[] __initdata = { - "ti,omap3-beagle", - NULL -}; - MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ .boot_params = 0x80000100, @@ -577,5 +565,4 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .init_irq = omap3_beagle_init_irq, .init_machine = omap3_beagle_init, .timer = &omap3_secure_timer, - .dt_compat = omap3_beagle_dt_match, MACHINE_END -- 1.7.0.4