* [PATCH v3 0/2] Add device tree probe for i2c-imx driver
@ 2011-09-15 15:39 Shawn Guo
[not found] ` <1316101193-4295-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Shawn Guo @ 2011-09-15 15:39 UTC (permalink / raw)
To: Ben Dooks
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
patches-QSEj5FYQhm4dnm+yROfE0A
Hi Ben,
Hopefully, you can pick up this version.
Thanks.
Changes since v2:
* Drop HS-I2C from binding document fsl-imx-i2c.txt
Changes since v1:
* Fix a couple of typo in fsl-imx-i2c.txt
Shawn Guo (2):
i2c-imx: remove init/exit hooks from platform data
i2c-imx: add device tree probe support
.../devicetree/bindings/i2c/fsl-imx-i2c.txt | 18 ++++++++
arch/arm/plat-mxc/include/mach/i2c.h | 4 --
drivers/i2c/busses/i2c-imx.c | 46 +++++++++----------
3 files changed, 40 insertions(+), 28 deletions(-)
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v3 1/2] i2c-imx: remove init/exit hooks from platform data
[not found] ` <1316101193-4295-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
@ 2011-09-15 15:39 ` Shawn Guo
2011-09-15 15:39 ` [PATCH v3 2/2] i2c-imx: add device tree probe support Shawn Guo
2011-09-15 15:50 ` [PATCH v3 0/2] Add device tree probe for i2c-imx driver Ben Dooks
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2011-09-15 15:39 UTC (permalink / raw)
To: Ben Dooks
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
patches-QSEj5FYQhm4dnm+yROfE0A, Shawn Guo, Darius Augulis,
Ben Dooks
The init/exit hooks in platform data are being used nowhere, so can
be removed.
Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Acked-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/plat-mxc/include/mach/i2c.h | 4 ----
drivers/i2c/busses/i2c-imx.c | 21 +++------------------
2 files changed, 3 insertions(+), 22 deletions(-)
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
index 4a5dc5c..375cdd0 100644
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -11,14 +11,10 @@
/**
* struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @init: Initialise gpio's and other board specific things
- * @exit: Free everything initialised by @init
* @bitrate: Bus speed measured in Hz
*
**/
struct imxi2c_platform_data {
- int (*init)(struct device *dev);
- void (*exit)(struct device *dev);
int bitrate;
};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 4c2a62b..54d809e 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -466,7 +466,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx;
struct resource *res;
- struct imxi2c_platform_data *pdata;
+ struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
void __iomem *base;
resource_size_t res_size;
int irq;
@@ -485,19 +485,11 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
return -ENOENT;
}
- pdata = pdev->dev.platform_data;
-
- if (pdata && pdata->init) {
- ret = pdata->init(&pdev->dev);
- if (ret)
- return ret;
- }
-
res_size = resource_size(res);
if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
- ret = -EBUSY;
- goto fail0;
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ return -EBUSY;
}
base = ioremap(res->start, res_size);
@@ -586,9 +578,6 @@ fail2:
iounmap(base);
fail1:
release_mem_region(res->start, resource_size(res));
-fail0:
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
return ret; /* Return error number */
}
@@ -611,10 +600,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
writeb(0, i2c_imx->base + IMX_I2C_I2SR);
- /* Shut down hardware */
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
-
clk_put(i2c_imx->clk);
iounmap(i2c_imx->base);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v3 2/2] i2c-imx: add device tree probe support
[not found] ` <1316101193-4295-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-09-15 15:39 ` [PATCH v3 1/2] i2c-imx: remove init/exit hooks from platform data Shawn Guo
@ 2011-09-15 15:39 ` Shawn Guo
2011-09-15 15:50 ` [PATCH v3 0/2] Add device tree probe for i2c-imx driver Ben Dooks
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2011-09-15 15:39 UTC (permalink / raw)
To: Ben Dooks
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
patches-QSEj5FYQhm4dnm+yROfE0A, Shawn Guo, Grant Likely,
Darius Augulis, Ben Dooks
It adds device tree probe support for i2c-imx driver.
Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
---
.../devicetree/bindings/i2c/fsl-imx-i2c.txt | 18 ++++++++++++++
drivers/i2c/busses/i2c-imx.c | 25 +++++++++++++++----
2 files changed, 37 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
new file mode 100644
index 0000000..a5189e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -0,0 +1,18 @@
+* Freescale Inter IC (I2C) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-i2c"
+- reg : Should contain I2C registers location and length
+- interrupts : Should contain I2C interrupt
+
+Optional properties:
+- clock-frequency : Constains desired I2C bus clock frequency in Hz.
+ The absence of the propoerty indicates the default frequency 100 kHz.
+
+Examples:
+
+i2c@83fc4000 { /* I2C2 on i.MX51 */
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 54d809e..58832e5 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,9 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
@@ -125,6 +128,11 @@ struct imx_i2c_struct {
unsigned int ifdr; /* IMX_I2C_IFDR */
};
+static const struct of_device_id i2c_imx_dt_ids[] = {
+ { .compatible = "fsl,imx1-i2c", },
+ { /* sentinel */ }
+};
+
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
@@ -469,7 +477,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
void __iomem *base;
resource_size_t res_size;
- int irq;
+ int irq, bitrate;
int ret;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -512,6 +520,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.algo = &i2c_imx_algo;
i2c_imx->adapter.dev.parent = &pdev->dev;
i2c_imx->adapter.nr = pdev->id;
+ i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
i2c_imx->irq = irq;
i2c_imx->base = base;
i2c_imx->res = res;
@@ -538,10 +547,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
/* Set up clock divider */
- if (pdata && pdata->bitrate)
- i2c_imx_set_clk(i2c_imx, pdata->bitrate);
- else
- i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
+ bitrate = IMX_I2C_BIT_RATE;
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "clock-frequency", &bitrate);
+ if (ret < 0 && pdata && pdata->bitrate)
+ bitrate = pdata->bitrate;
+ i2c_imx_set_clk(i2c_imx, bitrate);
/* Set up chip registers to defaults */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
@@ -554,6 +565,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
goto fail5;
}
+ of_i2c_register_devices(&i2c_imx->adapter);
+
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
@@ -584,7 +597,6 @@ fail1:
static int __exit i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
- struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
/* remove adapter */
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
@@ -613,6 +625,7 @@ static struct platform_driver i2c_imx_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = i2c_imx_dt_ids,
}
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v3 0/2] Add device tree probe for i2c-imx driver
[not found] ` <1316101193-4295-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-09-15 15:39 ` [PATCH v3 1/2] i2c-imx: remove init/exit hooks from platform data Shawn Guo
2011-09-15 15:39 ` [PATCH v3 2/2] i2c-imx: add device tree probe support Shawn Guo
@ 2011-09-15 15:50 ` Ben Dooks
2 siblings, 0 replies; 4+ messages in thread
From: Ben Dooks @ 2011-09-15 15:50 UTC (permalink / raw)
To: Shawn Guo
Cc: Ben Dooks, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
patches-QSEj5FYQhm4dnm+yROfE0A
On Thu, Sep 15, 2011 at 11:39:51PM +0800, Shawn Guo wrote:
> Hi Ben,
>
> Hopefully, you can pick up this version.
ok, will do it for the weekend.
> Thanks.
>
> Changes since v2:
> * Drop HS-I2C from binding document fsl-imx-i2c.txt
>
> Changes since v1:
> * Fix a couple of typo in fsl-imx-i2c.txt
>
> Shawn Guo (2):
> i2c-imx: remove init/exit hooks from platform data
> i2c-imx: add device tree probe support
>
> .../devicetree/bindings/i2c/fsl-imx-i2c.txt | 18 ++++++++
> arch/arm/plat-mxc/include/mach/i2c.h | 4 --
> drivers/i2c/busses/i2c-imx.c | 46 +++++++++----------
> 3 files changed, 40 insertions(+), 28 deletions(-)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben Dooks, ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-09-15 15:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-15 15:39 [PATCH v3 0/2] Add device tree probe for i2c-imx driver Shawn Guo
[not found] ` <1316101193-4295-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-09-15 15:39 ` [PATCH v3 1/2] i2c-imx: remove init/exit hooks from platform data Shawn Guo
2011-09-15 15:39 ` [PATCH v3 2/2] i2c-imx: add device tree probe support Shawn Guo
2011-09-15 15:50 ` [PATCH v3 0/2] Add device tree probe for i2c-imx driver Ben Dooks
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).