devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: [PATCHv3 3/4] picoxcell: add the DTS for the PC7302 board
Date: Mon, 26 Sep 2011 16:24:48 +0100	[thread overview]
Message-ID: <1317050689-16417-4-git-send-email-jamie@jamieiles.com> (raw)
In-Reply-To: <1317050689-16417-1-git-send-email-jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>

The PC7302 board can be populated with either a PC3X2 or PC3X3 device.
Add DTS files for both variants of the PC7302.

v3:	- remove bootargs from dts files

Signed-off-by: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
---
 arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts |   86 ++++++++++++++++++++++++
 arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts |   92 ++++++++++++++++++++++++++
 2 files changed, 178 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
 create mode 100644 arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts

diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
new file mode 100644
index 0000000..1297414
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
@@ -0,0 +1,86 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X2)";
+	compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		linux,stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@1 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&pclk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
new file mode 100644
index 0000000..9e317a4
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
@@ -0,0 +1,92 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X3)";
+	compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		linux,stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@10 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+
+		clkgate: clkgate@800a0048 {
+			clock@4 {
+				picochip,clk-no-disable;
+			};
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&ebi_clk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};
-- 
1.7.4.1

  parent reply	other threads:[~2011-09-26 15:24 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-26 15:24 [PATCHv3 0/4] Initial support for Picochip picoXcell Jamie Iles
     [not found] ` <1317050689-16417-1-git-send-email-jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
2011-09-26 15:24   ` [PATCHv3 1/4] picoxcell: support for Picochip picoxcell devices Jamie Iles
2011-09-26 15:24   ` [PATCHv3 2/4] picoxcell: add the DTS for pc3x2 and pc3x3 devices Jamie Iles
     [not found]     ` <1317050689-16417-3-git-send-email-jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
2011-09-26 18:04       ` Rob Herring
     [not found]         ` <4E80BEA3.1030803-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-09-26 18:29           ` Jamie Iles
2011-09-26 15:24   ` Jamie Iles [this message]
2011-09-26 15:24   ` [PATCHv3 4/4] picoxcell: remove custom ioremap implementation Jamie Iles
2011-09-30 20:49 ` [PATCHv3 0/4] Initial support for Picochip picoXcell Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1317050689-16417-4-git-send-email-jamie@jamieiles.com \
    --to=jamie-wmlquqddiekakbo8gow8eq@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).