From: Thomas Abraham <thomas.abraham@linaro.org>
To: devicetree-discuss@lists.ozlabs.org, vinod.koul@intel.com
Cc: grant.likely@secretlab.ca, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, kgene.kim@samsung.com,
robherring2@gmail.com, patches@linaro.org,
jassisinghbrar@gmail.com, boojin.kim@samsung.com
Subject: [PATCH v7 09/10] ARM: S5PC100: Modify platform data for pl330 driver
Date: Wed, 12 Oct 2011 17:21:44 +0530 [thread overview]
Message-ID: <1318420304-27725-1-git-send-email-thomas.abraham@linaro.org> (raw)
In-Reply-To: <1318270538-30450-10-git-send-email-thomas.abraham@linaro.org>
With the 'struct dma_pl330_peri' removed, the platfrom data for dma
driver can be simplified to a simple list of peripheral request ids.
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Boojin Kim <boojin.kim@samsung.com>
---
arch/arm/mach-s5pc100/dma.c | 247 ++++++++++++-------------------------------
1 files changed, 69 insertions(+), 178 deletions(-)
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index 065a087..c841f4d 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -35,100 +35,42 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-struct dma_pl330_peri pdma0_peri[30] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_IRDA,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_AC97_MICIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMOUT,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_EXTERNAL,
- }, {
- .peri_id = (u8)DMACH_PWM,
- }, {
- .peri_id = (u8)DMACH_SPDIF,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_HSI_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_HSI_TX,
- .rqtype = MEMTODEV,
- },
+u8 pdma0_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_IRDA,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_EXTERNAL,
+ DMACH_PWM,
+ DMACH_SPDIF,
+ DMACH_HSI_RX,
+ DMACH_HSI_TX,
};
struct dma_pl330_platdata s5pc100_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri = pdma0_peri,
+ .peri_id = pdma0_peri,
};
struct amba_device s5pc100_device_pdma0 = {
@@ -147,98 +89,42 @@ struct amba_device s5pc100_device_pdma0 = {
.periphid = 0x00041330,
};
-struct dma_pl330_peri pdma1_peri[30] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_IRDA,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ0,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ1,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ2,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ3,
- },
+u8 pdma1_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_IRDA,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MSM_REQ0,
+ DMACH_MSM_REQ1,
+ DMACH_MSM_REQ2,
+ DMACH_MSM_REQ3,
};
struct dma_pl330_platdata s5pc100_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri = pdma1_peri,
+ .peri_id = pdma1_peri,
};
struct amba_device s5pc100_device_pdma1 = {
@@ -259,7 +145,12 @@ struct amba_device s5pc100_device_pdma1 = {
static int __init s5pc100_dma_init(void)
{
+ dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+
+ dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
return 0;
--
1.6.6.rc2
parent reply other threads:[~2011-10-12 11:51 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <1318270538-30450-10-git-send-email-thomas.abraham@linaro.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318420304-27725-1-git-send-email-thomas.abraham@linaro.org \
--to=thomas.abraham@linaro.org \
--cc=boojin.kim@samsung.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=jassisinghbrar@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
--cc=robherring2@gmail.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).