From: Rajendra Nayak <rnayak@ti.com>
To: broonie@opensource.wolfsonmicro.com, grant.likely@secretlab.ca
Cc: b-cousson@ti.com, patches@linaro.org, tony@atomide.com,
devicetree-discuss@lists.ozlabs.org,
Rajendra Nayak <rnayak@ti.com>,
linux-kernel@vger.kernel.org, shawn.guo@freescale.com,
linux-omap@vger.kernel.org, lrg@ti.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] Device tree support for regulators
Date: Thu, 27 Oct 2011 13:26:21 +0530 [thread overview]
Message-ID: <1319702185-16108-1-git-send-email-rnayak@ti.com> (raw)
Hi Mark, Grant,
v3 is based on the latest devicetree/next and is tested
(with twl adaptaions, which will be posted seperately)
on the OMAP4 panda and OMAP4 sdp boards.
The patches can be found here:
git://gitorious.org/omap-pm/linux.git for-dt/regulator
major changes in v3:
-1- Dropped "regulator: twl: Remove hardcoded board constraints from driver"
from the series.
-2- Added of_node as an additional paramter to regulator_register()
mainly done in new patch added,
"regulator: pass additional of_node to regulator_register()"
-3- Dropped some of the generic regulator bindings to be revisted later.
Thanks to Shawn Guo for bringing out the issue with the previous
series which did not handle cases of regulator drivers implemented
with one virtual device modeling all regulators.
regards,
Rajendra
Rajendra Nayak (4):
regulator: helper routine to extract regulator_init_data
regulator: adapt fixed regulator driver to dt
regulator: pass additional of_node to regulator_register()
regulator: map consumer regulator based on device tree
.../bindings/regulator/fixed-regulator.txt | 25 ++++++
.../devicetree/bindings/regulator/regulator.txt | 32 ++++++++
drivers/regulator/88pm8607.c | 2 +-
drivers/regulator/Kconfig | 7 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/aat2870-regulator.c | 2 +-
drivers/regulator/ab3100.c | 2 +-
drivers/regulator/ab8500.c | 2 +-
drivers/regulator/ad5398.c | 2 +-
drivers/regulator/bq24022.c | 2 +-
drivers/regulator/core.c | 82 ++++++++++++++++---
drivers/regulator/da903x.c | 2 +-
drivers/regulator/db8500-prcmu.c | 2 +-
drivers/regulator/dummy.c | 2 +-
drivers/regulator/fixed.c | 59 ++++++++++++++-
drivers/regulator/isl6271a-regulator.c | 2 +-
drivers/regulator/lp3971.c | 2 +-
drivers/regulator/lp3972.c | 2 +-
drivers/regulator/max1586.c | 2 +-
drivers/regulator/max8649.c | 2 +-
drivers/regulator/max8660.c | 2 +-
drivers/regulator/max8925-regulator.c | 2 +-
drivers/regulator/max8952.c | 2 +-
drivers/regulator/max8997.c | 2 +-
drivers/regulator/max8998.c | 2 +-
drivers/regulator/mc13783-regulator.c | 2 +-
drivers/regulator/mc13892-regulator.c | 2 +-
drivers/regulator/of_regulator.c | 66 ++++++++++++++++
drivers/regulator/pcap-regulator.c | 2 +-
drivers/regulator/pcf50633-regulator.c | 2 +-
drivers/regulator/tps6105x-regulator.c | 3 +-
drivers/regulator/tps65023-regulator.c | 2 +-
drivers/regulator/tps6507x-regulator.c | 2 +-
drivers/regulator/tps6524x-regulator.c | 2 +-
drivers/regulator/tps6586x-regulator.c | 2 +-
drivers/regulator/tps65910-regulator.c | 2 +-
drivers/regulator/tps65912-regulator.c | 2 +-
drivers/regulator/twl-regulator.c | 2 +-
drivers/regulator/wm831x-dcdc.c | 8 +-
drivers/regulator/wm831x-isink.c | 2 +-
drivers/regulator/wm831x-ldo.c | 6 +-
drivers/regulator/wm8350-regulator.c | 2 +-
drivers/regulator/wm8400-regulator.c | 2 +-
drivers/regulator/wm8994-regulator.c | 2 +-
include/linux/regulator/driver.h | 4 +-
include/linux/regulator/of_regulator.h | 20 +++++
sound/soc/codecs/sgtl5000.c | 2 +-
47 files changed, 325 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/fixed-regulator.txt
create mode 100644 Documentation/devicetree/bindings/regulator/regulator.txt
create mode 100644 drivers/regulator/of_regulator.c
create mode 100644 include/linux/regulator/of_regulator.h
next reply other threads:[~2011-10-27 7:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-27 7:56 Rajendra Nayak [this message]
[not found] ` <1319702185-16108-1-git-send-email-rnayak-l0cyMroinI0@public.gmane.org>
2011-10-27 7:56 ` [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data Rajendra Nayak
2011-10-27 8:09 ` Mark Brown
2011-10-27 10:43 ` Nayak, Rajendra
2011-10-27 11:49 ` Mark Brown
2011-10-27 13:27 ` Rajendra Nayak
2011-10-27 7:56 ` [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt Rajendra Nayak
[not found] ` <1319702185-16108-3-git-send-email-rnayak-l0cyMroinI0@public.gmane.org>
2011-10-27 12:18 ` Mark Brown
2011-11-04 20:34 ` Olof Johansson
2011-11-04 21:01 ` Mark Brown
2011-11-04 21:18 ` Olof Johansson
2011-11-04 21:25 ` Mark Brown
2011-11-04 21:47 ` Olof Johansson
2011-11-04 21:57 ` Mark Brown
2011-11-04 22:09 ` Olof Johansson
2011-11-04 22:23 ` Mark Brown
[not found] ` <20111104203422.GB3918-O5ziIzlqnXUVNXGz7ipsyg@public.gmane.org>
2011-11-07 6:27 ` Rajendra Nayak
2011-10-27 7:56 ` [PATCH v3 3/4] regulator: pass additional of_node to regulator_register() Rajendra Nayak
[not found] ` <1319702185-16108-4-git-send-email-rnayak-l0cyMroinI0@public.gmane.org>
2011-10-27 12:20 ` Mark Brown
2011-10-27 7:56 ` [PATCH v3 4/4] regulator: map consumer regulator based on device tree Rajendra Nayak
2011-10-27 12:20 ` Mark Brown
2011-10-27 9:08 ` [PATCH v3 0/4] Device tree support for regulators Mark Brown
2011-11-04 20:21 ` Olof Johansson
[not found] ` <CAOesGMii8v3DOCjWpuF3=+EVu+-HYGys=7RRgpk+9U=FxTHwOA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-11-04 21:02 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1319702185-16108-1-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=b-cousson@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=patches@linaro.org \
--cc=shawn.guo@freescale.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).