From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: "Samuel Ortiz" <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
"Sascha Hauer" <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Mark Brown"
<broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>,
"Uwe Kleine-König"
<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Liam Girdwood" <lrg-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 5/5] arm/imx: add mc13892 support into imx51-babbage.dts
Date: Mon, 28 Nov 2011 21:37:19 +0800 [thread overview]
Message-ID: <1322487439-27254-6-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1322487439-27254-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
It adds mc13892 support into imx51-babbage device tree source.
Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/boot/dts/imx51-babbage.dts | 100 ++++++++++++++++++++++++++++++++++-
1 files changed, 99 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index f8766af..97d832b 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -31,12 +31,14 @@
esdhc@70004000 { /* ESDHC1 */
fsl,cd-internal;
fsl,wp-internal;
+ vmmc-supply = <&vsd_reg>;
status = "okay";
};
esdhc@70008000 { /* ESDHC2 */
cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ vmmc-supply = <&vsd_reg>;
status = "okay";
};
@@ -58,7 +60,103 @@
spi-max-frequency = <6000000>;
reg = <0>;
mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
- fsl,mc13xxx-uses-regulator;
+
+ regulators {
+ sw1_reg: mc13892__sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: mc13892__sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: mc13892__sw3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: mc13892__sw4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ viohi_reg: mc13892__viohi {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: mc13892__vpll {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdig_reg: mc13892__vdig {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ };
+
+ vsd_reg: mc13892__vsd {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb2_reg: mc13892__vusb2 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vvideo_reg: mc13892__vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ };
+
+ vaudio_reg: mc13892__vaudio {
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcam_reg: mc13892__vcam {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen1_reg: mc13892__vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vgen2_reg: mc13892__vgen2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: mc13892__vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+
+ vusb_reg: mc13892__vusb {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
};
flash: at45db321d@1 {
--
1.7.4.1
prev parent reply other threads:[~2011-11-28 13:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-28 13:37 [PATCH 0/5] Add device tree support for mc13892 regulator driver Shawn Guo
[not found] ` <1322487439-27254-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-11-28 13:37 ` [PATCH 1/5] mfd: mc13xxx: add device tree probe support Shawn Guo
[not found] ` <1322487439-27254-2-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-11-29 8:23 ` Rajendra Nayak
[not found] ` <4ED49683.10609-l0cyMroinI0@public.gmane.org>
2011-11-30 8:12 ` Shawn Guo
2011-11-28 13:37 ` [PATCH 2/5] regulator: fix label names used in device tree bindings Shawn Guo
[not found] ` <1322487439-27254-3-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-11-28 19:02 ` Mark Brown
2011-11-29 8:25 ` Rajendra Nayak
2011-11-28 13:37 ` [PATCH 3/5] regulator: pass device_node to of_get_regulator_init_data() Shawn Guo
[not found] ` <1322487439-27254-4-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-11-28 13:34 ` Mark Brown
[not found] ` <20111128133425.GE8275-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-11-28 14:03 ` Shawn Guo
2011-11-28 13:37 ` [PATCH 4/5] regulator: mc13892: add device tree probe support Shawn Guo
[not found] ` <1322487439-27254-5-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-11-28 13:35 ` Mark Brown
[not found] ` <20111128133545.GF8275-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-11-28 14:08 ` Shawn Guo
2011-11-28 13:37 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322487439-27254-6-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=lrg-l0cyMroinI0@public.gmane.org \
--cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).