From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Subject: [PATCH 2/2] gpio/tegra: Make it a DT interrupt controller Date: Tue, 29 Nov 2011 18:32:23 -0700 Message-ID: <1322616743-31985-2-git-send-email-swarren@nvidia.com> References: <1322616743-31985-1-git-send-email-swarren@nvidia.com> Return-path: In-Reply-To: <1322616743-31985-1-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Olof Johansson , Colin Cross Cc: Peter De Schrijver , Rob Herring , Grant Likely , devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Stephen Warren List-Id: devicetree@vger.kernel.org Fix the DT binding documentation to describe interrupt-related properties, and the contents of "child" node interrupts property. Update tegra20.dtsi to specify the required interrupt-related properties. Fix the driver to creating an IRQ domain for itself, so that child node interrupts properties are correctly parsed. Signed-off-by: Stephen Warren --- This patch depends on "arm/tegra: convert tegra20 to GIC devicetree binding", at least for context, and probably functionally (and of course patch 1 in this series). I've tested that this patch causes the WM8903 to receive a valid IRQ when instantiated from device-tree (although the patches to instantiate the WM8903 from DT are local to me for now). .../devicetree/bindings/gpio/gpio_nvidia.txt | 10 ++++++++++ arch/arm/boot/dts/tegra20.dtsi | 2 ++ drivers/gpio/gpio-tegra.c | 4 ++++ 3 files changed, 16 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt index eb4b530..ecdf19c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt @@ -6,3 +6,13 @@ Required properties: second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) - gpio-controller : Marks the device node as a GPIO controller. +- #interrupt-cells : Should be 3. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. +- interrupt-controller : Marks the device node as an interrupt controller. diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index db6f562..e25f4a6 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -79,6 +79,8 @@ 0 55 0x04 0 87 0x04 0 89 0x04 >; + interrupt-controller; + #interrupt-cells = <2>; #gpio-cells = <2>; gpio-controller; }; diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 61044c8..26b0c85 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -25,6 +25,7 @@ #include #include #include +#include #include @@ -410,6 +411,9 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) spin_lock_init(&bank->lvl_lock[j]); } + if (pdev->dev.of_node) + irq_domain_add_simple(pdev->dev.of_node, TEGRA_GPIO_TO_IRQ(0)); + return 0; } -- 1.7.0.4