From: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Peter De Schrijver
<pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Cc: Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Randy Dunlap <rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Gary King <gking-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v6 09/10] arm/tegra: implement support for tegra30
Date: Thu, 8 Dec 2011 14:43:52 +0200 [thread overview]
Message-ID: <1323348254-29072-10-git-send-email-pdeschrijver@nvidia.com> (raw)
In-Reply-To: <1323348254-29072-1-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Add support for tegra30 SoC. This includes a device tree compatible type for
this SoC ("nvidia,tegra30") and adds L2 cache initialization for this new SoC.
The clock framework is still missing, which prevents most drivers from working.
The basic IRQs are the same, so remove the dependency on
CONFIG_ARCH_TEGRA_2x_SOC.
Signed-off-by: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/mach-tegra/Kconfig | 18 +++++++++++++-----
arch/arm/mach-tegra/board-dt.c | 17 +++++++++++++++++
arch/arm/mach-tegra/board.h | 1 +
arch/arm/mach-tegra/common.c | 6 ++++++
arch/arm/mach-tegra/include/mach/irqs.h | 2 --
5 files changed, 37 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 2b1d49b..aad54ca 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -2,11 +2,8 @@ if ARCH_TEGRA
comment "NVIDIA Tegra options"
-choice
- prompt "Select Tegra processor family for target system"
-
config ARCH_TEGRA_2x_SOC
- bool "Tegra 2 family"
+ bool "Enable support for Tegra20 family"
select CPU_V7
select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
@@ -17,7 +14,18 @@ config ARCH_TEGRA_2x_SOC
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-endchoice
+config ARCH_TEGRA_3x_SOC
+ bool "Enable support for Tegra30 family"
+ select CPU_V7
+ select ARM_GIC
+ select ARCH_REQUIRE_GPIOLIB
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
+ select USB_ULPI if USB_SUPPORT
+ select USB_ULPI_VIEWPORT if USB_SUPPORT
+ select USE_OF
+ help
+ Support for NVIDIA Tegra T30 processor family, based on the
+ ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
config TEGRA_PCI
bool "PCI Express support"
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index ef9843c..d1ed473 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -154,3 +154,20 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
.dt_compat = tegra20_dt_board_compat,
MACHINE_END
#endif
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+static const char *tegra30_dt_board_compat[] = {
+ NULL
+};
+
+DT_MACHINE_START(TEGRA30_DT, "nVidia Tegra30 (Flattened Device Tree)")
+ .map_io = tegra_map_common_io,
+ .init_early = tegra30_init_early,
+ .init_irq = tegra_dt_init_irq,
+ .handle_irq = gic_handle_irq,
+ .timer = &tegra_timer,
+ .init_machine = tegra_dt_init,
+ .restart = tegra_assert_system_reset,
+ .dt_compat = tegra30_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index c268cfa..cfe1de1 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -26,6 +26,7 @@
void tegra_assert_system_reset(char mode, const char *cmd);
void __init tegra20_init_early(void);
+void __init tegra30_init_early(void);
void __init tegra_map_common_io(void);
void __init tegra_init_irq(void);
void __init tegra_init_clock(void);
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 5b711ad..31c99f3 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -87,3 +87,9 @@ void __init tegra20_init_early(void)
tegra_init_cache(0x331, 0x441);
}
#endif
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+void __init tegra30_init_early(void)
+{
+ tegra_init_cache(0x441, 0x551);
+}
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h
index 73265af..a2146cd 100644
--- a/arch/arm/mach-tegra/include/mach/irqs.h
+++ b/arch/arm/mach-tegra/include/mach/irqs.h
@@ -25,7 +25,6 @@
#define IRQ_LOCALTIMER 29
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
/* Primary Interrupt Controller */
#define INT_PRI_BASE (INT_GIC_BASE + 32)
#define INT_TMR1 (INT_PRI_BASE + 0)
@@ -178,6 +177,5 @@
#define NR_BOARD_IRQS 32
#define NR_IRQS (INT_BOARD_BASE + NR_BOARD_IRQS)
-#endif
#endif
--
1.7.7.rc0.72.g4b5ea.dirty
next prev parent reply other threads:[~2011-12-08 12:43 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-08 12:43 [PATCH v6 00/10] Add support for tegra30 and cardhu Peter De Schrijver
2011-12-08 12:43 ` [PATCH v6 01/10] arm/tegra: initial device tree for tegra30 Peter De Schrijver
2011-12-09 14:22 ` Rob Herring
2011-12-08 12:43 ` [PATCH v6 03/10] arm/tegra: prepare clock code for multiple tegra variants Peter De Schrijver
[not found] ` <1323348254-29072-4-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-12-08 18:25 ` Colin Cross
2011-12-09 9:13 ` Peter De Schrijver
2011-12-09 18:32 ` Colin Cross
2011-12-13 11:21 ` Peter De Schrijver
2011-12-08 12:43 ` [PATCH v6 04/10] arm/tegra: prepare early init " Peter De Schrijver
[not found] ` <1323348254-29072-5-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-12-08 17:57 ` Stephen Warren
[not found] ` <74CDBE0F657A3D45AFBB94109FB122FF1750B77A7E-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-12-08 18:29 ` Colin Cross
2011-12-09 11:19 ` Peter De Schrijver
2011-12-09 18:35 ` Colin Cross
2011-12-13 11:18 ` Peter De Schrijver
2011-12-12 0:17 ` Olof Johansson
2011-12-08 12:43 ` [PATCH v6 05/10] arm/tegra: rename tegra20 pinmux files Peter De Schrijver
2011-12-08 12:43 ` [PATCH v6 06/10] arm/tegra: prepare pinmux code for multiple tegra variants Peter De Schrijver
2011-12-08 12:43 ` [PATCH v6 07/10] arm/tegra: add new fields to struct tegra_pingroup_desc Peter De Schrijver
2011-12-08 12:43 ` [PATCH v6 08/10] arm/tegra: pinmux tables and definitions for tegra30 Peter De Schrijver
[not found] ` <1323348254-29072-1-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-12-08 12:43 ` [PATCH v6 02/10] arm/tegra: cleanup tegra20 support Peter De Schrijver
2011-12-08 12:43 ` Peter De Schrijver [this message]
2011-12-08 12:43 ` [PATCH v6 10/10] arm/tegra: add support for tegra30 based board cardhu Peter De Schrijver
[not found] ` <1323348254-29072-11-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2011-12-08 18:03 ` Stephen Warren
2011-12-09 14:29 ` Rob Herring
[not found] ` <4EE21B67.5040006-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-12-09 15:52 ` Peter De Schrijver
2011-12-12 0:26 ` Olof Johansson
2011-12-08 18:08 ` [PATCH v6 00/10] Add support for tegra30 and cardhu Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323348254-29072-10-git-send-email-pdeschrijver@nvidia.com \
--to=pdeschrijver-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=gking-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).