From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajendra Nayak Subject: [PATCH v3 0/4] OMAP serial device tree support Date: Wed, 14 Dec 2011 17:25:42 +0530 Message-ID: <1323863746-18145-1-git-send-email-rnayak@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-serial-owner@vger.kernel.org To: linux-serial@vger.kernel.org, linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, khilman@ti.com Cc: tony@atomide.com, govindraj.raja@ti.com, b-cousson@ti.com, linux-arm-kernel@lists.infradead.org, linaro-dev@lists.linaro.org, patches@linaro.org, robherring2@gmail.com, Rajendra Nayak List-Id: devicetree@vger.kernel.org v3 is rebased on top of the latest serial runtime patches[1] and boot tested with/without DT on OMAP4 SDP and OMAP4 Panda boards. Patches can be found here.. git://gitorious.org/omap-pm/linux.git for-dt/serial I also had to pull in a fix[2] for DT testing (already in linux-omap master) which was missing as the serial runtime branch[1] was based on an older master commit. Changes in v3: -1- Rebased on latest serial runtime patches -2- Minor typr fixes Changes in v2: -1- Got rid of binding to define which uart is console -2- Added checks to default clock speed to 48Mhz -3- Added compatible for each OMAP family -4- Used of_alias_get_id to populate port.line [1] git://gitorious.org/runtime_3-0/runtime_3-0.git for_3_3/lo_rc4_uartruntime [2] http://www.spinics.net/lists/arm-kernel/msg150751.html Rajendra Nayak (4): omap-serial: Get rid of all pdev->id usage omap-serial: Use default clock speed (48Mhz) if not specified omap-serial: Add minimal device tree support ARM: omap: pass minimal SoC/board data for UART from dt .../devicetree/bindings/serial/omap_serial.txt | 10 +++ arch/arm/boot/dts/omap3.dtsi | 31 ++++++++ arch/arm/boot/dts/omap4.dtsi | 28 +++++++ arch/arm/mach-omap2/board-generic.c | 1 - drivers/tty/serial/omap-serial.c | 80 +++++++++++++++---- 5 files changed, 132 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt