devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: "Samuel Ortiz" <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
	"Sascha Hauer" <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	"Mark Brown"
	<broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>,
	"Uwe Kleine-König"
	<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	"Liam Girdwood" <lrg-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 4/4] arm/imx: add mc13892 support into imx51-babbage.dts
Date: Wed, 21 Dec 2011 23:00:47 +0800	[thread overview]
Message-ID: <1324479647-4580-5-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1324479647-4580-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

It adds mc13892 support into imx51-babbage device tree source.

Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 arch/arm/boot/dts/imx51-babbage.dts |   93 ++++++++++++++++++++++++++++++++++-
 1 files changed, 91 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 564cb8c..728c9e8 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -31,12 +31,14 @@
 				esdhc@70004000 { /* ESDHC1 */
 					fsl,cd-internal;
 					fsl,wp-internal;
+					vmmc-supply = <&vsd_reg>;
 					status = "okay";
 				};
 
 				esdhc@70008000 { /* ESDHC2 */
 					cd-gpios = <&gpio1 6 0>;
 					wp-gpios = <&gpio1 5 0>;
+					vmmc-supply = <&vsd_reg>;
 					status = "okay";
 				};
 
@@ -56,8 +58,95 @@
 						compatible = "fsl,mc13892";
 						spi-max-frequency = <6000000>;
 						reg = <0>;
-						mc13xxx-irq-gpios = <&gpio1 8 0>;
-						fsl,mc13xxx-uses-regulator;
+						interrupt-parent = <&gpio1>;
+						interrupts = <8>;
+
+						regulators {
+							sw1_reg: sw1 {
+								regulator-min-microvolt = <600000>;
+								regulator-max-microvolt = <1375000>;
+								regulator-boot-on;
+								regulator-always-on;
+							};
+
+							sw2_reg: sw2 {
+								regulator-min-microvolt = <900000>;
+								regulator-max-microvolt = <1850000>;
+								regulator-boot-on;
+								regulator-always-on;
+							};
+
+							sw3_reg: sw3 {
+								regulator-min-microvolt = <1100000>;
+								regulator-max-microvolt = <1850000>;
+								regulator-boot-on;
+								regulator-always-on;
+							};
+
+							sw4_reg: sw4 {
+								regulator-min-microvolt = <1100000>;
+								regulator-max-microvolt = <1850000>;
+								regulator-boot-on;
+								regulator-always-on;
+							};
+
+							vpll_reg: vpll {
+								regulator-min-microvolt = <1050000>;
+								regulator-max-microvolt = <1800000>;
+								regulator-boot-on;
+								regulator-always-on;
+							};
+
+							vdig_reg: vdig {
+								regulator-min-microvolt = <1650000>;
+								regulator-max-microvolt = <1650000>;
+								regulator-boot-on;
+							};
+
+							vsd_reg: vsd {
+								regulator-min-microvolt = <1800000>;
+								regulator-max-microvolt = <3150000>;
+							};
+
+							vusb2_reg: vusb2 {
+								regulator-min-microvolt = <2400000>;
+								regulator-max-microvolt = <2775000>;
+								regulator-boot-on;
+								regulator-always-on;
+							};
+
+							vvideo_reg: vvideo {
+								regulator-min-microvolt = <2775000>;
+								regulator-max-microvolt = <2775000>;
+							};
+
+							vaudio_reg: vaudio {
+								regulator-min-microvolt = <2300000>;
+								regulator-max-microvolt = <3000000>;
+							};
+
+							vcam_reg: vcam {
+								regulator-min-microvolt = <2500000>;
+								regulator-max-microvolt = <3000000>;
+							};
+
+							vgen1_reg: vgen1 {
+								regulator-min-microvolt = <1200000>;
+								regulator-max-microvolt = <1200000>;
+							};
+
+							vgen2_reg: vgen2 {
+								regulator-min-microvolt = <1200000>;
+								regulator-max-microvolt = <3150000>;
+								regulator-always-on;
+							};
+
+							vgen3_reg: vgen3 {
+								regulator-min-microvolt = <1800000>;
+								regulator-max-microvolt = <2900000>;
+								regulator-always-on;
+							};
+						};
 					};
 
 					flash: at45db321d@1 {
-- 
1.7.4.1

  parent reply	other threads:[~2011-12-21 15:00 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-21 15:00 [PATCH v4 0/4] Add device tree support for mc13892 regulator driver Shawn Guo
     [not found] ` <1324479647-4580-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-12-21 15:00   ` [PATCH 1/4] mfd: improve mc13xxx dt binding document Shawn Guo
     [not found]     ` <1324479647-4580-2-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-12-22 11:05       ` Mark Brown
2011-12-22 16:07       ` Samuel Ortiz
2011-12-21 15:00   ` [PATCH 2/4] regulator: mc13892: remove the unnecessary prefix from regulator name Shawn Guo
2011-12-22 11:08     ` Mark Brown
     [not found]       ` <20111222110830.GI4546-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-22 11:43         ` Shawn Guo
2011-12-21 15:00   ` [PATCH 3/4] regulator: mc13892: add device tree probe support Shawn Guo
     [not found]     ` <1324479647-4580-4-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-12-22 11:08       ` Mark Brown
2011-12-21 15:00   ` Shawn Guo [this message]
2011-12-30  3:28     ` [PATCH 4/4] arm/imx: add mc13892 support into imx51-babbage.dts Richard Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1324479647-4580-5-git-send-email-shawn.guo@linaro.org \
    --to=shawn.guo-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
    --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=lrg-l0cyMroinI0@public.gmane.org \
    --cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).