From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajendra Nayak Subject: [PATCH v2 0/4] omap hsmmc device tree support Date: Thu, 23 Feb 2012 17:31:26 +0530 Message-ID: <1329998490-27555-1-git-send-email-rnayak@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-mmc-owner@vger.kernel.org To: linux-mmc@vger.kernel.org, cjb@laptop.org, devicetree-discuss@lists.ozlabs.org Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, balajitk@ti.com, svenkatr@ti.com, linaro-dev@lists.linaro.org, Rajendra Nayak List-Id: devicetree@vger.kernel.org This series adds device tree support for OMAP hsmmc driver. The series is dependent on a couple other series, to add TWL regulator DT support[1] and another to clean the pdev->id usage within the hsmmc driver[2] all patches including the dependent series can be found here git://gitorious.org/omap-pm/linux.git for-dt/regulator The series is tested on omap4sdp (both external and emmc), omap4panda amd omap3beagle boards. Things to do: -1- Card detect isn't functional and needs twl4030 gpio to be DT converted. -2- pbias cell programming is missing and needs an OMAP control module driver. [1] http://marc.info/?l=linux-omap&m=132999699905180&w=2 [2] http://marc.info/?l=linux-omap&m=132999646604985&w=2 Rajendra Nayak (4): mmc: omap_hsmmc: Convert hsmmc driver to use device tree mmc: omap_hsmmc: Avoid a regulator voltage change with dt arm/dts: OMAP4: Add mmc controller nodes and board data arm/dts: OMAP3: Add mmc controller nodes and board data .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 31 +++++++ arch/arm/boot/dts/omap3-beagle.dts | 6 ++ arch/arm/boot/dts/omap3.dtsi | 26 ++++++ arch/arm/boot/dts/omap4-panda.dts | 10 +++ arch/arm/boot/dts/omap4-sdp.dts | 16 ++++ arch/arm/boot/dts/omap4.dtsi | 31 +++++++ drivers/mmc/host/omap_hsmmc.c | 83 +++++++++++++++++++- 7 files changed, 202 insertions(+), 1 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt