devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org>
To: linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
	balajitk-l0cyMroinI0@public.gmane.org,
	Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree
Date: Thu, 23 Feb 2012 17:31:27 +0530	[thread overview]
Message-ID: <1329998490-27555-2-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1329998490-27555-1-git-send-email-rnayak-l0cyMroinI0@public.gmane.org>

Define dt bindings for the ti-omap-hsmmc, and adapt
the driver to extract data (which was earlier passed as
platform_data) from device tree.

Signed-off-by: Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org>
---
 .../devicetree/bindings/mmc/ti-omap-hsmmc.txt      |   31 +++++++++
 drivers/mmc/host/omap_hsmmc.c                      |   68 ++++++++++++++++++++
 2 files changed, 99 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt

diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
new file mode 100644
index 0000000..e4fa8f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -0,0 +1,31 @@
+* TI Highspeed MMC host controller for OMAP
+
+The Highspeed MMC Host Controller on TI OMAP family
+provides an interface for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+- compatible:
+ Should be "ti,omap2-hsmmc", for OMAP2/3 controllers
+ Should be "ti,omap4-hsmmc", for OMAP4 controllers
+- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
+- reg : should contain hsmmc registers location and length
+
+Optional properties:
+ti,dual-volt: boolean, supports dual voltage cards
+<supply-name>-supply: phandle to the regulator device tree node
+"supply-name" examples are "vmmc", "vmmc_aux" etc
+ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
+cd-gpios: GPIOs for card detection
+wp-gpios: GPIOs for write protection
+ti,non-removable: non-removable slot (like eMMC)
+
+Example:
+	mmc1: mmc@0x4809c000 {
+		compatible = "ti,omap4-hsmmc";
+		reg = <0x4809c000 0x400>;
+		ti,hwmods = "mmc1";
+		ti,dual-volt;
+		ti,bus-width = <4>;
+		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+		ti,non-removable;
+	};
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 35f6dc1..0c93d58 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -26,6 +26,9 @@
 #include <linux/platform_device.h>
 #include <linux/timer.h>
 #include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/core.h>
 #include <linux/mmc/mmc.h>
@@ -1718,6 +1721,46 @@ static void omap_hsmmc_debugfs(struct mmc_host *mmc)
 
 #endif
 
+#ifdef CONFIG_OF
+static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata;
+	struct device_node *np = dev->of_node;
+	u32 bus_width;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL; /* out of memory */
+
+	if (of_find_property(np, "ti,dual-volt", NULL))
+		pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
+
+	/* This driver only supports 1 slot */
+	pdata->nr_slots = 1;
+	pdata->slots[0].switch_pin = of_get_named_gpio(np, "cd-gpios", 0);
+	pdata->slots[0].gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
+
+	if (of_find_property(np, "ti,non-removable", NULL)) {
+		pdata->slots[0].nonremovable = true;
+		pdata->slots[0].no_regulator_off_init = true;
+	}
+	of_property_read_u32(np, "ti,bus-width", &bus_width);
+	if (bus_width == 4)
+		pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA;
+	else if (bus_width == 8)
+		pdata->slots[0].caps |= MMC_CAP_8_BIT_DATA;
+	return pdata;
+}
+#else
+static inline struct omap_mmc_platform_data
+			*of_get_hsmmc_pdata(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static const struct of_device_id omap_mmc_of_match[];
+
 static int __init omap_hsmmc_probe(struct platform_device *pdev)
 {
 	struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
@@ -1725,6 +1768,14 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
 	struct omap_hsmmc_host *host = NULL;
 	struct resource *res;
 	int ret, irq;
+	const struct of_device_id *match;
+
+	match = of_match_device(omap_mmc_of_match, &pdev->dev);
+	if (match) {
+		pdata = of_get_hsmmc_pdata(&pdev->dev);
+		if (match->data)
+			pdata->reg_offset = *(u16 *)match->data;
+	}
 
 	if (pdata == NULL) {
 		dev_err(&pdev->dev, "Platform Data is missing\n");
@@ -2120,12 +2171,29 @@ static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
 	.runtime_resume = omap_hsmmc_runtime_resume,
 };
 
+#if defined(CONFIG_OF)
+static u16 omap4_reg_offset = 0x100;
+
+static const struct of_device_id omap_mmc_of_match[] = {
+	{
+		.compatible = "ti,omap2-hsmmc",
+	},
+	{
+		.compatible = "ti,omap4-hsmmc",
+		.data = &omap4_reg_offset,
+	},
+	{},
+}
+MODULE_DEVICE_TABLE(of, omap_mmc_of_match);
+#endif
+
 static struct platform_driver omap_hsmmc_driver = {
 	.remove		= omap_hsmmc_remove,
 	.driver		= {
 		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,
 		.pm = &omap_hsmmc_dev_pm_ops,
+		.of_match_table = of_match_ptr(omap_mmc_of_match),
 	},
 };
 
-- 
1.7.1

  parent reply	other threads:[~2012-02-23 12:01 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-23 12:01 [PATCH v2 0/4] omap hsmmc device tree support Rajendra Nayak
     [not found] ` <1329998490-27555-1-git-send-email-rnayak-l0cyMroinI0@public.gmane.org>
2012-02-23 12:01   ` Rajendra Nayak [this message]
     [not found]     ` <1329998490-27555-2-git-send-email-rnayak-l0cyMroinI0@public.gmane.org>
2012-02-24 11:32       ` [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree T Krishnamoorthy, Balaji
2012-02-24 11:35         ` Rajendra Nayak
     [not found]           ` <4F4775FF.2090500-l0cyMroinI0@public.gmane.org>
2012-02-24 12:51             ` Cousson, Benoit
2012-02-24 12:58               ` Rajendra Nayak
     [not found]                 ` <4F478963.20009-l0cyMroinI0@public.gmane.org>
2012-02-24 13:02                   ` Cousson, Benoit
2012-02-24 13:04                     ` Rajendra Nayak
2012-03-08  3:46     ` Rajendra Nayak
2012-03-08 15:58       ` Rob Herring
2012-03-09  5:42     ` Grant Likely
2012-03-09  9:21       ` Rajendra Nayak
2012-02-23 12:01   ` [PATCH v2 2/4] mmc: omap_hsmmc: Avoid a regulator voltage change with dt Rajendra Nayak
2012-02-23 12:01   ` [PATCH v2 3/4] arm/dts: OMAP4: Add mmc controller nodes and board data Rajendra Nayak
2012-02-24 10:16     ` T Krishnamoorthy, Balaji
2012-02-24 10:26       ` Rajendra Nayak
     [not found]         ` <4F4765EC.1000102-l0cyMroinI0@public.gmane.org>
2012-02-24 10:37           ` Russell King - ARM Linux
2012-02-24 10:59         ` T Krishnamoorthy, Balaji
2012-03-09 15:49         ` Grant Likely
2012-02-23 12:01   ` [PATCH v2 4/4] arm/dts: OMAP3: " Rajendra Nayak
2012-02-23 18:57     ` Tony Lindgren
2012-02-24  4:00       ` Rajendra Nayak
     [not found]         ` <4F470B71.1020308-l0cyMroinI0@public.gmane.org>
2012-02-24 11:23           ` Cousson, Benoit
2012-02-24 18:49         ` Tony Lindgren
2012-03-09  5:46           ` Grant Likely
2012-03-09  6:51             ` Paul Walmsley
2012-03-09  9:36               ` Rajendra Nayak
2012-03-09  9:26             ` Rajendra Nayak
2012-02-23 12:13 ` [PATCH v2 0/4] omap hsmmc device tree support Rajendra Nayak
  -- strict thread matches above, loose matches on Subject: below --
2012-03-12 15:02 Rajendra Nayak
2012-03-12 15:02 ` [PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1329998490-27555-2-git-send-email-rnayak@ti.com \
    --to=rnayak-l0cymroini0@public.gmane.org \
    --cc=balajitk-l0cyMroinI0@public.gmane.org \
    --cc=cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).