[PATCH 0/2] gpio/MIPS/OCTEON: Add GPIO support for OCTEON.

[David Daney <ddaney.cavm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

From: David Daney <david.daney-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>

There are two patches needed to add OCTEON GPIO support:

1) Select ARCH_REQUIRE_GPIOLIB.  This allows standard I2C GPIO
expanders to function, as well as being a prerequisite for the driver
for the on-chip pins.

2) The on-chip pin driver.

I'm not sure the best way to merge these, they are part MIPS and part
GPIO.  Via either maintainer is fine by me.

Thanks,


David Daney (2):
  MIPS: OCTEON: Select ARCH_REQUIRE_GPIOLIB
  gpio/MIPS/OCTEON: Add a driver for OCTEON's on-chip GPIO pins.

 arch/mips/Kconfig                               |    1 +
 arch/mips/include/asm/mach-cavium-octeon/gpio.h |   21 +++
 drivers/gpio/Kconfig                            |    8 +
 drivers/gpio/Makefile                           |    1 +
 drivers/gpio/gpio-octeon.c                      |  166 +++++++++++++++++++++++
 5 files changed, 197 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/gpio.h
 create mode 100644 drivers/gpio/gpio-octeon.c

-- 
1.7.2.3