[PATCH V2 2/2] arm/dts: OMAP2: Fix interrupt controller binding

[Jon Hunter <jon-hunter@ti.com>]

When booting with device-tree on an OMAP2420 SDP, the kernel is hanging when
initialising the interrupts and following kernel dumps is seen ...

[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/arm/mach-omap2/irq.c:271 omap_intc_of_init+0x50/0xb4()
[    0.000000] unable to get intc registers
[    0.000000] Modules linked in:
[    0.000000] [<c001befc>] (unwind_backtrace+0x0/0xf4) from [<c0040c34>] (warn_slowpath_common+0x4c/0x64)
[    0.000000] [<c0040c34>] (warn_slowpath_common+0x4c/0x64) from [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40)
[    0.000000] [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) from [<c066b8a4>] (omap_intc_of_init+0x50/0xb4)
[    0.000000] [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) from [<c0688b70>] (of_irq_init+0x144/0x288)
[    0.000000] [<c0688b70>] (of_irq_init+0x144/0x288) from [<c0663294>] (init_IRQ+0x14/0x1c)
[    0.000000] [<c0663294>] (init_IRQ+0x14/0x1c) from [<c06607fc>] (start_kernel+0x198/0x304)
[    0.000000] [<c06607fc>] (start_kernel+0x198/0x304) from [<80008044>] (0x80008044)
[    0.000000] ---[ end trace 1b75b31a2719ed1c ]---
[    0.000000] of_irq_init: children remain, but no parents

The OMAP2 interrupt controller binding is missing the number of interrupts and
interrupt controller register address. Adding these fixes the problem.

This is based upon latest linux-omap master (3.5-rc1) git tree.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/boot/dts/omap2.dtsi |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f2ab4ea..581cb08 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -44,6 +44,8 @@
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			ti,intc-size = <96>;
+			reg = <0x480FE000 0x1000>;
 		};
 
 		uart1: serial@4806a000 {
-- 
1.7.9.5