devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>,
	Alessandro Zummo <a.zummo@towertech.it>,
	rtc-linux@googlegroups.com, devicetree-discuss@lists.ozlabs.org,
	Rob Herring <rob.herring@calxeda.com>,
	Grant Likely <grant.likely@secretlab.ca>,
	Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc
Date: Fri,  8 Jun 2012 20:56:44 +0200	[thread overview]
Message-ID: <1339181804-22822-1-git-send-email-marex@denx.de> (raw)

Add simple binding for the stmp3xxx-rtc.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: rtc-linux@googlegroups.com
Cc: Shawn Guo <shawn.guo@linaro.org>
---
 .../devicetree/bindings/rtc/stmp3xxx-rtc.txt        |   19 +++++++++++++++++++
 arch/arm/boot/dts/imx28.dtsi                        |    1 +
 drivers/rtc/rtc-stmp3xxx.c                          |    7 +++++++
 3 files changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt

V2: Fix typos, remove fsl,imx28-rtc

diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
new file mode 100644
index 0000000..a7a7de5
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
@@ -0,0 +1,19 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+    * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: Two interrupt numbers to the cpu should be specified. First
+  interrupt number is the rtc tick interrupt and second interrupt number
+  is the rtc alarm interrupt. The number of cells representing a interrupt
+  depends on the parent interrupt controller.
+
+Example:
+
+	rtc@80056000 {
+		compatible = "fsl,stmp3xxx-rtc";
+		reg = <0x80056000 2000>;
+		interrupts = <28 29>;
+	};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index cabcce8..5053019 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -387,6 +387,7 @@
 			};
 
 			rtc@80056000 {
+				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 				reg = <0x80056000 2000>;
 				interrupts = <28 29>;
 				status = "disabled";
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index 1028786..3aadb58 100644
--- a/drivers/rtc/rtc-stmp3xxx.c
+++ b/drivers/rtc/rtc-stmp3xxx.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
+#include <linux/of_device.h>
 
 #include <mach/common.h>
 
@@ -265,6 +266,11 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
 #define stmp3xxx_rtc_resume	NULL
 #endif
 
+static const struct of_device_id rtc_dt_ids[] = {
+	{ .compatible = "fsl,stmp3xxx-rtc", },
+	{ /* sentinel */ }
+};
+
 static struct platform_driver stmp3xxx_rtcdrv = {
 	.probe		= stmp3xxx_rtc_probe,
 	.remove		= stmp3xxx_rtc_remove,
@@ -273,6 +279,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
 	.driver		= {
 		.name	= "stmp3xxx-rtc",
 		.owner	= THIS_MODULE,
+		.of_match_table = rtc_dt_ids,
 	},
 };
 
-- 
1.7.10

             reply	other threads:[~2012-06-08 18:56 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-08 18:56 Marek Vasut [this message]
     [not found] ` <1339181804-22822-1-git-send-email-marex-ynQEQJNshbs@public.gmane.org>
2012-06-08 18:58   ` [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc Rob Herring
2012-06-11  3:53   ` Shawn Guo
2012-06-25  4:37   ` Shawn Guo
     [not found]     ` <20120625043711.GA18156-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-06-29 11:08       ` Marc Kleine-Budde
     [not found]         ` <4FED8CA1.5000800-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-06-29 11:30           ` Shawn Guo
     [not found]             ` <20120629113047.GD29197-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-06-29 11:32               ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1339181804-22822-1-git-send-email-marex@denx.de \
    --to=marex@denx.de \
    --cc=a.zummo@towertech.it \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=rob.herring@calxeda.com \
    --cc=rtc-linux@googlegroups.com \
    --cc=shawn.guo@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).