[PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc

[PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc

[Marek Vasut]

Add simple binding for the stmp3xxx-rtc.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: rtc-linux@googlegroups.com
Cc: Shawn Guo <shawn.guo@linaro.org>
---
 .../devicetree/bindings/rtc/stmp3xxx-rtc.txt        |   19 +++++++++++++++++++
 arch/arm/boot/dts/imx28.dtsi                        |    1 +
 drivers/rtc/rtc-stmp3xxx.c                          |    7 +++++++
 3 files changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt

V2: Fix typos, remove fsl,imx28-rtc

diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
new file mode 100644
index 0000000..a7a7de5
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
@@ -0,0 +1,19 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+    * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: Two interrupt numbers to the cpu should be specified. First
+  interrupt number is the rtc tick interrupt and second interrupt number
+  is the rtc alarm interrupt. The number of cells representing a interrupt
+  depends on the parent interrupt controller.
+
+Example:
+
+	rtc@80056000 {
+		compatible = "fsl,stmp3xxx-rtc";
+		reg = <0x80056000 2000>;
+		interrupts = <28 29>;
+	};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index cabcce8..5053019 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -387,6 +387,7 @@
 			};
 
 			rtc@80056000 {
+				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 				reg = <0x80056000 2000>;
 				interrupts = <28 29>;
 				status = "disabled";
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index 1028786..3aadb58 100644
--- a/drivers/rtc/rtc-stmp3xxx.c
+++ b/drivers/rtc/rtc-stmp3xxx.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
+#include <linux/of_device.h>
 
 #include <mach/common.h>
 
@@ -265,6 +266,11 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
 #define stmp3xxx_rtc_resume	NULL
 #endif
 
+static const struct of_device_id rtc_dt_ids[] = {
+	{ .compatible = "fsl,stmp3xxx-rtc", },
+	{ /* sentinel */ }
+};
+
 static struct platform_driver stmp3xxx_rtcdrv = {
 	.probe		= stmp3xxx_rtc_probe,
 	.remove		= stmp3xxx_rtc_remove,
@@ -273,6 +279,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
 	.driver		= {
 		.name	= "stmp3xxx-rtc",
 		.owner	= THIS_MODULE,
+		.of_match_table = rtc_dt_ids,
 	},
 };
 
-- 
1.7.10

Re: [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc

[Rob Herring]

On 06/08/2012 01:56 PM, Marek Vasut wrote:
> Add simple binding for the stmp3xxx-rtc.
> 
> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
> Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
> Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
> Cc: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---

Acked-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>

>  .../devicetree/bindings/rtc/stmp3xxx-rtc.txt        |   19 +++++++++++++++++++
>  arch/arm/boot/dts/imx28.dtsi                        |    1 +
>  drivers/rtc/rtc-stmp3xxx.c                          |    7 +++++++
>  3 files changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
> 
> V2: Fix typos, remove fsl,imx28-rtc
> 
> diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
> new file mode 100644
> index 0000000..a7a7de5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
> @@ -0,0 +1,19 @@
> +* STMP3xxx/i.MX28 Time Clock controller
> +
> +Required properties:
> +- compatible: should be one of the following.
> +    * "fsl,stmp3xxx-rtc"
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- interrupts: Two interrupt numbers to the cpu should be specified. First
> +  interrupt number is the rtc tick interrupt and second interrupt number
> +  is the rtc alarm interrupt. The number of cells representing a interrupt
> +  depends on the parent interrupt controller.
> +
> +Example:
> +
> +	rtc@80056000 {
> +		compatible = "fsl,stmp3xxx-rtc";
> +		reg = <0x80056000 2000>;
> +		interrupts = <28 29>;
> +	};
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index cabcce8..5053019 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -387,6 +387,7 @@
>  			};
>  
>  			rtc@80056000 {
> +				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
>  				reg = <0x80056000 2000>;
>  				interrupts = <28 29>;
>  				status = "disabled";
> diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
> index 1028786..3aadb58 100644
> --- a/drivers/rtc/rtc-stmp3xxx.c
> +++ b/drivers/rtc/rtc-stmp3xxx.c
> @@ -25,6 +25,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/rtc.h>
>  #include <linux/slab.h>
> +#include <linux/of_device.h>
>  
>  #include <mach/common.h>
>  
> @@ -265,6 +266,11 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
>  #define stmp3xxx_rtc_resume	NULL
>  #endif
>  
> +static const struct of_device_id rtc_dt_ids[] = {
> +	{ .compatible = "fsl,stmp3xxx-rtc", },
> +	{ /* sentinel */ }
> +};
> +
>  static struct platform_driver stmp3xxx_rtcdrv = {
>  	.probe		= stmp3xxx_rtc_probe,
>  	.remove		= stmp3xxx_rtc_remove,
> @@ -273,6 +279,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
>  	.driver		= {
>  		.name	= "stmp3xxx-rtc",
>  		.owner	= THIS_MODULE,
> +		.of_match_table = rtc_dt_ids,
>  	},
>  };
>  

Re: [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc

[Shawn Guo]

On Fri, Jun 08, 2012 at 08:56:44PM +0200, Marek Vasut wrote:
> Add simple binding for the stmp3xxx-rtc.
> 
> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
> Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
> Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
> Cc: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Acked-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Re: [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc

[Shawn Guo]

On Fri, Jun 08, 2012 at 08:56:44PM +0200, Marek Vasut wrote:
> Add simple binding for the stmp3xxx-rtc.
> 
> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
> Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>

Hi Alessandro,

The patch has some changes on arch/arm/boot/dts/imx28.dtsi, and also we
need the patch to convert some board files over to device tree.  May I
have your ack to queue the patch on my tree?

Regards,
Shawn

> Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
> Cc: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  .../devicetree/bindings/rtc/stmp3xxx-rtc.txt        |   19 +++++++++++++++++++
>  arch/arm/boot/dts/imx28.dtsi                        |    1 +
>  drivers/rtc/rtc-stmp3xxx.c                          |    7 +++++++
>  3 files changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
> 
> V2: Fix typos, remove fsl,imx28-rtc
> 
> diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
> new file mode 100644
> index 0000000..a7a7de5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
> @@ -0,0 +1,19 @@
> +* STMP3xxx/i.MX28 Time Clock controller
> +
> +Required properties:
> +- compatible: should be one of the following.
> +    * "fsl,stmp3xxx-rtc"
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- interrupts: Two interrupt numbers to the cpu should be specified. First
> +  interrupt number is the rtc tick interrupt and second interrupt number
> +  is the rtc alarm interrupt. The number of cells representing a interrupt
> +  depends on the parent interrupt controller.
> +
> +Example:
> +
> +	rtc@80056000 {
> +		compatible = "fsl,stmp3xxx-rtc";
> +		reg = <0x80056000 2000>;
> +		interrupts = <28 29>;
> +	};
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index cabcce8..5053019 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -387,6 +387,7 @@
>  			};
>  
>  			rtc@80056000 {
> +				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
>  				reg = <0x80056000 2000>;
>  				interrupts = <28 29>;
>  				status = "disabled";
> diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
> index 1028786..3aadb58 100644
> --- a/drivers/rtc/rtc-stmp3xxx.c
> +++ b/drivers/rtc/rtc-stmp3xxx.c
> @@ -25,6 +25,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/rtc.h>
>  #include <linux/slab.h>
> +#include <linux/of_device.h>
>  
>  #include <mach/common.h>
>  
> @@ -265,6 +266,11 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
>  #define stmp3xxx_rtc_resume	NULL
>  #endif
>  
> +static const struct of_device_id rtc_dt_ids[] = {
> +	{ .compatible = "fsl,stmp3xxx-rtc", },
> +	{ /* sentinel */ }
> +};
> +
>  static struct platform_driver stmp3xxx_rtcdrv = {
>  	.probe		= stmp3xxx_rtc_probe,
>  	.remove		= stmp3xxx_rtc_remove,
> @@ -273,6 +279,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
>  	.driver		= {
>  		.name	= "stmp3xxx-rtc",
>  		.owner	= THIS_MODULE,
> +		.of_match_table = rtc_dt_ids,
>  	},
>  };
>  
> -- 
> 1.7.10
> 

Re: [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 4451 bytes --]

On 06/25/2012 06:37 AM, Shawn Guo wrote:
> On Fri, Jun 08, 2012 at 08:56:44PM +0200, Marek Vasut wrote:
>> Add simple binding for the stmp3xxx-rtc.
>>
>> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
>> Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
> 
> Hi Alessandro,
> 
> The patch has some changes on arch/arm/boot/dts/imx28.dtsi, and also we
> need the patch to convert some board files over to device tree.  May I
> have your ack to queue the patch on my tree?

The interrupt numbers are not as the driver expects them..

> 
> Regards,
> Shawn
> 
>> Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
>> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
>> Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
>> Cc: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
>> Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> ---
>>  .../devicetree/bindings/rtc/stmp3xxx-rtc.txt        |   19 +++++++++++++++++++
>>  arch/arm/boot/dts/imx28.dtsi                        |    1 +
>>  drivers/rtc/rtc-stmp3xxx.c                          |    7 +++++++
>>  3 files changed, 27 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>>
>> V2: Fix typos, remove fsl,imx28-rtc
>>
>> diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>> new file mode 100644
>> index 0000000..a7a7de5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
>> @@ -0,0 +1,19 @@
>> +* STMP3xxx/i.MX28 Time Clock controller
>> +
>> +Required properties:
>> +- compatible: should be one of the following.
>> +    * "fsl,stmp3xxx-rtc"
>> +- reg: physical base address of the controller and length of memory mapped
>> +  region.
>> +- interrupts: Two interrupt numbers to the cpu should be specified. First
>> +  interrupt number is the rtc tick interrupt and second interrupt number
>> +  is the rtc alarm interrupt. The number of cells representing a interrupt
>> +  depends on the parent interrupt controller.

The driver expects the first interrupt to the the alarm interrupt, the
event interrupt is not use, yet.

>> +
>> +Example:
>> +
>> +	rtc@80056000 {
>> +		compatible = "fsl,stmp3xxx-rtc";
>> +		reg = <0x80056000 2000>;
>> +		interrupts = <28 29>;
>> +	};
>> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
>> index cabcce8..5053019 100644
>> --- a/arch/arm/boot/dts/imx28.dtsi
>> +++ b/arch/arm/boot/dts/imx28.dtsi
>> @@ -387,6 +387,7 @@
>>  			};
>>  
>>  			rtc@80056000 {
>> +				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
>>  				reg = <0x80056000 2000>;
>>  				interrupts = <28 29>;

should be:
                                             <29 28>


>>  				status = "disabled";
>> diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
>> index 1028786..3aadb58 100644
>> --- a/drivers/rtc/rtc-stmp3xxx.c
>> +++ b/drivers/rtc/rtc-stmp3xxx.c
>> @@ -25,6 +25,7 @@
>>  #include <linux/interrupt.h>
>>  #include <linux/rtc.h>
>>  #include <linux/slab.h>
>> +#include <linux/of_device.h>
>>  
>>  #include <mach/common.h>
>>  
>> @@ -265,6 +266,11 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
>>  #define stmp3xxx_rtc_resume	NULL
>>  #endif
>>  
>> +static const struct of_device_id rtc_dt_ids[] = {
>> +	{ .compatible = "fsl,stmp3xxx-rtc", },
>> +	{ /* sentinel */ }
>> +};
>> +
>>  static struct platform_driver stmp3xxx_rtcdrv = {
>>  	.probe		= stmp3xxx_rtc_probe,
>>  	.remove		= stmp3xxx_rtc_remove,
>> @@ -273,6 +279,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
>>  	.driver		= {
>>  		.name	= "stmp3xxx-rtc",
>>  		.owner	= THIS_MODULE,
>> +		.of_match_table = rtc_dt_ids,
>>  	},
>>  };
>>  
>> -- 
>> 1.7.10
>>
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[-- Attachment #2: Type: text/plain, Size: 192 bytes --]

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Re: [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc

[Shawn Guo]

On Fri, Jun 29, 2012 at 01:08:17PM +0200, Marc Kleine-Budde wrote:
> On 06/25/2012 06:37 AM, Shawn Guo wrote:
> > On Fri, Jun 08, 2012 at 08:56:44PM +0200, Marek Vasut wrote:
> >> Add simple binding for the stmp3xxx-rtc.
> >>
> >> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
> >> Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
> > 
> > Hi Alessandro,
> > 
> > The patch has some changes on arch/arm/boot/dts/imx28.dtsi, and also we
> > need the patch to convert some board files over to device tree.  May I
> > have your ack to queue the patch on my tree?
> 
> The interrupt numbers are not as the driver expects them..
> 
Right.  I sent a v3 fixing it.

http://article.gmane.org/gmane.linux.drivers.devicetree/17133

-- 
Regards,
Shawn

Re: [PATCH V2] MXS: Add DT binding support into stmp3xxx-rtc

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 1157 bytes --]

On 06/29/2012 01:30 PM, Shawn Guo wrote:
> On Fri, Jun 29, 2012 at 01:08:17PM +0200, Marc Kleine-Budde wrote:
>> On 06/25/2012 06:37 AM, Shawn Guo wrote:
>>> On Fri, Jun 08, 2012 at 08:56:44PM +0200, Marek Vasut wrote:
>>>> Add simple binding for the stmp3xxx-rtc.
>>>>
>>>> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
>>>> Cc: Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>
>>>
>>> Hi Alessandro,
>>>
>>> The patch has some changes on arch/arm/boot/dts/imx28.dtsi, and also we
>>> need the patch to convert some board files over to device tree.  May I
>>> have your ack to queue the patch on my tree?
>>
>> The interrupt numbers are not as the driver expects them..
>>
> Right.  I sent a v3 fixing it.

Oh, I missed that.

> http://article.gmane.org/gmane.linux.drivers.devicetree/17133

Sorry for the noise,
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[-- Attachment #2: Type: text/plain, Size: 192 bytes --]

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss