From: Kishon Vijay Abraham I <kishon@ti.com>
To: grant.likely@secretlab.ca, rob.herring@calxeda.com,
rob@landley.net, linux@arm.linux.org.uk,
gregkh@linuxfoundation.org, kishon@ti.com, b-cousson@ti.com,
rnayak@ti.com, tony@atomide.com,
devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, balbi@ti.com,
hvaibhav@ti.com, linux-omap@vger.kernel.org,
linux-usb@vger.kernel.org
Subject: [RFC PATCH 10/10] arm: omap: phy: remove unused functions from omap-phy-internal.c
Date: Fri, 22 Jun 2012 19:02:19 +0530 [thread overview]
Message-ID: <1340371939-23572-11-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1340371939-23572-1-git-send-email-kishon@ti.com>
All the unnessary functions in omap-phy-internal is removed.
These functionality are now handled by omap-usb2 phy driver.
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/omap_phy_internal.c | 138 -------------------------------
arch/arm/mach-omap2/twl-common.c | 5 -
2 files changed, 0 insertions(+), 143 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index b2c9253..9a9e960 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -31,144 +31,6 @@
#include <plat/usb.h>
#include <mach/control.h>
-/* OMAP control module register for UTMI PHY */
-#define CONTROL_DEV_CONF 0x300
-#define PHY_PD 0x1
-
-#define USBOTGHS_CONTROL 0x33c
-#define AVALID BIT(0)
-#define BVALID BIT(1)
-#define VBUSVALID BIT(2)
-#define SESSEND BIT(3)
-#define IDDIG BIT(4)
-
-static struct clk *phyclk, *clk48m, *clk32k;
-static void __iomem *ctrl_base;
-static int usbotghs_control;
-
-int omap4430_phy_init(struct device *dev)
-{
- ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
- if (!ctrl_base) {
- pr_err("control module ioremap failed\n");
- return -ENOMEM;
- }
- /* Power down the phy */
- __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-
- if (!dev) {
- iounmap(ctrl_base);
- return 0;
- }
-
- phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
- if (IS_ERR(phyclk)) {
- dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
- iounmap(ctrl_base);
- return PTR_ERR(phyclk);
- }
-
- clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
- if (IS_ERR(clk48m)) {
- dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
- clk_put(phyclk);
- iounmap(ctrl_base);
- return PTR_ERR(clk48m);
- }
-
- clk32k = clk_get(dev, "usb_phy_cm_clk32k");
- if (IS_ERR(clk32k)) {
- dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
- clk_put(phyclk);
- clk_put(clk48m);
- iounmap(ctrl_base);
- return PTR_ERR(clk32k);
- }
- return 0;
-}
-
-int omap4430_phy_set_clk(struct device *dev, int on)
-{
- static int state;
-
- if (on && !state) {
- /* Enable the phy clocks */
- clk_enable(phyclk);
- clk_enable(clk48m);
- clk_enable(clk32k);
- state = 1;
- } else if (state) {
- /* Disable the phy clocks */
- clk_disable(phyclk);
- clk_disable(clk48m);
- clk_disable(clk32k);
- state = 0;
- }
- return 0;
-}
-
-int omap4430_phy_power(struct device *dev, int ID, int on)
-{
- if (on) {
- if (ID)
- /* enable VBUS valid, IDDIG groung */
- __raw_writel(AVALID | VBUSVALID, ctrl_base +
- USBOTGHS_CONTROL);
- else
- /*
- * Enable VBUS Valid, AValid and IDDIG
- * high impedance
- */
- __raw_writel(IDDIG | AVALID | VBUSVALID,
- ctrl_base + USBOTGHS_CONTROL);
- } else {
- /* Enable session END and IDIG to high impedance. */
- __raw_writel(SESSEND | IDDIG, ctrl_base +
- USBOTGHS_CONTROL);
- }
- return 0;
-}
-
-int omap4430_phy_suspend(struct device *dev, int suspend)
-{
- if (suspend) {
- /* Disable the clocks */
- omap4430_phy_set_clk(dev, 0);
- /* Power down the phy */
- __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-
- /* save the context */
- usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
- } else {
- /* Enable the internel phy clcoks */
- omap4430_phy_set_clk(dev, 1);
- /* power on the phy */
- if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
- __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
- mdelay(200);
- }
-
- /* restore the context */
- __raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
- }
-
- return 0;
-}
-
-int omap4430_phy_exit(struct device *dev)
-{
- if (ctrl_base)
- iounmap(ctrl_base);
- if (phyclk)
- clk_put(phyclk);
- if (clk48m)
- clk_put(clk48m);
- if (clk32k)
- clk_put(clk32k);
-
- return 0;
-}
-
void am35x_musb_reset(void)
{
u32 regval;
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a9..396d189 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -250,11 +250,6 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
#if defined(CONFIG_ARCH_OMAP4)
static struct twl4030_usb_data omap4_usb_pdata = {
- .phy_init = omap4430_phy_init,
- .phy_exit = omap4430_phy_exit,
- .phy_power = omap4430_phy_power,
- .phy_set_clock = omap4430_phy_set_clk,
- .phy_suspend = omap4430_phy_suspend,
};
static struct regulator_init_data omap4_vdac_idata = {
--
1.7.5.4
prev parent reply other threads:[~2012-06-22 13:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-22 13:32 [RFC PATCH 00/10] omap: musb: Add device tree support Kishon Vijay Abraham I
2012-06-22 13:32 ` [RFC PATCH 01/10] drivers: usb: otg: add a new driver for omap usb2 phy Kishon Vijay Abraham I
2012-06-22 13:32 ` [RFC PATCH 02/10] arm/dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
2012-06-22 13:32 ` [RFC PATCH 03/10] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2 Kishon Vijay Abraham I
2012-06-22 13:32 ` [RFC PATCH 04/10] drivers: usb: twl6030: Add dt support for twl6030 usb Kishon Vijay Abraham I
[not found] ` <1340371939-23572-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2012-06-22 13:32 ` [RFC PATCH 05/10] arm/dts: Add twl6030-usb data Kishon Vijay Abraham I
2012-06-22 13:32 ` [RFC PATCH 06/10] drivers: usb: twl4030: Add device tree support for twl4030 usb Kishon Vijay Abraham I
2012-06-22 13:32 ` [RFC PATCH 07/10] arm/dts: Add twl4030-usb data Kishon Vijay Abraham I
2012-06-22 13:32 ` [RFC PATCH 08/10] drivers: usb: musb: Add device tree support for omap musb glue Kishon Vijay Abraham I
2012-06-22 13:32 ` [RFC PATCH 09/10] arm/dts: omap: Add usb_otg and glue data Kishon Vijay Abraham I
2012-06-22 13:32 ` Kishon Vijay Abraham I [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340371939-23572-11-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=gregkh@linuxfoundation.org \
--cc=hvaibhav@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=rnayak@ti.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).