From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: [PATCH] bindings: update imx and mxs #gpio-cells Date: Thu, 28 Jun 2012 11:15:37 +0800 Message-ID: <1340853337-4406-1-git-send-email-shawn.guo@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, Hui Wang , Marc Kleine-Budde List-Id: devicetree@vger.kernel.org The of_get_named_gpio_flags can retrieve the second cell of gpio-specifier as the "flags". The imx and mxs gpio driver do not have their own .xlate callback, which means of_gpio_simple_xlate is used and it's a 1:1 mapping between gpio controller flags and Linux "enum of_gpio_flags". Update imx and mxs bindings document to make it clear. Signed-off-by: Shawn Guo --- .../devicetree/bindings/gpio/fsl-imx-gpio.txt | 5 +++-- .../devicetree/bindings/gpio/gpio-mxs.txt | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt index 4363ae4..5f360e7 100644 --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt @@ -8,8 +8,9 @@ Required properties: by low 16 pins and the second one is for high 16 pins. - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify optional parameters (currently - unused). + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low Example: diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt index 0c35673..1e677a4 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt @@ -13,8 +13,9 @@ Required properties for GPIO node: - interrupts : Should be the port interrupt shared by all 32 pins. - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify optional parameters (currently - unused). + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low - interrupt-controller: Marks the device node as an interrupt controller. - #interrupt-cells : Should be 2. The first cell is the GPIO number. The second cell bits[3:0] is used to specify trigger type and level flags: -- 1.7.5.4