From mboxrd@z Thu Jan 1 00:00:00 1970 From: AnilKumar Ch Subject: [PATCH 2/2] arm/dts: Configure pinmuxs for user leds control on Bone Date: Thu, 5 Jul 2012 14:43:36 +0530 Message-ID: <1341479616-18630-3-git-send-email-anilkumar@ti.com> References: <1341479616-18630-1-git-send-email-anilkumar@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1341479616-18630-1-git-send-email-anilkumar@ti.com> Sender: linux-omap-owner@vger.kernel.org To: linux-omap@vger.kernel.org Cc: tony@atomide.com, b-cousson@ti.com, linux-arm-kernel@lists.infradead.org, devicetree-discuss@lists.ozlabs.org, grant.likely@secretlab.ca, AnilKumar Ch List-Id: devicetree@vger.kernel.org Adds GPIO pinctrl nodes to am3358_pinmux master node to control user leds (USR0, USR1, USR2 and USR3) present on BeagleBone. Signed-off-by: AnilKumar Ch --- arch/arm/boot/dts/am335x-bone.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index a9af4db..c3810b7 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -18,3 +18,27 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; }; + +&am3358_pinmux { + + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + userled_pins: pinmux_userled_pins { + gpmc_a5.gpio1_21 { + pinctrl-simple,cells = <0x54 0x7>; /* OMAP_PIN_OUTPUT | OMAP_MUX_MODE7 */ + }; + + gpmc_a6.gpio1_22 { + pinctrl-simple,cells = <0x58 0x17>; /* OMAP_PIN_OUTPUT_PULLUP | OMAP_MUX_MODE7 */ + }; + + gpmc_a7.gpio1_23 { + pinctrl-simple,cells = <0x5C 0x7>; /* OMAP_PIN_OUTPUT | OMAP_MUX_MODE7 */ + }; + + gpmc_a8.gpio1_24 { + pinctrl-simple,cells = <0x60 0x17>; /* OMAP_PIN_OUTPUT_PULLUP | OMAP_MUX_MODE7 */ + }; + }; +}; -- 1.7.9.5