From: Ajay Kumar Gupta <ajay.gupta-l0cyMroinI0@public.gmane.org>
To: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
Ajay Kumar Gupta <ajay.gupta-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 01/11] usb: musb: add musb->id to identify core instance
Date: Thu, 12 Jul 2012 15:23:24 +0530 [thread overview]
Message-ID: <1342086814-32181-2-git-send-email-ajay.gupta@ti.com> (raw)
In-Reply-To: <1342086814-32181-1-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
Added 'id' field within 'struct musb' which can be used to determine
the current instance of musb controller.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta-l0cyMroinI0@public.gmane.org>
---
drivers/usb/musb/am35x.c | 2 +-
drivers/usb/musb/blackfin.c | 2 +-
drivers/usb/musb/da8xx.c | 2 +-
drivers/usb/musb/davinci.c | 2 +-
drivers/usb/musb/musb_core.c | 2 ++
drivers/usb/musb/musb_core.h | 2 ++
drivers/usb/musb/musb_dsps.c | 2 +-
drivers/usb/musb/omap2430.c | 2 +-
drivers/usb/musb/tusb6010.c | 2 +-
drivers/usb/musb/ux500.c | 2 +-
10 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 7a95ab8..cc0f06a 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -475,7 +475,7 @@ static int __devinit am35x_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", -1);
+ musb = platform_device_alloc("musb-hdrc", pdev->id);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err1;
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 428e6aa..c217781 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -478,7 +478,7 @@ static int __devinit bfin_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", -1);
+ musb = platform_device_alloc("musb-hdrc", pdev->id);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err1;
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 0f9fcec..3f072a0 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -496,7 +496,7 @@ static int __devinit da8xx_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", -1);
+ musb = platform_device_alloc("musb-hdrc", pdev->id);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err1;
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 472c8b4..b1f3fb0 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -530,7 +530,7 @@ static int __devinit davinci_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", -1);
+ musb = platform_device_alloc("musb-hdrc", pdev->id);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err1;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 89d1871..f6ce66f 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1867,6 +1867,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
int status;
struct musb *musb;
struct musb_hdrc_platform_data *plat = dev->platform_data;
+ struct platform_device *pdev = to_platform_device(dev);
/* The driver might handle more features than the board; OK.
* Fail when the board needs a feature that's not enabled.
@@ -1889,6 +1890,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
pm_runtime_enable(musb->controller);
spin_lock_init(&musb->lock);
+ musb->id = pdev->id;
musb->board_mode = plat->mode;
musb->board_set_power = plat->set_power;
musb->min_power = plat->min_power;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 51bd7b2..24daafd 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -450,6 +450,8 @@ struct musb {
#ifdef MUSB_CONFIG_PROC_FS
struct proc_dir_entry *proc_entry;
#endif
+ /* id for multiple musb instances */
+ u8 id;
};
static inline struct musb *gadget_to_musb(struct usb_gadget *g)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 46b07cc..71fbe0e 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -535,7 +535,7 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
resources[1].name = "mc";
/* allocate the child platform device */
- musb = platform_device_alloc("musb-hdrc", -1);
+ musb = platform_device_alloc("musb-hdrc", pdev->id);
if (!musb) {
dev_err(dev, "failed to allocate musb device\n");
ret = -ENOMEM;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 5fdb9da..15506a4 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -448,7 +448,7 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", -1);
+ musb = platform_device_alloc("musb-hdrc", pdev->id);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err0;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 1a1bd9c..901aa05 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1182,7 +1182,7 @@ static int __devinit tusb_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", -1);
+ musb = platform_device_alloc("musb-hdrc", pdev->id);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err1;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index a8c0fad..1eafb7c 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -74,7 +74,7 @@ static int __devinit ux500_probe(struct platform_device *pdev)
goto err0;
}
- musb = platform_device_alloc("musb-hdrc", -1);
+ musb = platform_device_alloc("musb-hdrc", pdev->id);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err1;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-07-12 9:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-12 9:53 [PATCH 00/11] usb: musb: adding multi instance support Ajay Kumar Gupta
2012-07-12 9:53 ` [PATCH 02/11] usb: musb: kill global and static for multi instance Ajay Kumar Gupta
2012-07-12 9:53 ` [PATCH 03/11] usb: musb: am335x: add support for dual instance Ajay Kumar Gupta
2012-07-12 9:53 ` [PATCH 05/11] usb: musb: dsps: add dt support Ajay Kumar Gupta
2012-07-12 9:53 ` [PATCH 07/11] usb: otg: nop: " Ajay Kumar Gupta
2012-07-12 9:53 ` [PATCH 08/11] arm/dts: am33xx: add dt data for usb nop phy Ajay Kumar Gupta
[not found] ` <1342086814-32181-1-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2012-07-12 9:53 ` Ajay Kumar Gupta [this message]
2012-07-12 9:53 ` [PATCH 04/11] usb: otg: nop: add support for multiple tranceiver Ajay Kumar Gupta
2012-07-12 9:53 ` [PATCH 06/11] arm/dts: am33xx: Add dt data for usbss Ajay Kumar Gupta
2012-07-12 9:53 ` [PATCH 09/11] usb: musb: dsps: remove explicit NOP device creation Ajay Kumar Gupta
2012-07-12 9:53 ` [PATCH 10/11] usb: musb: dsps: get the PHY using phandle api Ajay Kumar Gupta
2012-07-12 9:53 ` [PATCH 11/11] arm/dts: am33xx: add phy phandle to usbss Ajay Kumar Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342086814-32181-2-git-send-email-ajay.gupta@ti.com \
--to=ajay.gupta-l0cymroini0@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).