From: Ajay Kumar Gupta <ajay.gupta@ti.com>
To: linux-usb@vger.kernel.org
Cc: linux-omap@vger.kernel.org, balbi@ti.com,
grant.likely@secretlab.ca, devicetree-discuss@lists.ozlabs.org,
tony@atomide.com, Ajay Kumar Gupta <ajay.gupta@ti.com>
Subject: [PATCH v3 02/11] usb: musb: kill global and static for multi instance
Date: Thu, 19 Jul 2012 11:11:30 +0530 [thread overview]
Message-ID: <1342676499-32507-3-git-send-email-ajay.gupta@ti.com> (raw)
In-Reply-To: <1342676499-32507-1-git-send-email-ajay.gupta@ti.com>
Moved global variable "musb_debugfs_root" and static variable
"old_state" to 'struct musb' to help support multi instance of
musb controller as present on AM335x platform.
Also removed the global variable "orig_dma_mask" and filled the
dev->dma_mask with parent device's dma_mask.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
---
drivers/usb/musb/musb_core.c | 16 +++-------------
drivers/usb/musb/musb_core.h | 4 ++++
drivers/usb/musb/musb_debugfs.c | 14 ++++++++------
3 files changed, 15 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3e09984..a5db4dd 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1802,10 +1802,9 @@ static const struct attribute_group musb_attr_group = {
static void musb_irq_work(struct work_struct *data)
{
struct musb *musb = container_of(data, struct musb, irq_work);
- static int old_state;
- if (musb->xceiv->state != old_state) {
- old_state = musb->xceiv->state;
+ if (musb->xceiv->state != musb->xceiv_old_state) {
+ musb->xceiv_old_state = musb->xceiv->state;
sysfs_notify(&musb->controller->kobj, NULL, "mode");
}
}
@@ -2115,11 +2114,6 @@ fail0:
/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
* bridge to a platform device; this driver then suffices.
*/
-
-#ifndef CONFIG_MUSB_PIO_ONLY
-static u64 *orig_dma_mask;
-#endif
-
static int __devinit musb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -2138,10 +2132,6 @@ static int __devinit musb_probe(struct platform_device *pdev)
return -ENOMEM;
}
-#ifndef CONFIG_MUSB_PIO_ONLY
- /* clobbered by use_dma=n */
- orig_dma_mask = dev->dma_mask;
-#endif
status = musb_init_controller(dev, irq, base);
if (status < 0)
iounmap(base);
@@ -2166,7 +2156,7 @@ static int __devexit musb_remove(struct platform_device *pdev)
iounmap(ctrl_base);
device_init_wakeup(&pdev->dev, 0);
#ifndef CONFIG_MUSB_PIO_ONLY
- pdev->dev.dma_mask = orig_dma_mask;
+ pdev->dev.dma_mask = (&dev->dev.parent)->dma_mask;
#endif
return 0;
}
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 69ed141..6b6cee9 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -452,6 +452,10 @@ struct musb {
#endif
/* id for multiple musb instances */
u8 id;
+ int xceiv_old_state;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs_root;
+#endif
};
static inline struct musb *gadget_to_musb(struct usb_gadget *g)
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 40a37c9..b1e8f21 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -103,8 +103,6 @@ static const struct musb_register_map musb_regmap[] = {
{ } /* Terminating Entry */
};
-static struct dentry *musb_debugfs_root;
-
static int musb_regdump_show(struct seq_file *s, void *unused)
{
struct musb *musb = s->private;
@@ -240,20 +238,24 @@ int __devinit musb_init_debugfs(struct musb *musb)
struct dentry *root;
struct dentry *file;
int ret;
+ char name[10];
- root = debugfs_create_dir("musb", NULL);
+ sprintf(name, "musb%d", musb->id);
+ root = debugfs_create_dir(name, NULL);
if (!root) {
ret = -ENOMEM;
goto err0;
}
- file = debugfs_create_file("regdump", S_IRUGO, root, musb,
+ sprintf(name, "regdump%d", musb->id);
+ file = debugfs_create_file(name, S_IRUGO, root, musb,
&musb_regdump_fops);
if (!file) {
ret = -ENOMEM;
goto err1;
}
+ sprintf(name, "testmode%d", musb->id);
file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR,
root, musb, &musb_test_mode_fops);
if (!file) {
@@ -261,7 +263,7 @@ int __devinit musb_init_debugfs(struct musb *musb)
goto err1;
}
- musb_debugfs_root = root;
+ musb->debugfs_root = root;
return 0;
@@ -274,5 +276,5 @@ err0:
void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb)
{
- debugfs_remove_recursive(musb_debugfs_root);
+ debugfs_remove_recursive(musb->debugfs_root);
}
--
1.7.0.4
next prev parent reply other threads:[~2012-07-19 5:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-19 5:41 [PATCH v3 00/11] usb: musb: adding multi instance support Ajay Kumar Gupta
2012-07-19 5:41 ` [PATCH v3 01/11] usb: musb: add musb->id to identify core instance Ajay Kumar Gupta
2012-07-19 5:41 ` Ajay Kumar Gupta [this message]
[not found] ` <1342676499-32507-1-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2012-07-19 5:41 ` [PATCH v3 03/11] usb: musb: am335x: add support for dual instance Ajay Kumar Gupta
2012-07-19 5:41 ` [PATCH v3 04/11] usb: otg: nop: add support for multiple tranceiver Ajay Kumar Gupta
2012-07-19 9:23 ` ABRAHAM, KISHON VIJAY
2012-07-19 10:15 ` Gupta, Ajay Kumar
2012-07-19 5:41 ` [PATCH v3 09/11] usb: musb: dsps: remove explicit NOP device creation Ajay Kumar Gupta
2012-07-19 5:41 ` [PATCH v3 10/11] usb: musb: dsps: get the PHY using phandle api Ajay Kumar Gupta
2012-07-19 5:41 ` [PATCH v3 11/11] arm/dts: am33xx: add phy phandle to usbss Ajay Kumar Gupta
2012-07-19 5:41 ` [PATCH v3 05/11] usb: musb: dsps: add dt support Ajay Kumar Gupta
2012-07-19 5:41 ` [PATCH v3 06/11] arm/dts: am33xx: Add dt data for usbss Ajay Kumar Gupta
2012-07-19 5:41 ` [PATCH v3 07/11] usb: otg: nop: add dt support Ajay Kumar Gupta
2012-07-19 9:25 ` ABRAHAM, KISHON VIJAY
2012-07-19 10:09 ` Gupta, Ajay Kumar
2012-07-19 5:41 ` [PATCH v3 08/11] arm/dts: am33xx: add dt data for usb nop phy Ajay Kumar Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342676499-32507-3-git-send-email-ajay.gupta@ti.com \
--to=ajay.gupta@ti.com \
--cc=balbi@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).