devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: kishon@ti.com, grant.likely@secretlab.ca,
	rob.herring@calxeda.com, rob@landley.net, linux@arm.linux.org.uk,
	gregkh@linuxfoundation.org, b-cousson@ti.com, rnayak@ti.com,
	tony@atomide.com, devicetree-discuss@lists.ozlabs.org,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, balbi@ti.com,
	linux-omap@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [PATCH v5 00/11] omap: musb: Add device tree support
Date: Fri, 20 Jul 2012 11:07:20 +0530	[thread overview]
Message-ID: <1342762651-17094-1-git-send-email-kishon@ti.com> (raw)

This patch series adds device tree support for MUSB and device
tree support for all the related modules to get MUSB working in
OMAP platform.

A new omap-usb2 phy driver has been added (with only dt suppport)
to perform phy configurations. Previously this configuration was
performed by twl6030, using pdata function pointers.

With the addition of omap-usb2 to perform phy configurations,
twl6030 is made as a comparator driver to detect VBUS and ID events
and notify it to the glue layer.

musb core is _NOT_ yet converted to support device tree support as it
would need lot of driver re-design because of its enormous use of
function pointers. That will be in _TO DO_ list.

Changes from v4:
duplicate getting of 'mode' property is removed in omap-musb glue.

Changes from v3:
remove the address in the node name of usb_otg_hs since the usb_otg_hs
node doesn't have a reg property. Thanks Ajay Gupta for finding this.

Changes from v2:
Fixed Sergei's comment to remove *0x* prefix in usb2phy@0x4a0ad080

Changes from v1:
* Fixed Rajendra Nayak comments (regulator naming, compatible naming of
musb and other minor cleanups.)
* It's agreed to have ocp2scp in drivers/bus and usb2 phy is a child of
ocp2scp, the documentation is updated accordingly.

Changes from RFC:
Removed the dependency on [RFC PATCH 00/11] OMAP System Control Module.
Writing to control module register is now handled in otg driver itself.
Once the system control module driver get upstreamed, I'll send a patch
to make use of API's in control module driver to write to control
module register.

This series was developed on
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv

This patch series depends on
[PATCH 0/2] omap: add ocp2scp as a bus driver

Performed MUSB device mode testing on OMAP4 panda, OMAP4 SDP
and OMAP3 beagle.

Kishon Vijay Abraham I (11):
  drivers: usb: otg: add a new driver for omap usb2 phy
  arm/dts: omap: Add omap-usb2 dt data
  drivers: usb: otg: make twl6030_usb as a comparator driver to
    omap_usb2
  arm: omap: hwmod: add a new addr space in otg for writing to control
    module
  drivers: usb: twl6030: Add dt support for twl6030 usb
  arm/dts: Add twl6030-usb data
  drivers: usb: twl4030: Add device tree support for twl4030 usb
  arm/dts: Add twl4030-usb data
  drivers: usb: musb: Add device tree support for omap musb glue
  arm/dts: omap: Add usb_otg and glue data
  arm: omap: phy: remove unused functions from omap-phy-internal.c

 .../devicetree/bindings/bus/omap-ocp2scp.txt       |    3 +
 Documentation/devicetree/bindings/usb/omap-usb.txt |   48 ++++
 .../devicetree/bindings/usb/twlxxxx-usb.txt        |   41 +++
 arch/arm/boot/dts/omap3-beagle.dts                 |    6 +
 arch/arm/boot/dts/omap3-evm.dts                    |    6 +
 arch/arm/boot/dts/omap3.dtsi                       |    8 +
 arch/arm/boot/dts/omap4-panda.dts                  |   10 +
 arch/arm/boot/dts/omap4-sdp.dts                    |   10 +
 arch/arm/boot/dts/omap4.dtsi                       |   13 +
 arch/arm/boot/dts/twl4030.dtsi                     |   21 ++
 arch/arm/boot/dts/twl6030.dtsi                     |    6 +
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c         |    5 +
 arch/arm/mach-omap2/omap_phy_internal.c            |  138 ----------
 arch/arm/mach-omap2/twl-common.c                   |    5 -
 arch/arm/mach-omap2/usb-musb.c                     |    3 -
 drivers/usb/musb/omap2430.c                        |  106 +++++++-
 drivers/usb/musb/omap2430.h                        |    9 +
 drivers/usb/otg/Kconfig                            |   10 +
 drivers/usb/otg/Makefile                           |    1 +
 drivers/usb/otg/omap-usb2.c                        |  271 ++++++++++++++++++++
 drivers/usb/otg/twl4030-usb.c                      |   26 +-
 drivers/usb/otg/twl6030-usb.c                      |  153 +++--------
 include/linux/usb/omap_usb.h                       |   45 ++++
 include/linux/usb/phy_companion.h                  |   34 +++
 24 files changed, 705 insertions(+), 273 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/omap-usb.txt
 create mode 100644 Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
 create mode 100644 drivers/usb/otg/omap-usb2.c
 create mode 100644 include/linux/usb/omap_usb.h
 create mode 100644 include/linux/usb/phy_companion.h

-- 
1.7.9.5


             reply	other threads:[~2012-07-20  5:37 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-20  5:37 Kishon Vijay Abraham I [this message]
     [not found] ` <1342762651-17094-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2012-07-20  5:37   ` [PATCH v5 01/11] drivers: usb: otg: add a new driver for omap usb2 phy Kishon Vijay Abraham I
2012-07-20  5:37   ` [PATCH v5 02/11] arm/dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
2012-07-20  5:37   ` [PATCH v5 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb Kishon Vijay Abraham I
2012-07-20  5:37   ` [PATCH v5 08/11] arm/dts: Add twl4030-usb data Kishon Vijay Abraham I
2012-07-20  5:37 ` [PATCH v5 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2 Kishon Vijay Abraham I
2012-07-20  5:37 ` [PATCH v5 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module Kishon Vijay Abraham I
2012-07-20  5:37 ` [PATCH v5 06/11] arm/dts: Add twl6030-usb data Kishon Vijay Abraham I
2012-07-20  5:37 ` [PATCH v5 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb Kishon Vijay Abraham I
2012-07-20  5:37 ` [PATCH v5 09/11] drivers: usb: musb: Add device tree support for omap musb glue Kishon Vijay Abraham I
2012-07-20  5:37 ` [PATCH v5 10/11] arm/dts: omap: Add usb_otg and glue data Kishon Vijay Abraham I
2012-07-20  5:37 ` [PATCH v5 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1342762651-17094-1-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=b-cousson@ti.com \
    --cc=balbi@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=rnayak@ti.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).