From mboxrd@z Thu Jan 1 00:00:00 1970 From: AnilKumar Ch Subject: [PATCH v2 0/2] Add DT support to C_CAN/D_CAN controller Date: Wed, 25 Jul 2012 17:48:47 +0530 Message-ID: <1343218729-16954-1-git-send-email-anilkumar@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-can-owner@vger.kernel.org To: wg@grandegger.com, mkl@pengutronix.de, linux-can@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org, grant.likely@secretlab.ca, anantgole@ti.com, nsekhar@ti.com, AnilKumar Ch List-Id: devicetree@vger.kernel.org This patch series adds the device tree support to C_CAN/D_CAN controller with pinmux configuration and device tree data addition to corresponding dts and dtsi files. Also adds Runtime PM support to C_CAN/D_CAN controller. These patches have been tested on AM335x EVM using some additional patches to add device tree data to EVM dts files and to initialize D_CAN RAM. D_CAN raminit is controlled from control module register. This patch will be submitted once control module MFD driver support is added to mainline. Due to lack of hardware I am not able to test c_can functionality. I appreciate if anyone can test c_can functionality with this patch series. First and last patches applies on top of linux-next tree, 2nd and 3rd patches applies on linux-omap tree. Changes from v1: - Separated 4 patches into CAN driver specific and device tree data addition specific. - Incorporated Marc's comments on v1 * Modified c_can_dev_id enum to handle both devtype and platform device id index. * Removed "legacy bosch,c_can_platform" from DT bindings AnilKumar Ch (2): can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller .../devicetree/bindings/net/can/c_can.txt | 37 +++++++++++ drivers/net/can/c_can/c_can.h | 5 +- drivers/net/can/c_can/c_can_platform.c | 65 +++++++++++++++----- 3 files changed, 88 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/can/c_can.txt -- 1.7.9.5