From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Conor Dooley <conor@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Lucas Stach <l.stach@pengutronix.de>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] dt-bindings: interrupt-controller: fsl, irqsteer: Add power-domains
Date: Wed, 17 Jan 2024 08:31:26 +0100 [thread overview]
Message-ID: <13433324.uLZWGnKmhe@steina-w> (raw)
In-Reply-To: <20240111-dullness-blooper-37644405c825@spud>
Hi Conor,
Am Donnerstag, 11. Januar 2024, 17:49:03 CET schrieb Conor Dooley:
> On Thu, Jan 11, 2024 at 09:59:54AM +0100, Alexander Stein wrote:
> > Hi Conor,
> >
> > Am Mittwoch, 10. Januar 2024, 17:09:07 CET schrieb Conor Dooley:
> > > On Wed, Jan 10, 2024 at 10:43:38AM +0100, Alexander Stein wrote:
> > > > Some SoC like i.MX8QXP use a power-domain for this IP add it to the
> > > > supported proerties. Fixes the dtbs_check warning:
> > > > freescale/imx8qxp-tqma8xqp-mba8xx.dtb: irqsteer@56000000:
> > > > 'power-domains'
> > > >
> > > > does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >
> > > > from schema $id:
> > > > http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
> > > >
> > > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > > > ---
> > > >
> > > > Notes:
> > > > Please note that both the board dts and the DT node for irqsteer
> > > > being
> > > > used, are still work-in-progress.
> > >
> > > The binding doesn't even support the imx8qxp's irqsteer yet, I think
> > > this should be added alongside support for that SoC. Am I missing
> > > something?
> >
> > I'm not sure if any additional SoC support is actually needed. 'fsl,imx-
> > irqsteer' is available and that's what I use in my WiP. Also imx8mp also
> > just uses the generic compatible. Only imx8mq uses 'fsl,imx8m-irqsteer'.
> Why doesn't it used "imx8mq-irqsteer"? Should it not have its own
> soc-specific compatible?
I would assume that "fsl,imx8m-irqsteer" is for the whole i.MX8M family. I
don't think a soc-specific compatible is needed at all. On top I can't see any
difference between i.MX8M and i.MX8/i.MX8X.
If a soc-specific compatible is preferred, fine by me. But I don't expect any
difference despite imx8qxp/imx8qm requiring a power-domain.
Best regards,
Alexander
> Cheers,
> Conor.
>
> > AFAICS the bindings support the different amount of IRQs already.
> >
> > Best regards,
> > Alexander
> >
> > > > .../devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml | 3
> > > > +++
> > > > 1 file changed, 3 insertions(+)
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.
> > > > yam
> > > > l
> > > > b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.
> > > > yam
> > > > l index 20ad4ad82ad64..cb4fcd23627f6 100644
> > > > ---
> > > > a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.
> > > > yam
> > > > l +++
> > > > b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.
> > > > yam
> > > > l>
> > > >
> > > > @@ -42,6 +42,9 @@ properties:
> > > > clock-names:
> > > > const: ipg
> > > >
> > > > + power-domains:
> > > > + maxItems: 1
> > > > +
> > > >
> > > > interrupt-controller: true
> > > >
> > > > "#interrupt-cells":
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
next prev parent reply other threads:[~2024-01-17 7:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-10 9:43 [PATCH 1/1] dt-bindings: interrupt-controller: fsl,irqsteer: Add power-domains Alexander Stein
2024-01-10 16:09 ` Conor Dooley
2024-01-11 8:59 ` [PATCH 1/1] dt-bindings: interrupt-controller: fsl, irqsteer: " Alexander Stein
2024-01-11 16:49 ` Conor Dooley
2024-01-17 7:31 ` Alexander Stein [this message]
2024-01-17 15:14 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=13433324.uLZWGnKmhe@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=l.stach@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).