[PATCH v4 4/6] tegra: fdt: Add NAND definitions to fdt

[Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>]

Add a flash node to handle the NAND, including memory timings and
page / block size information.

Signed-off-by: Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
Changes in v2:
- Update NAND binding to add "nvidia," prefix

Changes in v3:
- Add reg property for unit address (should be used for chip select)
- Update fdt binding to make everything Nvidia-specific

Changes in v4:
- Remove fdt bindings related to page structure

 board/nvidia/dts/tegra20-seaboard.dts |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts
index 3352539..25a63a0 100644
--- a/board/nvidia/dts/tegra20-seaboard.dts
+++ b/board/nvidia/dts/tegra20-seaboard.dts
@@ -153,4 +153,14 @@
 			0x1f04008a>;
 		linux,fn-keymap = <0x05040002>;
 	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 59 0>;		/* PH3 */
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+		nand@0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+		};
+	};
 };
-- 
1.7.7.3