From: AnilKumar Ch <anilkumar@ti.com>
To: wg@grandegger.com, mkl@pengutronix.de, linux-can@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org, grant.likely@secretlab.ca,
anantgole@ti.com, nsekhar@ti.com, AnilKumar Ch <anilkumar@ti.com>
Subject: [PATCH v4 1/3] can: c_can: Modify c_can device names
Date: Thu, 2 Aug 2012 18:43:09 +0530 [thread overview]
Message-ID: <1343913191-14722-2-git-send-email-anilkumar@ti.com> (raw)
In-Reply-To: <1343913191-14722-1-git-send-email-anilkumar@ti.com>
Modify c_can device names from *_CAN_DEVTYPE to BOSCH_*_CAN to make
use of same names for array indexes in c_can_id_table[] as well as
device names.
This patch also add indexes to c_can_id_table array.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
drivers/net/can/c_can/c_can.h | 5 +++--
drivers/net/can/c_can/c_can_pci.c | 6 +++---
drivers/net/can/c_can/c_can_platform.c | 18 ++++++++++--------
3 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 01a7049..4e56baa 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -143,8 +143,9 @@ static const u16 reg_map_d_can[] = {
};
enum c_can_dev_id {
- C_CAN_DEVTYPE,
- D_CAN_DEVTYPE,
+ BOSCH_C_CAN_PLATFORM,
+ BOSCH_C_CAN,
+ BOSCH_D_CAN,
};
/* c_can private data structure */
diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c
index 1011146..3d7830b 100644
--- a/drivers/net/can/c_can/c_can_pci.c
+++ b/drivers/net/can/c_can/c_can_pci.c
@@ -120,10 +120,10 @@ static int __devinit c_can_pci_probe(struct pci_dev *pdev,
/* Configure CAN type */
switch (c_can_pci_data->type) {
- case C_CAN_DEVTYPE:
+ case BOSCH_C_CAN:
priv->regs = reg_map_c_can;
break;
- case D_CAN_DEVTYPE:
+ case BOSCH_D_CAN:
priv->regs = reg_map_d_can;
priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
break;
@@ -192,7 +192,7 @@ static void __devexit c_can_pci_remove(struct pci_dev *pdev)
}
static struct c_can_pci_data c_can_sta2x11= {
- .type = C_CAN_DEVTYPE,
+ .type = BOSCH_C_CAN,
.reg_align = C_CAN_REG_ALIGN_32,
.freq = 52000000, /* 52 Mhz */
};
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 6ff7ad0..5c46d1c 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -116,7 +116,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
priv = netdev_priv(dev);
id = platform_get_device_id(pdev);
switch (id->driver_data) {
- case C_CAN_DEVTYPE:
+ case BOSCH_C_CAN:
priv->regs = reg_map_c_can;
switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
case IORESOURCE_MEM_32BIT:
@@ -130,7 +130,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
break;
}
break;
- case D_CAN_DEVTYPE:
+ case BOSCH_D_CAN:
priv->regs = reg_map_d_can;
priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
@@ -196,15 +196,17 @@ static int __devexit c_can_plat_remove(struct platform_device *pdev)
}
static const struct platform_device_id c_can_id_table[] = {
- {
+ [BOSCH_C_CAN_PLATFORM] = {
.name = KBUILD_MODNAME,
- .driver_data = C_CAN_DEVTYPE,
- }, {
+ .driver_data = BOSCH_C_CAN,
+ },
+ [BOSCH_C_CAN] = {
.name = "c_can",
- .driver_data = C_CAN_DEVTYPE,
- }, {
+ .driver_data = BOSCH_C_CAN,
+ },
+ [BOSCH_D_CAN] = {
.name = "d_can",
- .driver_data = D_CAN_DEVTYPE,
+ .driver_data = BOSCH_D_CAN,
}, {
}
};
--
1.7.9.5
next prev parent reply other threads:[~2012-08-02 13:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-02 13:13 [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller AnilKumar Ch
2012-08-02 13:13 ` AnilKumar Ch [this message]
2012-08-06 9:36 ` [PATCH v4 1/3] can: c_can: Modify c_can device names Marc Kleine-Budde
[not found] ` <501F9031.8050709-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-08-06 9:41 ` AnilKumar, Chimata
2012-08-02 13:13 ` [PATCH v4 2/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller AnilKumar Ch
2012-08-06 9:37 ` Marc Kleine-Budde
2012-08-02 13:13 ` [PATCH v4 3/3] can: c_can: Add runtime PM " AnilKumar Ch
[not found] ` <1343913191-14722-4-git-send-email-anilkumar-l0cyMroinI0@public.gmane.org>
2012-08-03 6:32 ` Hiremath, Vaibhav
2012-08-03 19:09 ` Marc Kleine-Budde
2012-08-06 6:48 ` Hiremath, Vaibhav
[not found] ` <79CD15C6BA57404B839C016229A409A83EA85CC3-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2012-08-07 10:39 ` AnilKumar, Chimata
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343913191-14722-2-git-send-email-anilkumar@ti.com \
--to=anilkumar@ti.com \
--cc=anantgole@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=nsekhar@ti.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).