From: Kishon Vijay Abraham I <kishon@ti.com>
To: grant.likely@secretlab.ca, rob.herring@calxeda.com,
rob@landley.net, linux@arm.linux.org.uk,
gregkh@linuxfoundation.org, b-cousson@ti.com, rnayak@ti.com,
tony@atomide.com, devicetree-discuss@lists.ozlabs.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
linux-usb@vger.kernel.org
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Subject: [PATCH v7 4/7] drivers: usb: twl6030: Add dt support for twl6030 usb
Date: Mon, 6 Aug 2012 18:37:57 +0530 [thread overview]
Message-ID: <1344258480-4304-5-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1344258480-4304-1-git-send-email-kishon@ti.com>
Add device tree support for twl6030 usb driver.
Update the Documentation with device tree binding information.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/usb/twlxxxx-usb.txt | 21 +++++++++++
drivers/usb/otg/twl6030-usb.c | 39 +++++++++++++-------
2 files changed, 47 insertions(+), 13 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
new file mode 100644
index 0000000..930f9ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
@@ -0,0 +1,21 @@
+USB COMPARATOR OF TWL CHIPS
+
+TWL6030 USB COMPARATOR
+ - compatible : Should be "ti,twl6030-usb"
+ - interrupts : Two interrupt numbers to the cpu should be specified. First
+ interrupt number is the otg interrupt number that raises ID interrupts when
+ the controller has to act as host and the second interrupt number is the
+ usb interrupt number that raises VBUS interrupts when the controller has to
+ act as device
+ - usb-supply : phandle to the regulator device tree node. It should be vusb
+ if it is twl6030 or ldousb if it is twl6025 subclass.
+
+twl6030-usb {
+ compatible = "ti,twl6030-usb";
+ interrupts = < 4 10 >;
+};
+
+Board specific device node entry
+&twl6030-usb {
+ usb-supply = <&vusb>;
+};
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index 32525bb..fcadef7 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -105,7 +105,7 @@ struct twl6030_usb {
u8 asleep;
bool irq_enabled;
bool vbus_enable;
- unsigned long features;
+ const char *regulator;
};
#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
@@ -153,13 +153,6 @@ static int twl6030_start_srp(struct phy_companion *comparator)
static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
{
- char *regulator_name;
-
- if (twl->features & TWL6025_SUBCLASS)
- regulator_name = "ldousb";
- else
- regulator_name = "vusb";
-
/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
@@ -169,7 +162,7 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
/* Program MISC2 register and set bit VUSB_IN_VBAT */
twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
- twl->usb3v3 = regulator_get(twl->dev, regulator_name);
+ twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
if (IS_ERR(twl->usb3v3))
return -ENODEV;
@@ -322,9 +315,9 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
u32 ret;
struct twl6030_usb *twl;
int status, err;
- struct twl4030_usb_data *pdata;
- struct device *dev = &pdev->dev;
- pdata = dev->platform_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct twl4030_usb_data *pdata = dev->platform_data;
twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
if (!twl)
@@ -333,7 +326,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
twl->dev = &pdev->dev;
twl->irq1 = platform_get_irq(pdev, 0);
twl->irq2 = platform_get_irq(pdev, 1);
- twl->features = pdata->features;
twl->linkstat = OMAP_MUSB_UNKNOWN;
twl->comparator.set_vbus = twl6030_set_vbus;
@@ -345,6 +337,18 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
+ if (np) {
+ twl->regulator = "usb";
+ } else if (pdata) {
+ if (pdata->features & TWL6025_SUBCLASS)
+ twl->regulator = "ldousb";
+ else
+ twl->regulator = "vusb";
+ } else {
+ dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
+ return -EINVAL;
+ }
+
/* init spinlock for workqueue */
spin_lock_init(&twl->lock);
@@ -406,12 +410,21 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id twl6030_usb_id_table[] = {
+ { .compatible = "ti,twl6030-usb" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
+#endif
+
static struct platform_driver twl6030_usb_driver = {
.probe = twl6030_usb_probe,
.remove = __exit_p(twl6030_usb_remove),
.driver = {
.name = "twl6030_usb",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(twl6030_usb_id_table),
},
};
--
1.7.9.5
next prev parent reply other threads:[~2012-08-06 13:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-06 13:07 [PATCH v7 0/7] omap: musb: Add device tree support Kishon Vijay Abraham I
[not found] ` <1344258480-4304-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2012-08-06 13:07 ` [PATCH v7 1/7] drivers: usb: phy: add a new driver for omap usb2 phy Kishon Vijay Abraham I
[not found] ` <1344258480-4304-2-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2012-09-06 12:15 ` ABRAHAM, KISHON VIJAY
[not found] ` <CAAe_U6KBNZpT03xATmPTNTgxm5hj+wJdsShdnm08EmF4Q=hTCw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2012-09-06 13:03 ` Arnd Bergmann
[not found] ` <201209061303.02454.arnd-r2nGTMty4D4@public.gmane.org>
2012-09-06 13:16 ` Felipe Balbi
2012-08-06 13:07 ` [PATCH v7 3/7] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2 Kishon Vijay Abraham I
2012-08-06 13:07 ` [PATCH v7 5/7] drivers: usb: twl4030: Add device tree support for twl4030 usb Kishon Vijay Abraham I
2012-08-06 13:07 ` [PATCH v7 2/7] arm: omap: hwmod: add a new addr space in otg for writing to control module Kishon Vijay Abraham I
2012-08-06 13:07 ` Kishon Vijay Abraham I [this message]
2012-08-06 13:07 ` [PATCH v7 6/7] drivers: usb: musb: Add device tree support for omap musb glue Kishon Vijay Abraham I
2012-08-06 13:08 ` [PATCH v7 7/7] arm: omap: phy: remove unused functions from omap-phy-internal.c Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344258480-4304-5-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=rnayak@ti.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).