From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>, Tony Lindgren <tony@atomide.com>
Cc: Steve Sakoman <steve@sakoman.com>,
Anuj Aggarwal <anuj.aggarwal@ti.com>,
Benoit Cousson <b-cousson@ti.com>,
alsa-devel@alsa-project.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
devicetree-discuss@lists.ozlabs.org
Subject: [PATCH v2 0/4] ASoC machine driver for simple SoC with twl4030
Date: Tue, 14 Aug 2012 12:07:55 +0300 [thread overview]
Message-ID: <1344935279-32364-1-git-send-email-peter.ujfalusi@ti.com> (raw)
Hello,
Changes since v1:
- Card name for cm-t35 is "cm-t3x"
- Added Ack from Tony for the OMAP patch
- Codec sysclock no longer needed by the machine driver
The codec itself must know the mclk since it needs it for initial
configuration and also in case only the vibra functionality is used.
The codec driver ignores the machine driver provided clock, it always uses the
mclk freq it got from the MFD core driver.
Intro mail from v1:
Create new unified ASoC machine driver (with DT support) for boards using simple
configuration for audio and using the twl4030 codec.
This driver will replace the following machine drivers (since they are basically
the same):
igep0020, omap3beagle, omap3evm and overo.
This series will switch the boards I can identify to use the new unified ASoC
machine driver.
Changes under arch/arm/mach-omap2/ are trivial, I don't expect merge issues
later. If it is OK for the maintainers I would like this to go via audio tree
(with the McBSP and the twl4030-audio stack DT support).
The series has been tested on BeagleBoard (with the McBSP and twl4030-audio DT
support).
Regards,
Peter
---
Peter Ujfalusi (4):
ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030
codec
ARM: OMAP: twl-common: Add helper function to register the
omap-twl4030 audio driver
ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for
selected boards
ASoC: Remove obsolete OMAP3 machine drivers
.../devicetree/bindings/sound/omap-twl4030.txt | 17 ++
arch/arm/mach-omap2/board-cm-t35.c | 1 +
arch/arm/mach-omap2/board-devkit8000.c | 1 +
arch/arm/mach-omap2/board-igep0020.c | 1 +
arch/arm/mach-omap2/board-omap3beagle.c | 1 +
arch/arm/mach-omap2/board-omap3evm.c | 1 +
arch/arm/mach-omap2/board-overo.c | 1 +
arch/arm/mach-omap2/twl-common.c | 27 +++
arch/arm/mach-omap2/twl-common.h | 2 +
include/linux/platform_data/omap-twl4030.h | 32 ++++
sound/soc/omap/Kconfig | 48 ++----
sound/soc/omap/Makefile | 10 +-
sound/soc/omap/igep0020.c | 120 -------------
sound/soc/omap/omap-twl4030.c | 188 ++++++++++++++++++++
sound/soc/omap/omap3beagle.c | 150 ----------------
sound/soc/omap/omap3evm.c | 118 ------------
sound/soc/omap/overo.c | 122 -------------
17 files changed, 287 insertions(+), 553 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/omap-twl4030.txt
create mode 100644 include/linux/platform_data/omap-twl4030.h
delete mode 100644 sound/soc/omap/igep0020.c
create mode 100644 sound/soc/omap/omap-twl4030.c
delete mode 100644 sound/soc/omap/omap3beagle.c
delete mode 100644 sound/soc/omap/omap3evm.c
delete mode 100644 sound/soc/omap/overo.c
--
1.7.8.6
next reply other threads:[~2012-08-14 9:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 9:07 Peter Ujfalusi [this message]
2012-08-14 9:07 ` [PATCH v2 1/4] ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030 codec Peter Ujfalusi
2012-08-14 9:07 ` [PATCH v2 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver Peter Ujfalusi
2012-08-14 9:07 ` [PATCH v2 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards Peter Ujfalusi
2012-08-16 6:21 ` Igor Grinberg
2012-08-14 9:07 ` [PATCH v2 4/4] ASoC: Remove obsolete OMAP3 machine drivers Peter Ujfalusi
2012-08-15 16:10 ` [PATCH v2 0/4] ASoC machine driver for simple SoC with twl4030 Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344935279-32364-1-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=anuj.aggarwal@ti.com \
--cc=b-cousson@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=steve@sakoman.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).