From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ujfalusi Subject: [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver Date: Thu, 16 Aug 2012 15:13:12 +0300 Message-ID: <1345119195-7490-1-git-send-email-peter.ujfalusi@ti.com> Return-path: Sender: linux-omap-owner@vger.kernel.org To: Samuel Ortiz , Grant Likely , Linus Walleij Cc: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, peter.ujfalusi@ti.com List-Id: devicetree@vger.kernel.org Hello, Changes since v1: - Removed the ti,use-gpo property from DT bindings - Register the GPO driver if we booted with DT blob or in legacy if the pdata for the GPO driver is present - DT binding Documentation update The Documentation update has reference to the twl6040.dtsi file which will be created to hold the common/static properties for the twl6040. To avoid cross tree merge issues later I have only included the Documentation update to this series and I will send the actual .dtsi/.dts changes via linux-omap. If this is not a problem. The dependencies for this series are in mainline and I think this series can go via GPIO if Samuel agrees with the changes. Intro mail from v1: The following series adds support for the GPO (General Purpose Output) on the twl6040/41 audio chip. The series has been tested on SDP4430, compile tested for x86_64 and x86_32 bit to be sure it does not introduce build breakage. Regards, Peter --- Peter Ujfalusi (3): mfd: twl6040: Fix GPO mask mfd: twl6040: Add twl6040-gpio child gpio: Add basic support for TWL6040 GPOs Documentation/devicetree/bindings/mfd/twl6040.txt | 9 +- drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-twl6040.c | 137 +++++++++++++++++++++ drivers/mfd/twl6040-core.c | 15 +++ include/linux/mfd/twl6040.h | 11 ++- 6 files changed, 175 insertions(+), 5 deletions(-) create mode 100644 drivers/gpio/gpio-twl6040.c -- 1.7.8.6