From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
b-cousson-l0cyMroinI0@public.gmane.org,
rnayak-l0cyMroinI0@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org
Cc: ohad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org,
Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>,
myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org
Subject: [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver
Date: Wed, 22 Aug 2012 14:10:01 +0530 [thread overview]
Message-ID: <1345624803-16379-1-git-send-email-kishon@ti.com> (raw)
This patch series has been lying here for long. If no one has any
comments on this patch series, can someone pick it up?
This patch series is done as a preparatory step for adding phy drivers
for dwc3 and musb.
This series adds a new driver for ocp2scp (only dt) to which phy
drivers are connected.
Since currently there is no generic way to create a child device along
with doing a pm_runtime_enable (the exact requirement for ocp2scp), I'm
creating a separate driver for ocp2scp.
Changes from v3:
No functional changes. Fixed few comments on filling *module* details.
Changes from v2:
Fixed Felipe's comments to avoid using arch_initcall and make dependent
drivers return -EPROBE_DEFER case this isn't ready yet.
Changes from v1:
Fixed Sergei's comments to remove the address in the node name of ocp2scp
since the ocp2scp node doesn't have a reg property.
Changes from [RFC PATCH v2 0/2] omap: add ocp2scp as a misc driver:
Created a new folder drivers/bus and moved ocp2scp driver from misc to
drivers/bus.
This patch was developed and tested on
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
Kishon Vijay Abraham I (2):
drivers: bus: add a new driver for omap-ocp2scp
arm/dts: omap4: Add ocp2scp data
.../devicetree/bindings/bus/omap-ocp2scp.txt | 10 +++
arch/arm/boot/dts/omap4.dtsi | 8 ++
drivers/Kconfig | 2 +
drivers/Makefile | 2 +
drivers/bus/Kconfig | 15 ++++
drivers/bus/Makefile | 5 ++
drivers/bus/omap-ocp2scp.c | 88 ++++++++++++++++++++
7 files changed, 130 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
create mode 100644 drivers/bus/Kconfig
create mode 100644 drivers/bus/Makefile
create mode 100644 drivers/bus/omap-ocp2scp.c
--
1.7.9.5
next reply other threads:[~2012-08-22 8:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-22 8:40 Kishon Vijay Abraham I [this message]
[not found] ` <1345624803-16379-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2012-08-22 8:40 ` [RESEND PATCH v4 1/2] drivers: bus: add a new driver for omap-ocp2scp Kishon Vijay Abraham I
2012-08-22 8:40 ` [RESEND PATCH v4 2/2] arm/dts: omap4: Add ocp2scp data Kishon Vijay Abraham I
2012-08-22 12:34 ` [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver Arnd Bergmann
2012-08-22 12:59 ` ABRAHAM, KISHON VIJAY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345624803-16379-1-git-send-email-kishon@ti.com \
--to=kishon-l0cymroini0@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=b-cousson-l0cyMroinI0@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=ohad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org \
--cc=rnayak-l0cyMroinI0@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=rusty-8n+1lVoiYb80n/F98K4Iww@public.gmane.org \
--cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).