From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnd Bergmann Subject: Re: [PATCH v2 0/8] arm: Add Artpec-6 SoC Date: Thu, 11 Feb 2016 15:17:30 +0100 Message-ID: <13460858.PmVpFaRWcp@wuerfel> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: linux-arm-kernel@lists.infradead.org Cc: Lars Persson , devicetree@vger.kernel.org, linux-clk@vger.kernel.org, mark.rutland@arm.com, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, Lars Persson , linux-kernel@vger.kernel.org, robh+dt@kernel.org, galak@codeaurora.org List-Id: devicetree@vger.kernel.org On Thursday 11 February 2016 15:04:34 Lars Persson wrote: > Basic support for the Axis Artpec-6 ARM SoC. Timers, interrupts, UARTs and > ethernet are wired up. > > Changes since v1: > - Corrected bindings for axis,artpec6-pll1-clock. > - Moved the uart aliases to the board dts. > - Kconfig cleanup. > - Added a device tree binding for the dma configuration. > - Added CONFIG_SYNOPSYS_DWC_ETH_QOS to multi_v7_defconfig. > - Added binding documentation for axis,artpec6-dev-board. > > Lars Persson (8): > clk: add device tree binding for artpec-6 pll1 clock > clk: add artpec-6 pll1 clock driver > arm: add device-tree SoC bindings for Axis Artpec-6 > arm: dts: add Artpec-6 SoC dtsi file > arm: dts: add Artpec-6 development board dts > arm: initial machine port for artpec-6 SoC > arm: multi_v7_defconfig: add MACH_ARTPEC6 > arm: mach-artpec: add entry to MAINTAINERS Looks good except for the one issue I pointed out in patch 3 (and also 6). Once that is resolved, please submit the new platform for inclusion by sending it to arm@kernel.org. The first two patches should get merged through the drivers/clk maintainer tree, please submit them separately there. Arnd