From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sachin Kamat Subject: [PATCH] dt: Fix incorrect reference in gpio-led documentation Date: Wed, 29 Aug 2012 13:40:46 +0530 Message-ID: <1346227846-17248-1-git-send-email-sachin.kamat@linaro.org> Return-path: Sender: linux-doc-owner@vger.kernel.org To: devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org Cc: grant.likely@secretlab.ca, rob.herring@calxeda.com, rob@landley.net, sachin.kamat@linaro.org, patches@linaro.org List-Id: devicetree@vger.kernel.org Path to gpio.txt (dt) document was broken. Signed-off-by: Sachin Kamat --- Documentation/devicetree/bindings/gpio/led.txt | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index 9bb308a..edc83c1 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED. LED sub-node properties: - gpios : Should specify the LED's GPIO, see "gpios property" in - Documentation/devicetree/gpio.txt. Active low LEDs should be + Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). -- 1.7.4.1