From: Ravi Babu <ravibabu@ti.com>
To: linux-usb@vger.kernel.org
Cc: linux-omap@vger.kernel.org, balbi@ti.com,
grant.likely@secretlab.ca, devicetree-discuss@lists.ozlabs.org,
tony@atomide.com, ajayguptaj@gmail.com
Subject: [PATCH v8 02/13] usb: musb: dsps: enable phy control for am335x
Date: Thu, 30 Aug 2012 16:20:14 +0530 [thread overview]
Message-ID: <1346323825-24385-3-git-send-email-ravibabu@ti.com> (raw)
In-Reply-To: <1346323825-24385-1-git-send-email-ravibabu@ti.com>
From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Enabled the phy control logic for am335x also based on usbss
revision register.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
---
arch/arm/plat-omap/include/plat/usb.h | 1 +
drivers/usb/musb/musb_dsps.c | 17 +++++++++++------
2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index c2aa4ae..6459b10 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -121,6 +121,7 @@ extern void am35x_set_mode(u8 musb_mode);
/* TI81XX specific definitions */
#define MUSB_USBSS_REV_816X 0x9
#define MUSB_USBSS_REV_814X 0xb
+#define MUSB_USBSS_REV_33XX 0xd
/* TI816X PHY controls bits */
#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 960258d..e62fa05 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -141,16 +141,21 @@ static void musb_dsps_phy_control(struct dsps_glue *glue, u8 on)
if (glue->usbss_rev == MUSB_USBSS_REV_816X) {
usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
- } else if (glue->usbss_rev == MUSB_USBSS_REV_814X) {
- usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN
- | USBPHY_DPINPUT | USBPHY_DMINPUT);
- usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN
- | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL);
+ } else if (glue->usbss_rev == MUSB_USBSS_REV_814X ||
+ glue->usbss_rev == MUSB_USBSS_REV_33XX) {
+ usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
+ usbphycfg |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
+ if (glue->usbss_rev == MUSB_USBSS_REV_814X) {
+ usbphycfg &= ~(USBPHY_DPINPUT | USBPHY_DMINPUT);
+ usbphycfg |= USBPHY_DPOPBUFCTL
+ | USBPHY_DMOPBUFCTL;
+ }
}
} else {
if (glue->usbss_rev == MUSB_USBSS_REV_816X)
usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
- else if (glue->usbss_rev == MUSB_USBSS_REV_814X)
+ else if (glue->usbss_rev == MUSB_USBSS_REV_814X ||
+ glue->usbss_rev == MUSB_USBSS_REV_33XX)
usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
}
__raw_writel(usbphycfg, glue->usb_ctrl);
--
1.7.0.4
next prev parent reply other threads:[~2012-08-30 10:50 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-30 10:50 [PATCH v8 00/13] usb: musb: adding multi instance support Ravi Babu
2012-08-30 10:50 ` [PATCH v8 01/13] usb: musb: dsps: add phy control logic to glue Ravi Babu
2012-08-30 10:50 ` Ravi Babu [this message]
[not found] ` <1346323825-24385-1-git-send-email-ravibabu-l0cyMroinI0@public.gmane.org>
2012-08-30 10:50 ` [PATCH v8 03/13] usb: musb: add musb_ida for multi instance support Ravi Babu
2012-08-30 10:50 ` [PATCH v8 05/13] usb: musb: am335x: add support for dual instance Ravi Babu
2012-08-30 10:50 ` [PATCH v8 06/13] usb: otg: nop: add support for multiple tranceiver Ravi Babu
2012-08-30 10:50 ` [PATCH v8 09/13] arm/dts: am33xx: add dt data for usb nop phy Ravi Babu
2012-08-30 10:50 ` [PATCH v8 10/13] usb: musb: dsps: remove explicit NOP device creation Ravi Babu
2012-08-30 10:50 ` [PATCH v8 11/13] usb: musb: dsps: get the PHY using phandle api Ravi Babu
2012-08-30 10:50 ` [PATCH v8 04/13] usb: musb: kill global and static for multi instance Ravi Babu
2012-08-30 10:50 ` [PATCH v8 07/13] usb: musb: dsps: add dt support Ravi Babu
2012-08-30 10:50 ` [PATCH v8 08/13] arm/dts: am33xx: Add dt data for usbss Ravi Babu
[not found] ` <1346323825-24385-9-git-send-email-ravibabu-l0cyMroinI0@public.gmane.org>
2012-08-30 11:39 ` Sergei Shtylyov
[not found] ` <503F50FC.5040200-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2012-08-31 9:54 ` Felipe Balbi
2012-08-31 10:01 ` B, Ravi
2012-08-31 10:11 ` ABRAHAM, KISHON VIJAY
2012-08-31 10:16 ` B, Ravi
2012-08-30 10:50 ` [PATCH v8 12/13] arm/dts: am33xx: add phy phandle to usbss Ravi Babu
2012-08-30 10:50 ` [PATCH v8 13/13] usb: otg: nop: add dt support Ravi Babu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346323825-24385-3-git-send-email-ravibabu@ti.com \
--to=ravibabu@ti.com \
--cc=ajayguptaj@gmail.com \
--cc=balbi@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).