From: Ravi Babu <ravibabu-l0cyMroinI0@public.gmane.org>
To: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
ajayguptaj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: [PATCH v8 06/13] usb: otg: nop: add support for multiple tranceiver
Date: Thu, 30 Aug 2012 16:20:18 +0530 [thread overview]
Message-ID: <1346323825-24385-7-git-send-email-ravibabu@ti.com> (raw)
In-Reply-To: <1346323825-24385-1-git-send-email-ravibabu-l0cyMroinI0@public.gmane.org>
From: Santhapuri, Damodar <damodar.santhapuri-l0cyMroinI0@public.gmane.org>
Currently we have one single nop transceiver support as same is
defined as a global variable in drivers/usb/otg/nop-usb-xceiv.c.
This need to be changed to support multiple otg controller each
using nop transceiver on a platform such as am335x.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta-l0cyMroinI0@public.gmane.org>
Signed-off-by: Ravi Babu <ravibabu-l0cyMroinI0@public.gmane.org>
Signed-off-by: Santhapuri, Damodar <damodar.santhapuri-l0cyMroinI0@public.gmane.org>
Signed-off-by: Ravi Babu <ravibabu-l0cyMroinI0@public.gmane.org>
---
drivers/usb/musb/am35x.c | 2 +-
drivers/usb/musb/blackfin.c | 2 +-
drivers/usb/musb/da8xx.c | 2 +-
drivers/usb/musb/davinci.c | 4 +-
drivers/usb/musb/musb_dsps.c | 8 +++---
drivers/usb/musb/tusb6010.c | 4 +-
drivers/usb/otg/nop-usb-xceiv.c | 54 ++++++++++++++++++++++++++++++++-----
include/linux/usb/nop-usb-xceiv.h | 4 +-
8 files changed, 60 insertions(+), 20 deletions(-)
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 457f25e..e3099fc 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -399,7 +399,7 @@ static int am35x_musb_exit(struct musb *musb)
data->set_phy_power(0);
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
+ usb_nop_xceiv_unregister(musb->xceiv);
return 0;
}
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index e8cff9b..32b4fe4 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -427,7 +427,7 @@ static int bfin_musb_exit(struct musb *musb)
gpio_free(musb->config->gpio_vrsel);
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
+ usb_nop_xceiv_unregister(musb->xceiv);
return 0;
}
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index ce11d20..f86a1c7 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -451,7 +451,7 @@ static int da8xx_musb_exit(struct musb *musb)
phy_off();
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
+ usb_nop_xceiv_unregister(musb->xceiv);
return 0;
}
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 606bfd0..e12d20a 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -437,7 +437,7 @@ static int davinci_musb_init(struct musb *musb)
fail:
usb_put_phy(musb->xceiv);
unregister:
- usb_nop_xceiv_unregister();
+ usb_nop_xceiv_unregister(musb->xceiv);
return -ENODEV;
}
@@ -485,7 +485,7 @@ static int davinci_musb_exit(struct musb *musb)
phy_off();
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
+ usb_nop_xceiv_unregister(musb->xceiv);
return 0;
}
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index f883c25..25e395b 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -413,7 +413,7 @@ static int dsps_musb_init(struct musb *musb)
/* mentor core register starts at offset of 0x400 from musb base */
musb->mregs += wrp->musb_core_offset;
- /* NOP driver needs change if supporting dual instance */
+ /* Register NOP driver */
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
@@ -447,7 +447,7 @@ static int dsps_musb_init(struct musb *musb)
return 0;
err0:
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
+ usb_nop_xceiv_unregister(musb->xceiv);
return status;
}
@@ -462,9 +462,9 @@ static int dsps_musb_exit(struct musb *musb)
/* Shutdown the on-chip PHY and its PLL. */
musb_dsps_phy_control(glue, pdev->id, 0);
- /* NOP driver needs change if supporting dual instance */
+ /* Unregister NOP driver */
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
+ usb_nop_xceiv_unregister(musb->xceiv);
return 0;
}
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index dc4d75e..71c4778 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1117,7 +1117,7 @@ done:
iounmap(sync);
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
+ usb_nop_xceiv_unregister(musb->xceiv);
}
return ret;
}
@@ -1133,7 +1133,7 @@ static int tusb_musb_exit(struct musb *musb)
iounmap(musb->sync_va);
usb_put_phy(musb->xceiv);
- usb_nop_xceiv_unregister();
+ usb_nop_xceiv_unregister(musb->xceiv);
return 0;
}
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index e52e35e..7e0dba3 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -32,30 +32,69 @@
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/slab.h>
+#include <linux/idr.h>
struct nop_usb_xceiv {
struct usb_phy phy;
struct device *dev;
+ struct platform_device *pd;
};
-static struct platform_device *pd;
+static DEFINE_IDA(nop_ida);
-void usb_nop_xceiv_register(void)
+static int nop_get_id(gfp_t gfp_mask)
{
- if (pd)
+ int ret, id;
+
+ ret = ida_pre_get(&nop_ida, gfp_mask);
+ if (!ret) {
+ pr_err("failed to reserve resource for id\n");
+ return -ENOMEM;
+ }
+
+ ret = ida_get_new(&nop_ida, &id);
+ if (ret < 0) {
+ pr_err("failed to allocate a new id\n");
+ return ret;
+ }
+
+ return id;
+}
+
+static void nop_put_id(int id)
+{
+
+ pr_debug("removing id %d\n", id);
+ ida_remove(&nop_ida, id);
+}
+
+void usb_nop_xceiv_register()
+{
+ struct platform_device *pd;
+ int id;
+
+ id = nop_get_id(GFP_KERNEL);
+ if (id < 0) {
+ pr_err("failed to allocate a new id\n");
return;
- pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0);
+ }
+
+ pd = platform_device_register_simple("nop_usb_xceiv", id, NULL, 0);
if (!pd) {
- printk(KERN_ERR "Unable to register usb nop transceiver\n");
+ pr_err("Unable to register usb nop transceiver\n");
return;
}
}
EXPORT_SYMBOL(usb_nop_xceiv_register);
-void usb_nop_xceiv_unregister(void)
+void usb_nop_xceiv_unregister(struct usb_phy *phy)
{
+ struct nop_usb_xceiv *nop = container_of(phy,
+ struct nop_usb_xceiv, phy);
+ struct platform_device *pd = nop->pd;
+
platform_device_unregister(pd);
- pd = NULL;
+ nop_put_id(pd->id);
}
EXPORT_SYMBOL(usb_nop_xceiv_unregister);
@@ -113,6 +152,7 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
if (pdata)
type = pdata->type;
+ nop->pd = pdev;
nop->dev = &pdev->dev;
nop->phy.dev = nop->dev;
nop->phy.label = "nop-xceiv";
diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h
index 28884c7..c12fc10 100644
--- a/include/linux/usb/nop-usb-xceiv.h
+++ b/include/linux/usb/nop-usb-xceiv.h
@@ -10,13 +10,13 @@ struct nop_usb_xceiv_platform_data {
#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
/* sometimes transceivers are accessed only through e.g. ULPI */
extern void usb_nop_xceiv_register(void);
-extern void usb_nop_xceiv_unregister(void);
+extern void usb_nop_xceiv_unregister(struct usb_phy *);
#else
static inline void usb_nop_xceiv_register(void)
{
}
-static inline void usb_nop_xceiv_unregister(void)
+static inline void usb_nop_xceiv_unregister(struct usb_phy *phy)
{
}
#endif
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-08-30 10:50 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-30 10:50 [PATCH v8 00/13] usb: musb: adding multi instance support Ravi Babu
2012-08-30 10:50 ` [PATCH v8 01/13] usb: musb: dsps: add phy control logic to glue Ravi Babu
2012-08-30 10:50 ` [PATCH v8 02/13] usb: musb: dsps: enable phy control for am335x Ravi Babu
2012-08-30 10:50 ` [PATCH v8 04/13] usb: musb: kill global and static for multi instance Ravi Babu
[not found] ` <1346323825-24385-1-git-send-email-ravibabu-l0cyMroinI0@public.gmane.org>
2012-08-30 10:50 ` [PATCH v8 03/13] usb: musb: add musb_ida for multi instance support Ravi Babu
2012-08-30 10:50 ` [PATCH v8 05/13] usb: musb: am335x: add support for dual instance Ravi Babu
2012-08-30 10:50 ` Ravi Babu [this message]
2012-08-30 10:50 ` [PATCH v8 09/13] arm/dts: am33xx: add dt data for usb nop phy Ravi Babu
2012-08-30 10:50 ` [PATCH v8 10/13] usb: musb: dsps: remove explicit NOP device creation Ravi Babu
2012-08-30 10:50 ` [PATCH v8 11/13] usb: musb: dsps: get the PHY using phandle api Ravi Babu
2012-08-30 10:50 ` [PATCH v8 07/13] usb: musb: dsps: add dt support Ravi Babu
2012-08-30 10:50 ` [PATCH v8 08/13] arm/dts: am33xx: Add dt data for usbss Ravi Babu
[not found] ` <1346323825-24385-9-git-send-email-ravibabu-l0cyMroinI0@public.gmane.org>
2012-08-30 11:39 ` Sergei Shtylyov
[not found] ` <503F50FC.5040200-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2012-08-31 9:54 ` Felipe Balbi
2012-08-31 10:01 ` B, Ravi
2012-08-31 10:11 ` ABRAHAM, KISHON VIJAY
2012-08-31 10:16 ` B, Ravi
2012-08-30 10:50 ` [PATCH v8 12/13] arm/dts: am33xx: add phy phandle to usbss Ravi Babu
2012-08-30 10:50 ` [PATCH v8 13/13] usb: otg: nop: add dt support Ravi Babu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346323825-24385-7-git-send-email-ravibabu@ti.com \
--to=ravibabu-l0cymroini0@public.gmane.org \
--cc=ajayguptaj-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).