From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sachin Kamat Subject: [PATCH 1/2] ARM: dts: Use active low flag for gpio-keys on Origen Date: Fri, 31 Aug 2012 09:43:49 +0530 Message-ID: <1346386430-3619-1-git-send-email-sachin.kamat@linaro.org> Return-path: Sender: linux-samsung-soc-owner@vger.kernel.org To: devicetree-discuss@lists.ozlabs.org Cc: linux-samsung-soc@vger.kernel.org, grant.likely@secretlab.ca, rob.herring@calxeda.com, sachin.kamat@linaro.org, patches@linaro.org, Olof Johansson , Thomas Abraham List-Id: devicetree@vger.kernel.org Commit: f447ed8b31d (gpio: samsung: add flags specifier to device-tree binding) adds a flag to represent active low state for gpio line. Since gpio-keys on Origen board are active low, using this flag to represent the same. Cc: Olof Johansson Cc: Thomas Abraham Signed-off-by: Sachin Kamat --- arch/arm/boot/dts/exynos4210-origen.dts | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 0c49caa..c37edf0 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -62,31 +62,31 @@ up { label = "Up"; - gpios = <&gpx2 0 0 0 2>; + gpios = <&gpx2 0 0 0x10000 2>; linux,code = <103>; }; down { label = "Down"; - gpios = <&gpx2 1 0 0 2>; + gpios = <&gpx2 1 0 0x10000 2>; linux,code = <108>; }; back { label = "Back"; - gpios = <&gpx1 7 0 0 2>; + gpios = <&gpx1 7 0 0x10000 2>; linux,code = <158>; }; home { label = "Home"; - gpios = <&gpx1 6 0 0 2>; + gpios = <&gpx1 6 0 0x10000 2>; linux,code = <102>; }; menu { label = "Menu"; - gpios = <&gpx1 5 0 0 2>; + gpios = <&gpx1 5 0 0x10000 2>; linux,code = <139>; }; }; -- 1.7.4.1