From mboxrd@z Thu Jan 1 00:00:00 1970 From: Omar Ramirez Luna Subject: [PATCH v2 0/9] OMAP: iommu: hwmod, reset handling and runtime PM Date: Wed, 12 Sep 2012 14:45:43 -0500 Message-ID: <1347479152-588-1-git-send-email-omar.luna@linaro.org> Return-path: Sender: linux-doc-owner@vger.kernel.org To: Tony Lindgren , Benoit Cousson , Ohad Ben-Cohen , Joerg Roedel Cc: Russell King , Omar Ramirez Luna , Rajendra Nayak , Peter Ujfalusi , Laurent Pinchart , devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org List-Id: devicetree@vger.kernel.org These patches are needed for remoteproc to work on OMAP4. Introduced iommu hwmod support for OMAP3 (iva, isp) and OMAP4 (ipu, dsp), along with the corresponding runtime PM and routines to deassert reset lines, enable/disable clocks and configure sysc registers. Due to compatibility an ifdef needs to be propagated (previously on iommu resource info) to hwmod data in OMAP3, so users of iommu and tidspbridge can avoid issues of two modules managing mmu data/irqs/resets; this until tidspbridge can be safely migrated to iommu framework. Although IOMMU hwmod patches were already submitted in the past, this series adds few more changes, like: - New reset handling, based on a series that was accepted but *NOT YET* in mainline. http://www.mail-archive.com/linux-omap@vger.kernel.org/msg73111.html http://www.mail-archive.com/linux-omap@vger.kernel.org/msg75105.html - Fix for compile break if IOMMU_API is not selected. - Save and restore context code rework. - Device tree bindings for OMAP3 and OMAP4. Previous work can be found at: [v1] http://www.mail-archive.com/linux-omap@vger.kernel.org/msg70447.html [old iteration without reset, save/restore and device tree] http://www.mail-archive.com/linux-omap@vger.kernel.org/msg60133.html Omar Ramirez Luna (9): ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3/4: iommu: migrate to hwmod framework ARM: OMAP3/4: iommu: adapt to runtime pm ARM: OMAP: iommu: pm runtime save and restore context ARM: OMAP: iommu: optimize save and restore routines ARM: OMAP: iommu: add device tree support arm/dts: OMAP3/4: Add iommu nodes .../devicetree/bindings/arm/omap/iommu.txt | 10 ++ arch/arm/boot/dts/omap3.dtsi | 12 +- arch/arm/boot/dts/omap4.dtsi | 17 +- arch/arm/mach-omap2/devices.c | 2 +- arch/arm/mach-omap2/iommu2.c | 74 +++------ arch/arm/mach-omap2/omap-iommu.c | 168 +++++--------------- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 121 ++++++++++++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 136 +++++++++++++++- arch/arm/plat-omap/include/plat/iommu.h | 35 +++- arch/arm/plat-omap/include/plat/iommu2.h | 4 - drivers/iommu/omap-iommu.c | 163 +++++++++++++++---- 11 files changed, 511 insertions(+), 231 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/omap/iommu.txt -- 1.7.9.5