From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: linux-arm-kernel@lists.infradead.org
Cc: devicetree-discuss@lists.ozlabs.org,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Subject: [PATCH 01/16] ARM: at91: fix missing #interrupt-cells on gpio-controller
Date: Mon, 17 Sep 2012 17:26:58 +0200 [thread overview]
Message-ID: <1347895633-1763-1-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20120917140423.GA17667@game.jcrosoft.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 3 +++
arch/arm/boot/dts/at91sam9263.dtsi | 5 +++++
arch/arm/boot/dts/at91sam9g45.dtsi | 5 +++++
arch/arm/boot/dts/at91sam9n12.dtsi | 4 ++++
arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++++
5 files changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 66389c1..7c95f76 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -104,6 +104,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff600 {
@@ -113,6 +114,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff800 {
@@ -122,6 +124,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index b460d6c..195019b 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -95,6 +95,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff400 {
@@ -104,6 +105,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff600 {
@@ -113,6 +115,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioD: gpio@fffff800 {
@@ -122,6 +125,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioE: gpio@fffffa00 {
@@ -131,6 +135,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index bafa880..63751b1 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -113,6 +113,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff400 {
@@ -122,6 +123,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff600 {
@@ -131,6 +133,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioD: gpio@fffff800 {
@@ -140,6 +143,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioE: gpio@fffffa00 {
@@ -149,6 +153,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index bfac0df..ef9336a 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -107,6 +107,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff600 {
@@ -116,6 +117,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff800 {
@@ -125,6 +127,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioD: gpio@fffffa00 {
@@ -134,6 +137,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 4a18c39..8a387a8 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -115,6 +115,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff600 {
@@ -124,6 +125,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff800 {
@@ -133,6 +135,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioD: gpio@fffffa00 {
@@ -142,6 +145,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@fffff200 {
--
1.7.10.4
next parent reply other threads:[~2012-09-17 15:26 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20120917140423.GA17667@game.jcrosoft.org>
2012-09-17 15:26 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-09-17 15:26 ` [PATCH 02/16] arm: at91: use macro to declare soc boot data Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 03/16] ARM: at91: gpio: implement request Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <1347895633-1763-1-git-send-email-plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
2012-09-17 15:27 ` [PATCH 04/16] at91: regroup gpio and pinctrl under the same ranges Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 05/16] arm: at91: at91sam9x5: fix gpio number per bank Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 06/16] ARM: at91: add dummies pinctrl for non dt platform Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 07/16] ARM: at91: add pinctrl support Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <1347895633-1763-7-git-send-email-plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
2012-09-25 14:59 ` Nicolas Ferre
2012-09-17 15:27 ` [PATCH 08/16] arm: at91: dt: at91sam9 " Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 09/16] arm: at91: dt: at91sam9 add serial " Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 10/16] tty: atmel_serial: add " Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 11/16] arm: at91: dt: sam9m10g45ek: use rts/cts pinctrl group for uart1 Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 12/16] arm: at91: dt: sam9263ek: use rts/cts pinctrl group for uart0 Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 13/16] arm: at91: dt: sam9g20ek: use rts/cts/dtr/dsr/dcd/ri " Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 14/16] MTD: atmel nand: fix gpio missing request Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 15/16] arm: at91: dt: at91sam9 add nand pinctrl support Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 15:27 ` [PATCH 16/16] MTD: atmel_nand: add pinctrl consumer support Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347895633-1763-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).