* [PATCH 0/2] ARM/dts: OMAP4: Enable twl6040 GPO functionality
@ 2012-09-19 9:43 Peter Ujfalusi
[not found] ` <1348047785-1681-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
2012-09-19 9:43 ` [PATCH 2/2] ARM/dts: omap4-panda: " Peter Ujfalusi
0 siblings, 2 replies; 3+ messages in thread
From: Peter Ujfalusi @ 2012-09-19 9:43 UTC (permalink / raw)
To: Tony Lindgren
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Samuel Ortiz
Hello,
The following two patch is needed for the twl6040 GPO driver (going via MFD
tree) to work correctly.
Regards,
Peter
---
Peter Ujfalusi (2):
ARM/dts: omap4-sdp: Enable GPO functionality for twl6040
ARM/dts: omap4-panda: Enable GPO functionality for twl6040
arch/arm/boot/dts/omap4-panda.dts | 3 +++
arch/arm/boot/dts/omap4-sdp.dts | 3 +++
2 files changed, 6 insertions(+)
--
1.7.12
^ permalink raw reply [flat|nested] 3+ messages in thread[parent not found: <1348047785-1681-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>]
* [PATCH 1/2] ARM/dts: omap4-sdp: Enable GPO functionality for twl6040
[not found] ` <1348047785-1681-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
@ 2012-09-19 9:43 ` Peter Ujfalusi
0 siblings, 0 replies; 3+ messages in thread
From: Peter Ujfalusi @ 2012-09-19 9:43 UTC (permalink / raw)
To: Tony Lindgren
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Samuel Ortiz
Add the needed properties for twl6040 so the GPO functionality can be used
by other drivers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/omap4-sdp.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 94a23b3..2c4fc1e 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -155,6 +155,9 @@
twl6040: twl@4b {
compatible = "ti,twl6040";
+ gpio-controller;
+ #gpio-cells = <1>;
+
reg = <0x4b>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
--
1.7.12
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM/dts: omap4-panda: Enable GPO functionality for twl6040
2012-09-19 9:43 [PATCH 0/2] ARM/dts: OMAP4: Enable twl6040 GPO functionality Peter Ujfalusi
[not found] ` <1348047785-1681-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
@ 2012-09-19 9:43 ` Peter Ujfalusi
1 sibling, 0 replies; 3+ messages in thread
From: Peter Ujfalusi @ 2012-09-19 9:43 UTC (permalink / raw)
To: Tony Lindgren
Cc: Benoit Cousson, Samuel Ortiz, linux-omap, linux-arm-kernel,
devicetree-discuss
Add the needed properties for twl6040 so the GPO functionality can be used
by other drivers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/omap4-panda.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 20b966e..94adabb 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -71,6 +71,9 @@
twl6040: twl@4b {
compatible = "ti,twl6040";
+ gpio-controller;
+ #gpio-cells = <1>;
+
reg = <0x4b>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
--
1.7.12
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-09-19 9:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-19 9:43 [PATCH 0/2] ARM/dts: OMAP4: Enable twl6040 GPO functionality Peter Ujfalusi
[not found] ` <1348047785-1681-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
2012-09-19 9:43 ` [PATCH 1/2] ARM/dts: omap4-sdp: Enable GPO functionality for twl6040 Peter Ujfalusi
2012-09-19 9:43 ` [PATCH 2/2] ARM/dts: omap4-panda: " Peter Ujfalusi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).