From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Subject: [PATCH] arm: fdt: Relocate fdt along with other data Date: Thu, 27 Sep 2012 18:41:55 -0700 Message-ID: <1348796515-29008-1-git-send-email-sjg@chromium.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de To: U-Boot Mailing List Cc: Devicetree Discuss , Jerry Van Baren List-Id: devicetree@vger.kernel.org Rather than leave the fdt down next to the code/data, we really should relocate it along with everything else. For CONFIG_OF_EMBED this happens automatically, but for CONFIG_OF_SEPARATE it does not. Add code to copy the fdt and point to the new copy after relocation. Signed-off-by: Simon Glass --- arch/arm/lib/board.c | 22 ++++++++++++++++++++++ 1 files changed, 22 insertions(+), 0 deletions(-) diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 109a1ac..6dca891 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -274,6 +274,8 @@ void board_init_f(ulong bootflag) #ifdef CONFIG_PRAM ulong reg; #endif + void *new_fdt = NULL; + size_t fdt_size = 0; bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); @@ -409,6 +411,22 @@ void board_init_f(ulong bootflag) debug("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); +#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL) + /* + * If the device tree is sitting immediate above our image then we + * must relocate it. If it is embedded in the data section, then it + * will be relocated with other data. + */ + if (gd->fdt_blob) { + fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32); + + addr_sp -= fdt_size; + new_fdt = (void *)addr_sp; + debug("Reserving %zu Bytes for FDT at: %08lx\n", + fdt_size, addr_sp); + } +#endif + /* setup stackpointer for exeptions */ gd->irq_sp = addr_sp; #ifdef CONFIG_USE_IRQ @@ -442,6 +460,10 @@ void board_init_f(ulong bootflag) gd->start_addr_sp = addr_sp; gd->reloc_off = addr - _TEXT_BASE; debug("relocation Offset is: %08lx\n", gd->reloc_off); + if (new_fdt) { + memcpy(new_fdt, gd->fdt_blob, fdt_size); + gd->fdt_blob = new_fdt; + } memcpy(id, (void *)gd, sizeof(gd_t)); relocate_code(addr_sp, id, addr); -- 1.7.7.3