Re: [PATCH v2 0/2] arm64: dts: allwinner: Add Tanix TX1 support

["Jernej Škrabec" <jernej.skrabec@gmail.com>]

Dne četrtek, 18. april 2024 ob 12:49:40 GMT +2 je Andre Przywara napisal(a):
> v2 just removes the premature OPP header inclusion, and adds tags,
> otherwise it's the same as the previous post. Based on sunxi/for-next.
> 
> ==================
> Tanix TX1 is a tiny TV box (60% of a credit card) with an Allwinner
> H313 SoC. This seems to be the same as the H616, just the "bad bin"
> version, limited to 1.3 GHz.
> The box has no Ethernet or SD card slot, which makes booting from it
> somewhat interesting: Pressing the hidden FEL button and using a USB-A
> to USB-A cable to upload code from a host PC is one way to run mainline.
> The box features a minimal set of peripherals: one USB port, 8 or 16GB
> of eMMC, an HDMI port and an (unsupported) SCI S9082H WiFi chip.
> 
> Patch 1 adds the DT binding for the board compatible, I refrained from
> using the H313 name here, since it seems to be functionally identical to
> the H616.
> Patch 2 adds the devicetree.
> 
> There is a blue and a red LED, both connected to the same GPIO pin, but
> with different polarities, so it's only either one of them enabled.
> I did not find a way to describe this in DT, so I omitted the red LED.
> 
> Please have a look!

Applied, thanks!

Best regards,
Jernej

> 
> Cheers,
> Andre
> 
> Changelog v1 .. v2:
> - add tags
> - remove premature opp.dtsi inclusion
> 
> Andre Przywara (2):
>   dt-bindings: arm: sunxi: document Tanix TX1 name
>   arm64: dts: allwinner: Add Tanix TX1 support
> 
>  .../devicetree/bindings/arm/sunxi.yaml        |   5 +
>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
>  .../dts/allwinner/sun50i-h313-tanix-tx1.dts   | 183 ++++++++++++++++++
>  3 files changed, 189 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
> 
>