From: Murali Karicheri <m-karicheri2@ti.com>
To: grant.likely@secretlab.ca, rob.herring@calxeda.com,
rob@landley.net, dwmw2@infradead.org,
artem.bityutskiy@linux.intel.com, hs@denx.de, nsekhar@ti.com,
mikedunn@newsguy.com, devicetree-discuss@lists.ozlabs.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mtd@lists.infradead.org, linux-keystone@list.ti.com
Cc: Murali Karicheri <m-karicheri2@ti.com>
Subject: [RESEND PATCH] mtd: davinci: add support for parition binding nodes
Date: Fri, 2 Nov 2012 10:22:41 -0400 [thread overview]
Message-ID: <1351866161-15516-1-git-send-email-m-karicheri2@ti.com> (raw)
Enhance the driver to support partition subnodes inside the nand
device bindings to describe partions on the nand device.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
---
.../devicetree/bindings/arm/davinci/nand.txt | 8 ++++++++
drivers/mtd/nand/davinci_nand.c | 13 ++++++++++---
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt
index e37241f..4746452 100644
--- a/Documentation/devicetree/bindings/arm/davinci/nand.txt
+++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt
@@ -23,6 +23,9 @@ Recommended properties :
- ti,davinci-nand-buswidth: buswidth 8 or 16
- ti,davinci-nand-use-bbt: use flash based bad block table support.
+nand device bindings may contain additional sub-nodes describing
+partitions of the address space. See partition.txt for more detail.
+
Example (enbw_cmc board):
aemif@60000000 {
compatible = "ti,davinci-aemif";
@@ -47,5 +50,10 @@ aemif@60000000 {
ti,davinci-ecc-mode = "hw";
ti,davinci-ecc-bits = <4>;
ti,davinci-nand-use-bbt;
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x7e80000>;
+ };
};
};
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index df1ab7d..321b053 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -821,9 +821,16 @@ syndrome_done:
if (ret < 0)
goto err_scan;
- ret = mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts,
- pdata->nr_parts);
-
+ if (pdata->parts)
+ ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
+ pdata->parts, pdata->nr_parts);
+ else {
+ struct mtd_part_parser_data ppdata;
+
+ ppdata.of_node = pdev->dev.of_node;
+ ret = mtd_device_parse_register(&info->mtd, NULL, &ppdata,
+ NULL, 0);
+ }
if (ret < 0)
goto err_scan;
--
1.7.9.5
next reply other threads:[~2012-11-02 14:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-02 14:22 Murali Karicheri [this message]
2012-11-15 13:15 ` [linux-keystone] [RESEND PATCH] mtd: davinci: add support for parition binding nodes Grant Likely
2012-11-15 13:50 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351866161-15516-1-git-send-email-m-karicheri2@ti.com \
--to=m-karicheri2@ti.com \
--cc=artem.bityutskiy@linux.intel.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dwmw2@infradead.org \
--cc=grant.likely@secretlab.ca \
--cc=hs@denx.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-keystone@list.ti.com \
--cc=linux-mtd@lists.infradead.org \
--cc=mikedunn@newsguy.com \
--cc=nsekhar@ti.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).