* [PATCH 10/20] x86: fdt: Create basic .dtsi file for coreboot
[not found] ` <1351978902-23719-1-git-send-email-sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
@ 2012-11-03 21:41 ` Simon Glass
0 siblings, 0 replies; only message in thread
From: Simon Glass @ 2012-11-03 21:41 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: Stefan Reinauer, Gabe Black, Graeme Russ, Devicetree Discuss
This contains just the minimum information for a coreboot-based board.
Signed-off-by: Stefan Reinauer <reinauer-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Gabe Black <gabeblack-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
arch/x86/dts/coreboot.dtsi | 16 ++++++++++++++++
arch/x86/dts/skeleton.dtsi | 13 +++++++++++++
2 files changed, 29 insertions(+), 0 deletions(-)
create mode 100644 arch/x86/dts/coreboot.dtsi
create mode 100644 arch/x86/dts/skeleton.dtsi
diff --git a/arch/x86/dts/coreboot.dtsi b/arch/x86/dts/coreboot.dtsi
new file mode 100644
index 0000000..4862a59
--- /dev/null
+++ b/arch/x86/dts/coreboot.dtsi
@@ -0,0 +1,16 @@
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ console = "/serial";
+ };
+
+ serial {
+ compatible = "ns16550";
+ reg-shift = <1>;
+ io-mapped = <1>;
+ multiplier = <1>;
+ baudrate = <115200>;
+ status = "disabled";
+ };
+};
diff --git a/arch/x86/dts/skeleton.dtsi b/arch/x86/dts/skeleton.dtsi
new file mode 100644
index 0000000..b41d241
--- /dev/null
+++ b/arch/x86/dts/skeleton.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value. The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+ aliases { };
+ memory { device_type = "memory"; reg = <0 0>; };
+};
--
1.7.7.3
^ permalink raw reply related [flat|nested] only message in thread