* [PATCH 01/10] ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 10:45 ` [PATCH 02/10] ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm AnilKumar Ch
` (9 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add pinmux configurations for gpio matrix keypad. In this patch, only
single named mode/state is added and these pins are configured during
pinctrl driver initialization.
Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 513284f..9199456 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -24,6 +24,21 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ am33xx_pinmux: pinmux@44e10800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&matrix_keypad_s0>;
+
+ matrix_keypad_s0: matrix_keypad_s0 {
+ pinctrl-single,pins = <
+ 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+ 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
+ 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */
+ 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */
+ 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */
+ >;
+ };
+ };
+
ocp {
uart1: serial@44e09000 {
status = "okay";
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 02/10] ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
2012-11-05 10:45 ` [PATCH 01/10] ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 10:45 ` [PATCH 03/10] ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM AnilKumar Ch
` (8 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add matrix keypad device tree data to am335x-evm by adding all
the necessary parameters like keymap, row & column gpios and etc.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 9199456..8076e66 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -110,6 +110,26 @@
regulator-name = "lis3_reg";
regulator-boot-on;
};
+
+ matrix_keypad: matrix_keypad@0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio2 25 0 /* Bank1, pin25 */
+ &gpio2 26 0 /* Bank1, pin26 */
+ &gpio2 27 0>; /* Bank1, pin27 */
+
+ col-gpios = <&gpio2 21 0 /* Bank1, pin21 */
+ &gpio2 22 0>; /* Bank1, pin22 */
+
+ linux,keymap = <0x0000008b /* MENU */
+ 0x0100009e /* BACK */
+ 0x02000069 /* LEFT */
+ 0x0001006a /* RIGHT */
+ 0x0101001c /* ENTER */
+ 0x0201006c>; /* DOWN */
+ };
};
/include/ "tps65910.dtsi"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 03/10] ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
2012-11-05 10:45 ` [PATCH 01/10] ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM AnilKumar Ch
2012-11-05 10:45 ` [PATCH 02/10] ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 10:45 ` [PATCH 04/10] ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm AnilKumar Ch
` (7 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add pinmux configurations for gpio volume keys. In this patch, only
single named mode/state is added and these pins are configured during
pinctrl driver initialization.
Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 8076e66..e087b87 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -26,7 +26,7 @@
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
- pinctrl-0 = <&matrix_keypad_s0>;
+ pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
@@ -37,6 +37,13 @@
0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */
>;
};
+
+ volume_keys_s0: volume_keys_s0 {
+ pinctrl-single,pins = <
+ 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */
+ 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */
+ >;
+ };
};
ocp {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 04/10] ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
` (2 preceding siblings ...)
2012-11-05 10:45 ` [PATCH 03/10] ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 10:45 ` [PATCH 05/10] ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE AnilKumar Ch
` (6 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add gpio based volume keys device tree data to am335x-evm by adding
all the required parameters like keycode, gpios and etc.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e087b87..9f65f17 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -137,6 +137,27 @@
0x0101001c /* ENTER */
0x0201006c>; /* DOWN */
};
+
+ gpio_keys: volume_keys@0 {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ switch@9 {
+ label = "volume-up";
+ linux,code = <115>;
+ gpios = <&gpio1 2 1>;
+ gpio-key,wakeup;
+ };
+
+ switch@10 {
+ label = "volume-down";
+ linux,code = <114>;
+ gpios = <&gpio1 3 1>;
+ gpio-key,wakeup;
+ };
+ };
};
/include/ "tps65910.dtsi"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 05/10] ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
` (3 preceding siblings ...)
2012-11-05 10:45 ` [PATCH 04/10] ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 10:45 ` [PATCH 06/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone AnilKumar Ch
` (5 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add pinmux configurations for gpio based user-keys to am335x-bone.
In this patch, only single named mode/state is added and these pins
are configured during pinctrl driver initialization.
Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-bone.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 6f9c48e..0bd0355 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -24,6 +24,20 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ am33xx_pinmux: pinmux@44e10800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ user_leds_s0: user_leds_s0 {
+ pinctrl-single,pins = <
+ 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+ 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+ 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+ 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+ >;
+ };
+ };
+
ocp {
uart1: serial@44e09000 {
status = "okay";
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 06/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
` (4 preceding siblings ...)
2012-11-05 10:45 ` [PATCH 05/10] ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 10:45 ` [PATCH 07/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK AnilKumar Ch
` (4 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add gpio-leds device tree data to am335x-bone device to enable gpio
based user-leds (USR0, USR1, USR2 and USR3) present on BeagleBone.
[koen@dominion.thruhere.net: led0, led1 suggested by koen]
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-bone.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 0bd0355..206c3eb 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -57,6 +57,36 @@
ti,system-power-controller;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led@2 {
+ label = "beaglebone:green:heartbeat";
+ gpios = <&gpio2 21 0>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "beaglebone:green:mmc0";
+ gpios = <&gpio2 22 0>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "beaglebone:green:usr2";
+ gpios = <&gpio2 23 0>;
+ default-state = "off";
+ };
+
+ led@5 {
+ label = "beaglebone:green:usr3";
+ gpios = <&gpio2 24 0>;
+ default-state = "off";
+ };
+ };
};
/include/ "tps65217.dtsi"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 07/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
` (5 preceding siblings ...)
2012-11-05 10:45 ` [PATCH 06/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 10:45 ` [PATCH 08/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk AnilKumar Ch
` (3 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add pinmux configurations for gpio based volume keys to am335x-evmsk.
In this patch, only single named mode/state is added and these pins
are configured during pinctrl driver initialization.
Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-evmsk.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 6f53879..659ec5b 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -30,6 +30,20 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ am33xx_pinmux: pinmux@44e10800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ user_leds_s0: user_leds_s0 {
+ pinctrl-single,pins = <
+ 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
+ 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
+ 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
+ 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+ >;
+ };
+ };
+
ocp {
uart1: serial@44e09000 {
status = "okay";
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 08/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
` (6 preceding siblings ...)
2012-11-05 10:45 ` [PATCH 07/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 10:45 ` [PATCH 09/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK AnilKumar Ch
` (2 subsequent siblings)
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add gpio-leds device tree data to am335x-evmsk device to enable gpio
based user-leds (USR0, USR1, USR2 and USR3) present on am335x starter
kit.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-evmsk.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 659ec5b..7262fa8 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -100,6 +100,36 @@
regulator-name = "lis3_reg";
regulator-boot-on;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "evmsk:green:usr0";
+ gpios = <&gpio2 4 0>;
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "evmsk:green:usr1";
+ gpios = <&gpio2 5 0>;
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "evmsk:green:mmc0";
+ gpios = <&gpio2 6 0>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "evmsk:green:heartbeat";
+ gpios = <&gpio2 7 0>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
};
/include/ "tps65910.dtsi"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 09/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
` (7 preceding siblings ...)
2012-11-05 10:45 ` [PATCH 08/10] ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 10:45 ` [PATCH 10/10] ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk AnilKumar Ch
2012-11-05 13:46 ` [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar, Chimata
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add pinmux configurations for gpio based keys to am335x-evmsk. In
this patch, only single named mode/state is added and these pins
are configured during pinctrl driver initialization.
Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-evmsk.dts | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 7262fa8..0f825dd 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -32,7 +32,7 @@
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
- pinctrl-0 = <&user_leds_s0>;
+ pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
@@ -42,6 +42,15 @@
0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
>;
};
+
+ gpio_keys_s0: gpio_keys_s0 {
+ pinctrl-single,pins = <
+ 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
+ 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
+ 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */
+ 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
+ >;
+ };
};
ocp {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 10/10] ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
` (8 preceding siblings ...)
2012-11-05 10:45 ` [PATCH 09/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK AnilKumar Ch
@ 2012-11-05 10:45 ` AnilKumar Ch
2012-11-05 13:46 ` [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar, Chimata
10 siblings, 0 replies; 14+ messages in thread
From: AnilKumar Ch @ 2012-11-05 10:45 UTC (permalink / raw)
To: tony
Cc: b-cousson, linux-arm-kernel, linux-omap, grant.likely,
devicetree-discuss, AnilKumar Ch
Add gpio based push buttons device tree data to am335x-evmsk device
by adding all the necessary parameters like key-code, gpios and etc.
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
arch/arm/boot/dts/am335x-evmsk.dts | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 0f825dd..f5a6162 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -139,6 +139,37 @@
default-state = "off";
};
};
+
+ gpio_buttons: gpio_buttons@0 {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@1 {
+ label = "button0";
+ linux,code = <0x100>;
+ gpios = <&gpio3 3 0>;
+ };
+
+ switch@2 {
+ label = "button1";
+ linux,code = <0x101>;
+ gpios = <&gpio3 2 0>;
+ };
+
+ switch@3 {
+ label = "button2";
+ linux,code = <0x102>;
+ gpios = <&gpio1 30 0>;
+ gpio-key,wakeup;
+ };
+
+ switch@4 {
+ label = "button3";
+ linux,code = <0x103>;
+ gpios = <&gpio3 5 0>;
+ };
+ };
};
/include/ "tps65910.dtsi"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread* RE: [PATCH 00/10] ARM: dts: AM33XX: Add device tree data
2012-11-05 10:45 [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar Ch
` (9 preceding siblings ...)
2012-11-05 10:45 ` [PATCH 10/10] ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk AnilKumar Ch
@ 2012-11-05 13:46 ` AnilKumar, Chimata
2012-11-05 16:37 ` Benoit Cousson
10 siblings, 1 reply; 14+ messages in thread
From: AnilKumar, Chimata @ 2012-11-05 13:46 UTC (permalink / raw)
To: AnilKumar, Chimata, tony@atomide.com
Cc: Cousson, Benoit, linux-arm-kernel@lists.infradead.org,
linux-omap@vger.kernel.org, grant.likely@secretlab.ca,
devicetree-discuss@lists.ozlabs.org
On Mon, Nov 05, 2012 at 16:15:40, AnilKumar, Chimata wrote:
> Add device tree date for GPIO based various drivers matrix keypad,
> volume keys, push buttons and use leds accross three AM33XX devices
> viz EVM, BeagleBone and Starter Kit.
>
> To make it functional this series also adds pinctrl data for all
> the GPIOs used by various drivers. In this series only default state
> pinmux/conf settings are added because of sleep/idle state pinctrl
> values are not available.
>
> These patches are based on linux-omap-dt:for_3.8/dts tree and these
My bad, small correction in this statement, these patches apply cleanly
on linux-omap-dt:for_3.8/dts tree with the below two patches.
http://www.spinics.net/lists/arm-kernel/msg204872.html
http://www.spinics.net/lists/arm-kernel/msg204873.html
Thanks
AnilKumar
> were tested on am33xx devices according to added functionality.
>
> AnilKumar Ch (10):
> ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVM
> ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evm
> ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVM
> ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evm
> ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE
> ARM: dts: AM33XX: Add user-leds device tree data to am335x-bone
> ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK
> ARM: dts: AM33XX: Add user-leds device tree data to am335x-evmsk
> ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK
> ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk
>
> arch/arm/boot/dts/am335x-bone.dts | 44 +++++++++++++++++++
> arch/arm/boot/dts/am335x-evm.dts | 63 +++++++++++++++++++++++++++
> arch/arm/boot/dts/am335x-evmsk.dts | 84 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 191 insertions(+)
>
> --
> 1.7.9.5
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH 00/10] ARM: dts: AM33XX: Add device tree data
2012-11-05 13:46 ` [PATCH 00/10] ARM: dts: AM33XX: Add device tree data AnilKumar, Chimata
@ 2012-11-05 16:37 ` Benoit Cousson
2012-11-06 4:33 ` AnilKumar, Chimata
0 siblings, 1 reply; 14+ messages in thread
From: Benoit Cousson @ 2012-11-05 16:37 UTC (permalink / raw)
To: AnilKumar, Chimata
Cc: tony@atomide.com, linux-arm-kernel@lists.infradead.org,
linux-omap@vger.kernel.org, grant.likely@secretlab.ca,
devicetree-discuss@lists.ozlabs.org
Hi Anil,
On 11/05/2012 02:46 PM, AnilKumar, Chimata wrote:
> On Mon, Nov 05, 2012 at 16:15:40, AnilKumar, Chimata wrote:
>> Add device tree date for GPIO based various drivers matrix keypad,
>> volume keys, push buttons and use leds accross three AM33XX devices
>> viz EVM, BeagleBone and Starter Kit.
>>
>> To make it functional this series also adds pinctrl data for all
>> the GPIOs used by various drivers. In this series only default state
>> pinmux/conf settings are added because of sleep/idle state pinctrl
>> values are not available.
>>
>> These patches are based on linux-omap-dt:for_3.8/dts tree and these
>
> My bad, small correction in this statement, these patches apply cleanly
> on linux-omap-dt:for_3.8/dts tree with the below two patches.
> http://www.spinics.net/lists/arm-kernel/msg204872.html
> http://www.spinics.net/lists/arm-kernel/msg204873.html
Mmm, this 2 patches do have dependency on some driver changes that might
not be accepted for 3.8. And in fact I do have some comment on the RTC
one :-)
Don't you prefer to change the order to allow me to pull these ones first?
Thanks,
Benoit
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [PATCH 00/10] ARM: dts: AM33XX: Add device tree data
2012-11-05 16:37 ` Benoit Cousson
@ 2012-11-06 4:33 ` AnilKumar, Chimata
0 siblings, 0 replies; 14+ messages in thread
From: AnilKumar, Chimata @ 2012-11-06 4:33 UTC (permalink / raw)
To: Cousson, Benoit
Cc: tony@atomide.com, linux-arm-kernel@lists.infradead.org,
linux-omap@vger.kernel.org, grant.likely@secretlab.ca,
devicetree-discuss@lists.ozlabs.org
On Mon, Nov 05, 2012 at 22:07:45, Cousson, Benoit wrote:
> Hi Anil,
>
> On 11/05/2012 02:46 PM, AnilKumar, Chimata wrote:
> > On Mon, Nov 05, 2012 at 16:15:40, AnilKumar, Chimata wrote:
> >> Add device tree date for GPIO based various drivers matrix keypad,
> >> volume keys, push buttons and use leds accross three AM33XX devices
> >> viz EVM, BeagleBone and Starter Kit.
> >>
> >> To make it functional this series also adds pinctrl data for all
> >> the GPIOs used by various drivers. In this series only default state
> >> pinmux/conf settings are added because of sleep/idle state pinctrl
> >> values are not available.
> >>
> >> These patches are based on linux-omap-dt:for_3.8/dts tree and these
> >
> > My bad, small correction in this statement, these patches apply cleanly
> > on linux-omap-dt:for_3.8/dts tree with the below two patches.
> > http://www.spinics.net/lists/arm-kernel/msg204872.html
> > http://www.spinics.net/lists/arm-kernel/msg204873.html
>
> Mmm, this 2 patches do have dependency on some driver changes that might
> not be accepted for 3.8. And in fact I do have some comment on the RTC
> one :-)
> Don't you prefer to change the order to allow me to pull these ones first?
>
Today I will resend the patches by removing this dependency.
Thanks
AnilKumar
^ permalink raw reply [flat|nested] 14+ messages in thread