From mboxrd@z Thu Jan 1 00:00:00 1970 From: AnilKumar Ch Subject: [PATCH RESEND 07/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK Date: Tue, 6 Nov 2012 19:18:35 +0530 Message-ID: <1352209718-5586-8-git-send-email-anilkumar@ti.com> References: <1352209718-5586-1-git-send-email-anilkumar@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1352209718-5586-1-git-send-email-anilkumar@ti.com> Sender: linux-omap-owner@vger.kernel.org To: tony@atomide.com Cc: b-cousson@ti.com, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, grant.likely@secretlab.ca, devicetree-discuss@lists.ozlabs.org, AnilKumar Ch List-Id: devicetree@vger.kernel.org Add pinmux configurations for gpio based volume keys to am335x-evmsk. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch --- arch/arm/boot/dts/am335x-evmsk.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 6f53879..659ec5b 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -30,6 +30,20 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */ + 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */ + 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */ + 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; -- 1.7.9.5